
This machine is built for intensive professional use in an commercial environment. The
manufacturer reserves the right to make changes to improve the design of the product without
notice. Minor changes may not be documented.
IMPORTANT!!!
Before you use your Talon, read the following instructions:
1. Do not run the brush or pad on the power cord. If the cord is damaged, contact
your local distributor for replacement of the power cord.
2. Make sure personnel using the machine has the required skill and has been in
formed about the safety requirements when using the unit.
3. When changing accessories, or during maintenance, make sure to unplug the
power cord.
4. Make sure that the accessory you are using conforms with the surface you are
cleaning.
INSTALLATION OF ACCESSORIES
1. Be sure to choose the correct accessory for the work you are going to perform.
2. A tri-lock system holds the accessory to the drive plate. To install or change
accessories, press drive lock button and twist accessories on.
3. To use the machine, plug the unit into a grounded wall outlet and press the switch
to turn the machine on.
Specications
Model# TALON
Part# F0036-115
Power Supply Input 115V 60 Hz AC
Motor 1/8 HP, 115V AC, 1.14A
Cord 50’, 16-3, Yellow, Detachable
Brush Size 6 or 8 Inch
Brush Speed 500
Dimensions 6” x 11” x 47”
Weight 10.5lbs (Cord not included in
weight)
Shipping Weight 21 lbs.