Hatteland IP200 User manual

IP200
ETX Base Board
USER’S MANUAL
Version 1.2

ii IP200 User’s Manual
Acknowledgments
PS/2 are trademarks of International Business Machines
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.

IP200 User’s Manual iii
Table of Contents
Introduction.......................................................1
Specifications......................................................................1
Checklist..............................................................................2
Board Dimensions...............................................................3
Installations.......................................................5
Setting the Jumpers .............................................................6
Connectors on IP200.........................................................13

iv IP200 User’s Manual
This page was intentionally left blank.

INTRODUCTION
IP200 User’s Manual 1
Introduction
Specifications
Product Name IP200
Form Factor ETX base board (for ETX CPU modules)
Dimensions 7.5” x 9”
USB External connector x 1 (3 ports)
Pin-header x 1 (1 port)
TV - Out One pin-header for composite and S-video
VGA DB15 connector x 1 (for CRT)
Serial Ports External DB9 connectors x 4 (4 ports): for COM 1~4,
support RS232/422/485, and optical isolation support
(use Optocoupler: 6N137
Pin-header x 2 (2 ports): for COM5/6, support RS232.
Parallel Port External DB25 connector x 1 (supports SPP/EPP/ECP)
Keyboard/Mouse External PS/2 connector x 2 (for KB and MS)
Pin-header x 1 (for KB/MS)
Ethernet External RJ45 connector x 2, Pin header x 2
Compact Flash One compact flash connector with ejector
IDE Interface One 40-pin box-header (2.54mm for secondary IDE
One 44-pin PCB socket (2mm/RT angle) for primary IDE
Expansion Slots One PCI slot (for two PCI cards on riser card)
One PC/104 connector
One Micro PCI socket
IrDA Pin header
LCD Panel
Connector LVDS interface (Hirose DF13) connectors x 1
Audio Connector 1 x pin-header for Line-in, Line-out, Mic
1 x pin-header for CD IN (from Line-in)
Chipsets NetMos NM9845CV (PCI interface) x 1 and IMP16C552 x
1: support 4 COM ports
Intel 82541GI LAN controller x 1: Gigabit LAN controller
PWM LTC1628 x 1 : for power convert, output DC 5V &
3.3V, output current depend on input
Power Supply
Connector 1 x power connector for DC 12V input
Other
Connectors 1 x pin-Header for feature header (including: speaker,
power button, H/D reset button, HDD activity LED, status
LED, I2C bus, buzzer)
2 x fan connectors
1 x pin-header for panel backlight control
1 x 4-pin CD-ROM power outlet header
1 x 4-pin FDD power outlet header
Operation Temp. 0°C~60°C (32°F~140°F)
Storage Temp. -20°C~80°C (-68°F~176°F)
Relative Humidity 10%~90% (non-condensing)

INTRODUCTION
2 IP200 User’s Manual
Checklist
Your IP200 package should include the items listed below. Damaged or
missing items should be reported to your supplier.
•The IP200 ETX Baseboard
•This User’s Manual
•One compact disc containing the following:
•Ethernet Drivers
•Graphics Drivers
•Audio Drivers

INTRODUCTION
IP200 User’s Manual 3
Board Dimensions

INTRODUCTION
4 IP200 User’s Manual
This page is intentionally left blank.

INSTALLATIONS
IP200 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IP200 in order to set up a workable system. The topics
covered are:
Setting the Jumpers .............................................................6
Connectors on IP200.........................................................13

INSTALLATIONS
6 IP200 User’s Manual
Setting the Jumpers
Jumpers are used on the IP200 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IP200 and their respective functions.
Jumper Locations on IP200............................................................7
COM1 / COM2 / COM3 / COM4 RS232/422/485 Settings...........8
JP20: RI Setting for COM1 ............................................................9
JP19: RI Setting for COM2 ............................................................9
JP18: RI Setting for COM3 ............................................................9
JP17: RI Setting for COM4 ..........................................................10
JP9: RI Setting for COM5 ............................................................10
JP16: RI Setting for COM6 ..........................................................10
JP15: LVDS Voltage Setting........................................................10
JP21: CF Setting of Master/Slave.................................................11
JP22: Gigabit LAN Enable/Disable..............................................11
JP26: Audio Source Setting for Audio AMP................................11
J28: CMOS Setting.......................................................................11
J31: AT or ATX Mode Setting.....................................................12
JP27: UART Chip NM9845CV IDSEL Setting...........................12

