Citizen 6P00 User manual

6P00 6P20 6P21 6P24 6P80
10 ½’’’
Size
<ligne>
Height
<mm> 3.45
Accuracy
<per Month> 20 sec
1,000pcs
Original
Package
Clearance
Movement
0.3-0.4mm
0.15mm
Hand
case
3 years
Battery
Life
Battery consumption could be minimum
by pulling out the stem (=Power-Saving)
Minute 0.40
Second 0.07
Small 0.02
Date(6P80) 0.26
Balance
Weight
< N.m>
Φ22.6
Pusher
SR621SW
Attached
Stem
065-379
DO NOT set Day and Date
between 9:00pm – 1:00am
Setting the Month
Setting the Time and Day
Setting the Date and Moon disk
31
SUN
6P206P00
Month
AUG
SUN
Day
31
Date
AUG
Month
 
Moon
Phase
AUG
31
SUN
Pointe Date
SUN
Day
6P80
AUG
SUN
6P246P21
31
SUN

MOVEMENT SPECIFICATIONS
CAL.
6P00/20/21/24/26
ANALOG QUARTZ MOV'T
BY CITIZEN WATCH CO., LTD. JAPAN
MULTI - EYES RANGE
MANUFACTURED IN JAPAN
1.BASIC SPECIFICATION
(1) CAL. NO.
CALIBRE
6P00
6P20
6P21
6P24
6P26
Ligne
'10-1/2
Size*mm
22.6 x 22.6 x
Φ23.3
Φ23.3Φ23.3
Φ23.3
Total height
3.45mm
Hands
6
5
5
3
4
ate
○
○○
○ ○
○○
○ ○
○○
○ Ｘ
ＸＸ
Ｘ ○
○○
○
ay of Week
○
○○
○ ○
○○
○ ○
○○
○ Ｘ
ＸＸ
Ｘ Ｘ
ＸＸ
Ｘ
Moon Phase
○
○○
○ ○
○○
○ ○
○○
○ ○
○○
○ Ｘ
ＸＸ
Ｘ
oon phase color BLUE BLUE BLUE GREY
GREYGREY
GREY Ｘ
ＸＸ
Ｘ
Month
○
○○
○ Ｘ
ＸＸ
Ｘ Ｘ
ＸＸ
Ｘ Ｘ
ＸＸ
Ｘ Ｘ
ＸＸ
Ｘ
Battery life
3Year
Battery
SR621SW
or equivalent
(2) Ti e standard
Type of quartz : Tuning fork type quartz crystal
Frequency : 32,768Hz
Accuracy :
+/-20 s/month
worn under nor al circu stances
(3) Battery installed
Type of battery : Silver oxide SR621SW or equivalent
(4) Others
Driving syste s : Two-pole stepping otor
(5) Balanceable weight of hand
Minute hand Max. 0.4 μN･
Second hand Max. 0.07 μN･
(6) Additional Mechanisms
Power conservation switch
: Pull out the crown to the second click
Second hand stopping devise
: Pull out the crown to the second click
2. SEPARATED PARTS
* Setting ste
065-379
Length of ove ent center to ste end...
20.03
Thread.................................
Ф0.9 x 12.18
3. Othe s
* Measu ement of time ate
The unit(gate) ti e of easure ent ust be set at "10s " or integer fold
value of 10s owing to the DFC syste , and the easure ent ust be
perfor ed in the for of co plete watch.
* Ma king on movement
6P**
MIYOTA CO. UNADJUSTED
NO JEWEL
JAPAN
* Typical clea ance
Mov't - Caseback
ini u 150 µ or ore
Top of hands - Glass
300 - 400 µ *
* depending and subject to the glass and case structure, and hand length

