Harwil Q-10 User manual

ULTRA RELIABLE SINCE 1956 P. 1
MODEL Q -10 HARWIL CORPORATION
541 KINETIC DRIVE, OXNARD, CA 93030
TEL: [phone] FAX: [phone]
EMAIL: [e-mail]
Q -10 N, Q -10VCR
PARTS LIST
FLUID FLOW SWITCH
⁄”
¾”
1⁄” A / F
1⁄”
ONE PIECE BODY, SWITCH
TUBE, COVER AND CABLE
1” NPT
ENCAPSULATED
MAGNET
ENCAPSULATED
REED SWITCH
18/2 SJT
UL APPROVED
CABLE, 0.33” O.D.
SONIC WELDED IN PLACE
STANDARD PLASTIC
OR METAL TEE
OPTIONAL DRAG
STRIP LENGTH
ONE PIECE DRAG
STRIP INCLUDING
MAGNET HOUSING
AND MOUNTING SCREW
TURBULENT
FLOW REDUCTION
MOUNT IN
THREE POSITIONS
2D
5D
INSTALLATION INSTRUCTION SHEET

ULTRA RELIABLE SINCE 1956P. 2
MODEL Q -10 HARWIL CORPORATION
541 KINETIC DRIVE, OXNARD, CA 93030
TEL: [phone] FAX: [phone]
EMAIL: [e-mail]
Q -10 N, Q -10VCR
CAUTION
INSTALLATION OR REMOVAL OF FLOW SWITCH FROM SMALL TEE
CORNER OF BLADE MAY HANG UP
USE A ROD OR SUITABLE TOOL
TO FREE ANY HANG UP IF IT OCCURS
WATCH THE BLADE TURNING

ULTRA RELIABLE SINCE 1956 P. 3ULTRA RELIABLE SINCE 1956
CERTIFICATE OF CONFORMANCE
All Harwil Corporation (“HARWIL”) products are manufactured using new materials and components.
Our products meet the applicable performance and materials specifications indicated in our current
Specifications Sheets and Parts List. HARWIL endeavors to obtain its materials and components from
American Companies.
DOMINANCE OF HARWIL LIMITED EXPRESS WARRANTY
Each user MUST make appropriate analysis and tests to determine the suitability of the HARWIL product
for the intended use prior to purchase.
HARWIL warrants that all HARWIL products will be free from defects in material and workmanship for a
period of one year from the date of original shipment. This Warranty shall be LIMITED to the replacement
and reconditioning of our products and parts. HARWIL reserves the right and sole discretion to modify
or change the composition, design and appearance of its products at anytime.
THIS WARRANTY SHALL BE IN LIEU OF ALL WARRANTIES OF MERCHANTABILITY AND OF ALL WAR-
RANTIES OF FITNESS FOR A PARTICULAR PURPOSE RELATING TO HARWIL PRODUCTS AND PARTS.
BUYER’S SOLE REMEDY SHALL BE REPLACEMENT OR RECONDITIONING AS SET FORTH HEREIN.
HARWIL SHALL INCUR NO OBLIGATIONS HEREUNDER AND NO LIABILITY IN THE EVENT OF (1)
BUYER NOT FULFILLING ITS RESPONSIBILITIES; INCLUDING AS SET FORTH HEREIN; (2) NEGLECT,
ALTERATION OR IMPROPER PRODUCT USE, INCLUDING USE WITH NON-COMPATIBLE DEVICES OR
CHEMICALS; OR (3) REPAIR BY ANOTHER COMPANY OR PERSON THAN HARWIL.
ANY LAWSUIT RELATING TO THIS LIMITED EXPRESS WARRANTY MUST BE COMMENCED WITHIN
ONE YEAR OF THE DATE THE LAWSUIT ACCRUES.
HARWIL provides NO WARRANTY and ASSUMES NO RESPONSIBILITY for corrosive attack on
any material, component or design features associated with any of its products.
Corrosion resistance information listed in HARWIL specification sheets, information sheets and product
brochures is solely for general background information. This information table has been compiled from
literature published by various material suppliers and by equipment manufacturers who use these materi-
als in their products. Inasmuch as these data are based on tests by entities over which HARWIL has no
control, HARWIL DOES NOT GUARANTEE AND DOES NOT ACCEPT ANY RESPONSIBILITY FOR THE
ACCURACY OF SUCH THIRD PARTY TESTING. When using the table, please remember that in any
given case several factors such as concentration, temperature, degrees of agitation and presence of impu-
rities influence the rate of corrosion. The information table is intended, in a general way, to rate materials
for resistance to chemicals which contain their usual impurities and for types of equipment in common
use. Ratings should be used only as a general tool to first approximation of your material requirements
rather than as the final answer.
WHEN IN DOUBT, TEST MATERIALS BEFORE INSTALLATION.
AFTER INSTALLATION, FOLLOW UP WITH SCHEDULED PREVENTATIVE MAINTENANCE AND
PERIODIC INSPECTION.
16270