INSTALLATIONS
IP200 User’s Manual 7
Jumper Locations on IP200
Jumper on IP200........................................................................Page
COM1 / COM2 / COM3 / COM4 RS232/422/485 Settings........... 8
JP20: RI Setting for COM1............................................................ 9
JP19: RI Setting for COM2............................................................ 9
JP18: RI Setting for COM3............................................................ 9
JP17: RI Setting for COM4.......................................................... 10
JP9: RI Setting for COM5............................................................ 10
JP16: RI Setting for COM6.......................................................... 10
JP15: LVDS Voltage Setting........................................................ 10
JP21: CF Setting of Master/Slave................................................. 11
JP22: Gigabit LAN Enable/Disable.............................................. 11
JP26: Audio Source Setting for Audio AMP ............................... 11
J28: CMOS Setting....................................................................... 11
J31: AT or ATX Mode Setting..................................................... 12
JP27: UART Chip NM9845CV IDSEL Setting........................... 12

INSTALLATIONS
8 IP200 User’s Manual
COM1 / COM2 / COM3 / COM4 RS232/422/485 Settings
The following tabled describe the jumper settings for RS232/422/485
selection.
COM1
Function RS-232 RS-422 RS-485
Jumper
Setting
(pin closed)
JP4:
None
JP8:
1-2 & 5-6
JP30:
1-2 & 5-6
JP4:
1-2
JP8:
3-4 & 7-8
JP30:
3-4 & 7-8
JP4:
3-4
JP8:
9-10
JP30:
9-10
COM2
Function RS-232 RS-422 RS-485
Jumper
Setting
(pin closed)
JP3:
None
JP7:
1-2 & 5-6
JP31:
1-2 & 5-6
JP3:
1-2
JP7:
3-4 & 7-8
JP31:
3-4 & 7-8
JP3:
3-4
JP7:
9-10
JP31:
9-10
COM3
Function RS-232 RS-422 RS-485
Jumper
Setting
(pin closed)
JP2:
None
JP6:
1-2 & 5-6
JP32:
1-2 & 5-6
JP2:
1-2
JP6:
3-4 & 7-8
JP32:
3-4 & 7-8
JP2:
3-4
JP6:
9-10
JP32:
9-10

INSTALLATIONS
IP200 User’s Manual 9
COM4
Function RS-232 RS-422 RS-485
Jumper
Setting
(pin closed)
JP1:
None
JP5:
1-2 & 5-6
JP33:
1-2 & 5-6
JP1:
1-2
JP5:
3-4 & 7-8
JP33:
3-4 & 7-8
JP1:
3-4
JP5:
9-10
JP33:
9-10
JP20: RI Setting for COM1
JP20 Setting Function
1-2 short +12V
3-4 short RI (default)
2 4 6
1 3 5 5-6 short +5V
JP19: RI Setting for COM2
JP19 Setting Function
1-2 short +12V
3-4 short RI (default)
2 4 6
1 3 5 5-6 short +5V
JP18: RI Setting for COM3
JP18 Setting Function
1-2 short +12V
3-4 short RI (default)
2 4 6
1 3 5 5-6 short +5V

INSTALLATIONS
10 IP200 User’s Manual
JP17: RI Setting for COM4
JP17 Setting Function
1-2 short +12V
3-4 short RI (default)
2 4 6
1 3 5 5-6 short +5V
JP9: RI Setting for COM5
JP9 Setting Function
1-2 short +12V
3-4 short RI (default)
2 4 6
1 3 5 5-6 short +5V
JP16: RI Setting for COM6
JP16 Setting Function
1-2 short +12V
3-4 short RI (default)
2 4 6
1 3 5 5-6 short +5V
JP15: LVDS Voltage Setting
JP15 Setting LAN2 Function
Pin 1-2
Short/Closed 3.3V (default)
Pin 2-3
Short/Closed 5V