4. Notice Of Casing
(1) The onth corrector button should be hidden for preventing the error of action.
(2) The returning pressure of the onth corrector button should be Min.200g
5.Setting Inst uctions
(1) setting the day (it can NOT be set by quick-adjust ent.) ( 6P00,6P20,6P21 )
Set the day by pulling out the crown to second click position and rotating it forward
( to rotate the hour and inute hands clockwise).
If the day is set by rotating the crown backyard (rotating the hour and inute hands
counter-clockwise), the date ay not be changed.
Note: The day is changed during the period fro about 0:00 AM to about 5:30 AM
(2) Setting the date (Quick change function) ( 6P00,6P20,6P21,6P26 )
Pull the crown out to the first click position and set the date by rotating the crown
backyard.
If the date is set beween 9:00 PM and 0:00 AM, the date will not change correctly.
(3) Setting the nor al ti e ( for ALL caliber )
Pull the crown out to the second click position when the second hand reaches the
12 o'clock position so that the second hand stops there.
Then set the hour and inute hands.
When setting the inute hand, put it 4 to 5 inutes earlier than the ti e to be set,
and then turn it back to the correct ti e.
Note: The day is changed during the period fro about 0:00 AM to about 5:30 AM.
After the ti e is set, push the crown back si ultaneously with the ti e signal.
The second hand will start running at the sa e ti e.
(4) Setting the onth ( 6P00 )
Each ti e the onth setting button is pushed, the onth is oved clockwise by
one onth. If the button is not pushed to the end, the onth is not changed perfectly.
Be sure to push it to the end fir ly.
The onth changes at about 0:00 AM on the 1st day of the next onth.
Note: Do not change the onth while the date hand lies between the 26th and the 31st.
In this case, set the date hand out of this period to adjust the onth after this operation,
set the date hand again.
When the ti e passes fro a onth with 30 or less days to a 31-day onth, please
correct the date hand. The onth is also changed auto atically.
(5) Reading and setting the age of the oon. ( 6P00,6P20,6P21,6P24 )
Age of the oon
The age of the oon is deter ined by the period between each new oon. This period
is approxi ately 29.5days.
New Moon First quarter oon Full oon Last quarter oon
Moon's age : 0 Moon's age : 7 Moon's age : 15 Moon's age : 22
Spring tide Neap tide Spring tide Neap tide
** index of oon age
The oon dial represents the age of the oon: The actual shape of the oon during each
phase in not represented.
Use the oon dial indication as a guide to the age or phase of the oon
Setting age of the oon
Check the newspaper or another source that lists the current age of the oon.
Reffering to above **index , set the oon dial to the age (0,7,15 or 22) closest to that index position.
More accurate settings can be ade at the ti e of the new oon (0) or full oon (15)
This specifications might be changed without prior notice.

MIYOTA
6P24-00A

MIYOTA

***** CAL.
6P24
MOV'T PARTS LIST *****
ORIGINAL PARTS, MADE IN JAPAN
PART NAME 6P24
BATTERY
280-340
BATTERY CONNECTOR SPRING
231-163
CALENDAR CORRECTING PILLAR WHEEL
255-340
CANNON PINION WITH DRIVING WHEEL
028-196
CENTER WHEEL COCK
711-183
CL TCH WHEEL
064-790
COIL NIT
246-121
DATE CORRECTOR WHEEL
213-330
DATE DIAL DRIVING WHEEL
103-970
DATE FINGER
106-740
DIAL G ARD
293-870
ELECTRINIC CIRC IT NIT
279-735
FIFTH WHEEL & PINION
084-460
FO RTH WHEEL & PINION
023-205
HO R WHEEL
075-328
INTERMEDIATE DATE CORRECTING WHEEL
087-620
INTERMEDIATE DATE WHEEL(1)
100-330
INTERMEDIATE MOON AGE CORRECTOR WHEEL
087-790
MIN TE WHEEL AND PINION
072-890
MOON PHASE J MPER
109-540
MOON PHASE PLATE
307-750
MOON PHASE ST D PIN
107-302
ROTOR
285-800
SCREW FOR CALENDAR G ARD(X3)
929-520
SCREW FOR TRAIN FOR BRIDGE(X3)
923-810
SETTING LEVER
067-173
SETTING LEVER SPRING
077-109
SETTING STEM
065-379
SETTING WHEEL
076-640
SPACER FOR SETTING STEM
212-146
SPACER FOR TRAIN WHEEL BRIDGE(2)
027-101
STATOR
190-790
THIRD WHEEL AND PINION
017-119
TRAIN WHEEL BRIDGE
701-F11
YOKE
071-970
LONGER SETTING STEM(20.985MM) 065-407
LONGER SETTING STEM(23.985MM) *standard
065-426

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT
CALIBRE NO. 6P24
MULTI FUNCTION
BATTERY : SR621SW
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) READING AND SETTING THE AGE OF THE MOON
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
C) READING AND SETTING THE AGE OF THE MOON
The age of the moon is determined by the period between each new moon.
This period is approximately 29.5days.
** index of moon age
The moon dial represents the age of the moon : The actual shape of the moon during each phase
is not represented.
Use the moon dial indication as a guide to the age or phase of the moon.
Setting age of the moon.
Check the newspaper or other source that lists the current age of the moon.
Reffering to above **index, set the moon dial to the age(0,7,15 or 22) closest to that index position.
More accurate settings can be made at the time of the new moon (0) or full moon (15).
Setting procedure
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clock-wise to set the moon dial.
3. After the moon dial has been set, push the crown back to Normal Position.
UNIVERSAL MASTERPIECE BORN IN JAPAN
MADE IN JAPAN
METAL MOVEMENT
These s
p
ecifications mi
g
ht be chan
g
ed without
p
rior notice.
New Moon
Moon's age : 0
Spring tide
First quarter moon
Moon's age : 7
Neap tide
Full moon
Moon's age : 15
Spring tide
Last quarter moon
Moon's age : 22
Neap tide
Minute Hand
Hour Hand
Normal Position
1st Click Position
Second Hand
2nd Click Position
Moon Phase