Hauger PRINCESS GOLDEN VALOR User manual

www.haugerwatches.com
CONGRATULATIONS
We would like to congratulate you on having chosen one of our Hauger watches.
With passion for exquisite styles and timeless craftsmanship, our watches are built
with exclusive components from all over the world.

www.haugerwatches.com
WATCH MANUAL
INSTRUCTIONS
PRINCESS GOLDEN
VALOR 34MM
Our movements are carefully chosen from the best suppliers in Switzerland and
Japan. The metal parts are all made of the highest quality polished marine 316L
stainless steel. All our watches have anti reflective and scratch resistant domed
Sapphire crystal glass. The leather bracelets are made in genuine italian calf leather.
The water-resistance of all Hauger watches are 100m (10ATM)

www.haugerwatches.com
WATCH SPECIFICATIONS
Technical specifications
Material: 316L Marine grade stainless steel
or Diamond Like Carbon (DLC) coated
Diameter: 34mm without crown
Height: 8.35 with solid back
Length: 39.5mm lug to lug
Lug Width: 18mm
Finish: Polished
Water Resistance: 100m/330ft
Case Back: Solid steel screwed
Crystal: Domed, scratch-resistant sapphire
crystal with anti-reflective treatment inside.
Dial: Applied luminous indexes
Bezel: Polished
Hands: Sword hands with luminous
Crown: Polished
Bracelet: Stainless Steel with polished butterfly buckle
Watch Case: Delivered with a special customized wooden
watch box
Movement
Caliber: Swiss Ronda 705
Functions
Date
3 hands
Total Diameter: 10½’’’ 23.9mm
Height: 2.5mm
Jewels: 1 Jewels
Battery: 60 months
Accuracy: -10/+20 seconds per month
Battery specifications
Battery type: 371/SR920SW
Battery voltage: 1.55 V
Battery life: 60 Months
Part number RONDA: 3600.015.HGF

www.haugerwatches.com
WATCH SETTINGS
1
Display and functions
1. Hour hand
2. Minute hand
3. Second hand
4. Date display
5. Crown with 3 positions
I. Winding position (not pulled out)
II. Setting position for date (unscrewed*, half pulled out)
III. Setting position for time (unscrewed*, completely
pulled out)
3
2
4
5

www.haugerwatches.com
WATCH SETTINGS
Usage / Settings
Models with a screwed crown
To ensure that they remain water-resistant, some models
are fitted with a screwed crown. Before proceeding to
setting the time or date*, you must first unscrew the crown
before pulling it out to its outer positions.
Important: After each operation, you must always screw
the crown back down to ensure that your watch remains
water-resistant
Setting the time
Carefully pull the crown into position III (3); the watch stops
at this point. Turn the crown forwards or backwards until
the hands display the correct time.
Advice on how to synchronise your watch
To synchronise the seconds hand (3) with an ocial time
signal (radio/TV/Internet), pull the crown out into position
III when the seconds hand reaches the 60 second (or 12
o’clock) position. This then stops. At the tone, press the
crown back into position I(and tighten it down if you have
a model with a screwed crown).
Rapid correction of the date*
Important: Do not set the date* between 10pm and 2
am (the movement is in the process of changing date at
these times), if your model have a screwed crown.
Pull the crown out into position II and turn it backwards
until the correct date (4) is displayed. During this operation,
your watch will continue to function normally, so you will
not need to alter the time.
Note: When setting the time, if the chronometer is
engaged, the hand on the 12-hour counter will turn
together with the hour hand of the watch.
Care and maintenance
We would advise you to clean your watch regularly (except
for the leather strap) using a soft cloth and warm soapy
water. After immersion in salty water, rinse it in fresh water
and leave it to dry completely.
Do not leave it anywhere where it might be subjected
to major variation in temperature or humidity, in direct
sunlight or near strong magnetic fields.
To benefit from the highest standards of service and to
ensure your guarantee remains in force, please always
contact an authorised high-end watch dealer.
The high-quality mechanism of your HAUGER watch will
give you complete satisfaction for many years provided
that you take proper care of it. However, we would advise
you to have your watch inspected every 3 to 4 years by an
authorised high-end watch dealer.