INSTALLATIONS
IP200 User’s Manual 11
JP21: CF Setting of Master/Slave
JP21 Setting Function
Short Master
Open Slave (default)
JP22: Gigabit LAN Enable/Disable
JP22 Setting Gigabit LAN
Pin 1-2
Short/Closed Enable (default)
Pin 2-3
Short/Closed Disable
JP26: Audio Source Setting for Audio AMP
JP26 Setting Function
1-3, 2-4
short From AC97 Line out (default)
2 4 6
1 3 5 3-5, 4-6
short From speaker
J28: CMOS Setting
J28 Setting Function
Pin 1-2
Short/Closed Normal
Pin 2-3
Short/Closed Clear CMOS

INSTALLATIONS
12 IP200 User’s Manual
J31: AT or ATX Mode Setting
J31 Setting Function
Pin 1-2
Short/Closed ATX
Pin 2-3
Short/Closed AT
JP27: UART Chip NM9845CV IDSEL Setting
JP27 Setting IDSEL
Pin 1-2
Short/Closed AD23 (default)
Pin 2-3
Short/Closed AD22

INSTALLATIONS
IP200 User’s Manual 13
Connectors on IP200
The connectors on IP200 allows you to connect external devices such as
keyboard, floppy disk drives, hard disk drives, printers, etc.
Connector Locations on IP200..................................................... 14
X1, X2, X3, X4: ETX Connectors ............................................... 15
X1: PCI Bus, USB, Audio................................................................ 15
X2: ISA Bus ................................................................................... 15
X3: VGA, LVDS, COM1, COM2, LPT, IrDA, Mouse, Keyboard ........ 15
X4: IDE1, IDE2, Ethernet, Miscellaneous.......................................... 15
PCI1: PCI Slot.............................................................................. 15
CN1: VGA CRT Connector ......................................................... 15
CN2: Mouse Connector................................................................ 15
CN3: Keyboard Connector........................................................... 15
CN6: Parallel Port Connector....................................................... 16
J2: Keyboard/Mouse Pin Header Connector................................ 16
J4, J7: COM5 and COM6 Serial Ports ......................................... 16
CN4: COM1 and COM2 Serial Ports........................................... 17
CN5: COM3 and COM4 Serial Ports........................................... 17
J5: Internal Pin Header for Gigabit LAN..................................... 17
J6: Internal Pin Header for 10/100 LAN...................................... 17
CN8: 10/100 BaseT and Gigabit LAN Connectors...................... 18
J8: TV Out Pin Header Connector................................................ 18
J11: LVDS Panel Connector ........................................................ 18
J12: Secondary EIDE Connector.................................................. 18
J13: MicroPCI Socket .................................................................. 19
J16: PWM Fan Connector............................................................ 19
J17: DC Fan Connector................................................................ 19
J19: Power Connector .................................................................. 19
J20: System Function Connector.................................................. 20
J21: Audio Connector................................................................... 20
J22: CD-In Audio Connector ....................................................... 20
J23: Power Connector .................................................................. 20
J24: Compact Flash Socket .......................................................... 21
J25: Primary EIDE Connector...................................................... 21
J26: 12V Buzzer Pin Header ........................................................ 21
J30: Status Indicator Pin Header .................................................. 21
J14, J15: PC-104 Connector......................................................... 22

