Hathaway MERLOT User manual

MERLOT 9' & 12'
SHUFFLEBOARD TABLE
ASSEMBLY INSTRUCTIONS
BG1305/BG1312/BG50357/BG50358
Please Do Not Hesitate to
Contact Our Consumer Hotline
at 800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
Ver. 0520WS

THANK YOU!
Thank you for purchasing this product. We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.
2
CARE AND USE
1. This product is intended for INDOORuse only.
2. Do NOT drag the table when moving it, as this will damage the legs.
ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this game. You may want to carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts
List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some figures or drawings may not look exactly like product.
4. When installing parts that have more than one screw orbolt, hand tighten all screws orbolts
in place before final tightening with screwdriver orwrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS ITEM MAYCONTAIN SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
NOTE: This manual covers assembly of four similar shuffleboard tables, but size and wood
colors vary for each table. Please make sure you are looking at the Parts List (pages 3-6)
for your particular model number, if you need replacement parts.

3
8/21
MERLOT 9' SHUFFLEBOARD TABLE - BG1305
Parts List
HARDWARE PACK - NGP2219
PARTS
1A. NGP2210
B. NGP2211 2NGP2213 3NGP2214 4NGP2212 5NGP22123
TABLE BODY LEG LEG SHELF SHUFFLEBOARD
PUCKS
6NGP22124 9R. NGP2606
B. NGP2607
SLIDE SCORER
10 NGP2215
SHUFFLEBOARD
WAX EVA BUMPER
1A
9
2
10
Illustrations Not to Scale
X1
X2
X2 X2 X2
X2 X4 ea.
X4
23
CROSS FRAME
PANEL
ADDITIONAL EQUIPMENT
REQUIRED:
PHILLIPS HEAD
SCREWDRIVER
3
1
2
1
2
3
18 NGP2223 20 NG1221 23 NGP2216 26 NGP22131 28 NGP2218
LEG LEVELER LEG PANEL
CLIMATIC
ADJUSTER TUBE
X4
X3
X2 X2 X1
END FRAME
PANEL
78 11 12
WRENCH 5/16” WASHER CAM LOCK
SCREW
WOOD CAP
14 15
1-1/2” SCREW
16
BRACKET
X1 X4 X4 X8
X36 X48
X12 17
19 21 22 24
5/16” BOLT
25 27
1/4” WASHER STUD BOLT
WRENCH 1-1/4” SCREW
X8
X18 X18 X9 X1 X6 X12
1/4” STUD BOLT
SIDE FRAME
PANEL
SHUFFLEBOARD
BRUSH
29 NGP1222
X1
Cradle
Playfield
3/4” SCREW CAM LOCK
NUT
1/4” NUT
3
18
1B
4
5
6
26
28
For replacement parts please call 800-759-0977.
3
2
1
2
1
3
*Pre-assembled*Pre-assembled
*Pre-assembled
*Pre-assembled
*NOTE: Legs will come
pre-assembled using parts 2 & 26
and Hardware 16 & 17 (See pg. 8)
*Pre-assembled

MERLOT 12' SHUFFLEBOARD TABLE - BG1312
Parts List
HARDWARE PACK - NGP22191
PARTS
1A. NGP2220
B. NGP2221 2NGP2213 3NGP2214 4NGP2222 5NGP22223
TABLE BODY LEG LEG SHELF SHUFFLEBOARD
PUCKS
6NGP22224 9R. NGP2606
B. NGP2607
SLIDE SCORER
10 NGP2215
SHUFFLEBOARD
WAX EVA BUMPER
1A
9
2
10
Illustrations Not to Scale
X1
X2
X2 X2 X2
X2 X4 ea.
X4
23
CROSS FRAME
PANEL
3
1
2
1
2
3
18 NGP2217 20 NG1221 23 NGP2216 26 NGP22131 28 NGP2218
LEG LEVELER LEG PANEL
CLIMATIC
ADJUSTER TUBE
X4
X4
X2 X2 X1
END FRAME
PANEL
X40
X24 X24 X12
SIDE FRAME
PANEL
SHUFFLEBOARD
BRUSH
29 NGP1222
X1
Cradle
Playfield
3
18
1B
4
5
6
26
28
3
2
1
2
1
3
4
For replacement parts please call 800-759-0977.
5/20
*Pre-assembled
*Pre-assembled
*NOTE: Legs will come
pre-assembled using parts 2 & 26
and Hardware 16 & 17 (See pg. 8)
ADDITIONAL EQUIPMENT
REQUIRED:
PHILLIPS HEAD
SCREWDRIVER
78 11 12
WRENCH 5/16” WASHER CAM LOCK
SCREW
WOOD CAP
14 15
1-1/2” SCREW
16
BRACKET
X1 X4 X4 X8X48 X12 17
19 21 22 24
5/16” BOLT
25 27
1/4” WASHER STUD BOLT
WRENCH 1-1/4” SCREW
X8
X1 X6
X12
1/4” STUD BOLT
3/4” SCREW CAM LOCK
NUT
1/4” NUT
*Pre-assembled*Pre-assembled
*Pre-assembled

