Hathaway SCOUT BG5027 User manual

Please Do Not Hesitate to
Contact Our Consumer Hotline
at 800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
Ver. 0220 BG5027
TABLE ASSEMBLY INSTRUCTIONS
SCOUT 54-IN. 4in1 MULTI-GAME

THANK YOU!
Thank you for purchasing this product. We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.
2
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT drag the table when moving it, as this will damage the legs.
ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this game. You may want to carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts
List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some figures or drawings may not look exactly like product.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or bolts
in place before final tightening with screwdriver or wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETYINSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS ITEM MAY CONTAIN SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.

Parts List
SCOUT 54-IN. 4in1 MULTI-GAME - BG5027/NG5027
For replacement parts please call 800-759-0977. 32/20
Illustrations Not to Scale
P1 NGP7365
TABLE BODY
P3 NGP6002 P4 NGP7366
LEG PANEL TABLE TENNIS
WHITE BOARD LEG LEVELER
P2 NGP6001
LEG
P5 NGP6004
P6 NGP7367
BASKETBALL ARM
P8 NGP6007 P9 NGP6008
BASKETBALL RIM BASKETBALL BALL RETURN NET
P7 NGP7368
BACKBOARD
P10 NGP7797
P11 NGP6010
STRIKER
P13 NGP6012 P14 NGP6013
TABLE TENNIS NET TABLE TENNIS POSTS TABLE TENNIS BALL
P12 NGP6011
PUCK
P15 NGP6014
P16 NGP6015
TABLE TENNIS PADDLE
P18 NGP6017 P19 NGP7369
ERASER BASKETBALL BRACKET 26mm BOLT
P17 NGP6016
MARKER
P20 NGP7370*
P21 NGP7370*
NUT
P23 NGP7370* P24 NGP7370*
1/4”x1” BUTTERFLY BOLT 1/2” SCREW AIR PUMP
P22 NGP7370*
WASHER
P25 NGP5035
P26 NGP7370*
ALLEN WRENCH
A
B
1/4”x1” BOLT
P27 NGP7370* *Items included in
Hardware Pack, NGP7370
BLOWER MOTOR
P28 NGP50801
(Pre-installed on Table)
P29 NGP7371
(Pre-installed on Table)
(Pre-installed on Table)
RIVET PLUG
X2
X1 X4
X2
X4
X2X2
X1
X2X1 X2
X1X1
X1
X1
X2
X2
X2
X1X2
X4
X16 X2X4 X12 X1
X16 X1X1 X2

4
THANK YOU!ASSEMBLY INSTRUCTIONS
1. Attach one LEG P2 to each corner of the TABLE BODY P1 using BOLTS P27 and WASHERS P22.
2. Attach LEG PANELS P3 to inside of LEGS P2 on each end of table using SCREWS P24 in pre-drilled holes.
3. Install one LEG LEVELER P5 on bottom of each Leg. Carefully turn table over onto legs.
4. Attach BASKETBALL RIM P8 onto BACKBOARD P7 using SCREWS P24 in pre-drilled holes.
P27
P27

5
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
5. Attach two BASKETBALL ARMS P6 onto end of TABLE BODY using pre-installed BRACKETS P19 and BOLTS P23.
6. Attach BACKBOARD P7 onto BASKETBALL ARMS P6 using four BOLTS P20 and NUTS P21 as shown.
P6
P23 P19 (Pre-installed)

6
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
7. Attach the BALL RETURN NET P10 to the two BASKETBALL ARMS P6 using the Velcro strips as shown.
8. Attach the black straps on the front sides of the BALL RETURN NET P10 to the sides of table using
pre-installed RIVET PLUGS P29.
P29

7
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Simply remove the basketball assembly to play AIR HOCKEY.
Place the dry erase board on top of the table
to create a DESK or ART/CRAFT AREA.
Flip the dry erase board over, insert the net posts
and net, and you’re ready for TABLE TENNIS.

180-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost tothe purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
8

Ver. 0220 BG5027
Contactez notre
service à la clientèle au
800-759-0977
avec des questions sur le montage
ou l'utilisation de ce produit.
TABLE MULTI-JEUX
SCOUT 4 en 1
INSTRUCTIONS D’ASSEMBLAGE

2
MERCI!
Merci d’avoir acheté notre produit. Nous travaillons 24 heures sur 24, partout dans le monde, à garantir
que nos produits sont de la meilleure qualité possible. Toutefois, dans les rares cas de problèmes lors
du montage ou de l'utilisation de ce produit, se il vous plaît communiquer avec notre service à la clientèle
au 800-759-0977 pour une aide immédiate avant de contacter votre revendeur. Pour obtenir de plus amples
renseignements, veuillez lire l'information relative à la garantie au verso de ce guide d’instructions.
ENTRETIEN ET USAGE
1. Ce produit doit être utilisé À L’INTÉRIEUR seulement.
2. NE JAMAIS déplacer la table en la traînant, cela pourrait endommager les pieds.
INSTRUCTIONS D’ASSEMBLAGE
1. Trouver une surface propre et plane, pour commencer le montage de votre table de jeu. La table
s’assemble à l’envers pour être ensuite retournée sur ses pieds, une fois l’assemblage complété.
Cette table est lourde et nécessite au moins deux adultes forts pour la soulever et la retourner.
2. Retirez le contenu de la boîte, avant de commencer l’assemblage, assurez-vous d’avoir toutes
les pièces telles que listées et illustrées au tableau d’identification. Avis : certaines pièces sont
préassemblées ou préinstallées.
3. Certaines illustrations ou dessins peuvent ne pas ressembler au produit que vous avez acheté.
4. Quand vous fixez en place une pièce avec plus d’une vis ou écrou, veuillez, en premier, les
visser à la main et terminer la fixation avec un tournevis ou une clé.
5. Un tournevis électrique peut être utile lors de l’assemblage, mais veuillez le régler à basse torque
et l’utiliser avec prudence; si la torque est trop élevée, la vis peut se défaire ou être trop serrée.
AVERTISSEMENTS!
LIRE TOUTES LES INSTRUCTIONS D’ASSEMBLAGE ET LES CONSIGNES DE SÉCURITÉ ATTENTIVEMENT.
RISQUE D’ÉTOUFFEMENT – CERTAINS ÉLÉMENTS DU PRODUIT CONTIENNENT
DE PETITES PIÈCES - NE CONVIENT PAS À UN ENFANT DE MOINS DE TROIS ANS.
IMPORTANT! VEUILLEZ LIRE, EN ENTIER, TOUTES LES
INSTRUCTIONS AVANT D’ASSEMBLER VOTRE PRODUIT.