INSTALLATIONS
14 IP200 User’s Manual
Connector Locations on IP200
Connectors............................................................................................................................................................................................Page
X1, X2, X3, X4: ETX Connectors ...........................................................................................................................................................15
X1: PCI Bus, USB, Audio ................................................................................................................................................................................15
X2: ISA Bus .................................................................................................................................................................................................15
X3: VGA, LVDS, COM1, COM2, LPT, IrDA, Mouse, Keyboard...............................................................................................................................15
X4: IDE1, IDE2, Ethernet, Miscellaneous.............................................................................................................................................................15
PCI1: PCI Slot..........................................................................................................................................................................................15
CN1: VGA CRT Connector .....................................................................................................................................................................15
CN2: Mouse Connector............................................................................................................................................................................15
CN3: Keyboard Connector.......................................................................................................................................................................15
CN6: Parallel Port Connector...................................................................................................................................................................16
J2: Keyboard/Mouse Pin Header Connector ............................................................................................................................................16
J4, J7: COM5 and COM6 Serial Ports .....................................................................................................................................................16
CN4: COM1 and COM2 Serial Ports.......................................................................................................................................................17
CN5: COM3 and COM4 Serial Ports.......................................................................................................................................................17
J5: Internal Pin Header for Gigabit LAN..................................................................................................................................................17
J6: Internal Pin Header for 10/100 LAN ..................................................................................................................................................17
CN8: 10/100 BaseT and Gigabit LAN Connectors ..................................................................................................................................18
J8: TV Out Pin Header Connector............................................................................................................................................................18
J11: LVDS Panel Connector.....................................................................................................................................................................18
J12: Secondary EIDE Connector..............................................................................................................................................................18
J13: MicroPCI Socket ..............................................................................................................................................................................19
J16: PWM Fan Connector........................................................................................................................................................................19
J17: DC Fan Connector ............................................................................................................................................................................19
J19: Power Connector...............................................................................................................................................................................19
J20: System Function Connector..............................................................................................................................................................20
J21: Audio Connector...............................................................................................................................................................................20
J22: CD-In Audio Connector....................................................................................................................................................................20
J23: Power Connector...............................................................................................................................................................................20
J24: Compact Flash Socket.......................................................................................................................................................................21
J25: Primary EIDE Connector..................................................................................................................................................................21
J26: 12V Buzzer Pin Header....................................................................................................................................................................21
J30: Status Indicator Pin Header ..............................................................................................................................................................21
J14, J15: PC-104 Connector.....................................................................................................................................................................22

INSTALLATIONS
IP200 User’s Manual 15
X1, X2, X3, X4: ETX Connectors
X1: PCI Bus, USB, Audio
X2: ISA Bus
X3: VGA, LVDS, COM1, COM2, LPT, IrDA, Mouse, Keyboard
X4: IDE1, IDE2, Ethernet, Miscellaneous
PCI1: PCI Slot
CN1: VGA CRT Connector
CN1 is a DB-15 VGA connector. The following table shows the pin-out
assignments of this connector.
Signal Name Pin # Pin # Signal Name
Red 1 2 Green
Blue 3 4 N.C.
GND 5 6 GND
GND 7 8 GND
VCC 9 10 GND
N.C. 11 12 DDDA
HSYNC 13 14 VSYNC
DDDK 15
CN2: Mouse Connector
Pin # Signal Name
1 Mouse data
2 N.C.
3 GND
4 5V
5 Mouse clock
6 N.C.
CN3: Keyboard Connector
Pin # Signal Name
1 Keyboard data
2 N.C.
3 GND
4 5V
5 Keyboard clock
6 GND

INSTALLATIONS
16 IP200 User’s Manual
CN6: Parallel Port Connector
CN6 is a DB-25 external. The following table describes the pin-out
assignments of this connector.
Signal Name Pin # Pin # Signal Name
Line printer strobe 1 14 AutoFeed
PD0, parallel data 0 2 15 Error
PD1, parallel data 1 3 16 Initialize
PD2, parallel data 2 4 17 Select
PD3, parallel data 3 5 18 Ground
PD4, parallel data 4 6 19 Ground
PD5, parallel data 5 7 20 Ground
PD6, parallel data 6 8 21 Ground
PD7, parallel data 7 9 22 Ground
ACK, acknowledge 10 23 Ground
Busy 11 24 Ground
Paper empty 12 25 Ground
Select 13 N/A N/A
J2: Keyboard/Mouse Pin Header Connector
Signal Name Pin # Pin # Signal Name
NC 9 10 NC
MSCLK 7 8 KBCLK
MSDAT 5 6 KBDAT
Vcc 3 4 Vcc
Ground 1 2 Ground
J4, J7: COM5 and COM6 Serial Ports
Pin # Signal Name
1 DCD, Data carrier detect
3 RXD, Receive data
5 TXD, Transmit data
7 DTR, Data terminal ready
9 Ground
2 DSR, Data set ready
4 RTS, Request to send
6 CTS, Clear to send
8 RI, Ring indicator