5
MERLOT 9' SHUFFLEBOARD TABLE, ESPRESSO - BG50358
Parts List
HARDWARE PACK - NGP2219
PARTS
1A. NGP7627
B. NGP2211 2NGP7628 3NGP7629 4NGP7630 5NGP7631
TABLE BODY LEG LEG SHELF SHUFFLEBOARD
PUCKS
6NGP7632 9R. NGP2606
B. NGP2607
SLIDE SCORER
10 NGP7633
SHUFFLEBOARD
WAX EVA BUMPER
1A
9
2
10
Illustrations Not to Scale
X1
X2
X2 X2 X2
X2 X4 ea.
X4
23
CROSS FRAME
PANEL
3
1
2
1
2
3
18 NGP2217 20 NG1221 23 NGP2216 26 NGP7634 28 NGP2218
LEG LEVELER LEG PANEL
CLIMATIC
ADJUSTER TUBE
X4
X3
X2 X2 X1
END FRAME
PANEL SIDE FRAME PANEL
SHUFFLEBOARD
BRUSH
29 NGP7639
X1
Cradle
Playfield
3
18
1B
4
5
6
26
28
For replacement parts please call 800-759-0977.
3
2
1
2
1
3
5/20
*Pre-assembled
*Pre-assembled
*NOTE: Legs will come
pre-assembled using parts 2 & 26
and Hardware 16 & 17 (See pg. 8)
ADDITIONAL EQUIPMENT
REQUIRED:
PHILLIPS HEAD
SCREWDRIVER
78 11 12
WRENCH 5/16” WASHER CAM LOCK
SCREW
WOOD CAP
14 15
1-1/2” SCREW
16
BRACKET
X1 X4 X4 X8X48 X12 17
19 21 22 24
5/16” BOLT
25 27
1/4” WASHER STUD BOLT
WRENCH 1-1/4” SCREW
X8
X1 X6
X12
1/4” STUD BOLT
3/4” SCREW CAM LOCK
NUT
1/4” NUT
*Pre-assembled*Pre-assembled
*Pre-assembled
X36
X18 X18 X9

MERLOT 12' SHUFFLEBOARD TABLE, ESPRESSO - BG50357
Parts List
HARDWARE PACK - NGP22191
PARTS
1A. NGP7635
B. NGP2221 2NGP7628 3NGP7629 4NGP7636 5NGP7637
TABLE BODY LEG LEG SHELF SHUFFLEBOARD
PUCKS
6NGP7638 9R. NGP2606
B. NGP2607
SLIDE SCORER
10 NGP7633
SHUFFLEBOARD
WAX EVA BUMPER
1A
9
2
10
Illustrations Not to Scale
X1
X2
X2 X2 X2
X2 X4 ea.
X4
23
CROSS FRAME
PANEL
3
1
2
1
2
3
18 NGP2217 20 NG1221 23 NGP2216 26 NGP7634 28 NGP2218
LEG LEVELER LEG PANEL
CLIMATIC
ADJUSTER TUBE
X4
X4
X2 X2 X1
END FRAME
PANEL SIDE FRAME PANEL
SHUFFLEBOARD
BRUSH
29 NGP7639
X1
Cradle
Playfield
3
18
1B
4
5
6
26
28
3
2
1
2
1
3
6
For replacement parts please call 800-759-0977.
5/20
*Pre-assembled
*Pre-assembled
*NOTE: Legs will come
pre-assembled using parts 2 & 26
and Hardware 16 & 17 (See pg. 8)
X40
X24 X24 X12 ADDITIONAL EQUIPMENT
REQUIRED:
PHILLIPS HEAD
SCREWDRIVER
78 11 12
WRENCH 5/16” WASHER CAM LOCK
SCREW
WOOD CAP
14 15
1-1/2” SCREW
16
BRACKET
X1 X4 X4 X8X48 X12 17
19 21 22 24
5/16” BOLT
25 27
1/4” WASHER STUD BOLT
WRENCH 1-1/4” SCREW
X8
X1 X6
X12
1/4” STUD BOLT
3/4” SCREW CAM LOCK
NUT
1/4” NUT
*Pre-assembled*Pre-assembled
*Pre-assembled

7
1
25
6
4
5
5
15
14
15
1
4
24
Point
down
Place table body upside down. Screw climatic adjuster
bolts into playfield.
Note: NG1312 will have four sets of holes
Assemble table frame
Center table frame on bottom of table body
and attach with screws (15)
ASSEMBLY INSTRUCTIONS
STEP 2
STEP 1
STEP 3
Note: For ease of assembly,
brackets are pre-installed.

22
21
23
27
2
3
26
Assemble climatic adjusters as shown.
Adjust bottom nuts so metal bar is parallel
to playfield bottom approx. 3/4” from surface.
Read instruction on pg. 8 carefully, if you
ever need to make an adjustment.
Since the legs are pre-assembled, all you need to do is attach Leg Shelf, 3, using Screws, 27, as shown.
21
22
24
8
ASSEMBLY INSTRUCTIONS (CONT.)
STEP 5
STEP 4

Bolt legs to table frame and add leg levelers
Turn table over, attach slide scorers and
wood caps. Place EVA bumpers on both ends.
Place in use location and level table.
9
ASSEMBLY INSTRUCTIONS (CONT.)
STEP 7
STEP 6
1
3
2
1
2
3
10
12
11
18
19
8
19
8
28
28

ASSEMBLY INSTRUCTIONS (CONT.)
10
Following these simple guidelines will ensure many years of enjoyment of your shueboard! Please call 800-759-0977
with any questions concerning your table. You may nd the following video helpful in making adjustments to your table
using the climatic adjusters: https://player.vimeo.com/video/7669642?title=0&byline=0&portrait=0