Hawkeye Mfg Little Pilot User manual


www.CNfpv.com
Dual Receivers
DVR - for tracking lost drones
Thanks for choosing Hawkeye!
-Hawkeye present
V3.1


www.CNfpv.com
Specifications and Features :
 Mu ti-Function button
 Video input

 Video out
 Power button
 Power LED
 DC port
 SD card s ot
8


www.CNfpv.com
LED Screen
Disp ay reso ution 800×480
Back ight LED
Brightness 700 Lux
Aspect ratio 16：9 / 4:3
Response time <10ms
Co or system PAL/NTSC
Input Signa Video（PAL/NTSC）
Specification
Monitor size 128.5mm×83.5mm×14mm
Gross weight 120g
5.8G Sensitivity -94dB
Matching antenna
interface interface RP-SMA
Video RAM Reso utions PAL: 720*288
NTSC: 720*240
SD Card 8-32G C10
Features:
Specia y designed for aeria photography system, Litt e pi ot a -in-one monitor
has the fo owing features:
Video buffer. Can record and p ayback on the monitor.
Dual receivers.
High brightness: 700 Lux.
No delay blue black screen.
Auto manual channel scan: no need for DIP switch.
Reminder: For better display /record quality, please
set the camera to NTSC format .
Button Description
Button name Function Shortcut function
Record Start/Stop record /
confirm format
Adjustment
button(+) Item increase
Press 2 seconds for Auto
channe search in FPV;
Switch interface
Adjustment
button(-) Item decrease Grid disp ay /Press 2sec to switch channe
Power/Menu button Enter menu Press 3 seconds to Power
on/off
Note: Three disp ay interfaces are:


www.CNfpv.com
FPV interface, RAM interface(video buffer) ,External video interface.



 !"#


$%& 
''()*!"+ ' ' ' ',--


FPV Interface :
Voltage indicator: input vo tage va ue is disp ayed.
Time indicator: monitor running time is disp ayed.
Signal strength indicator: the strength of both the signa s received by ANT1 and
ANT2 is disp ayed.
SD card icon Green: SD card ok.
SD card icon Red: No SD card.
SD card icon Grey: Need to format SD card in the monitor. Format SD card for
the first time.
Red “R”: Recording .
RAM Interface :
 &. /0 11)2-&"'
3343 
 


External video Interface :

Display Interface Setting:
Press Menu button to pop up menu :
 3343 
BAND A
FREQ A1 5645
BRI 25
CON 25
SAT 25
DISPLAY 16:9
SHARP 05
LIGHT 10
OSD ON
VOL TUNE +0
LANGUAGE ENGLISH
SPEAKER ON
TI E
DEFAULT
FAR AT
EXIT



Frequency Group Selection:
You can se ect the desired frequency from 6 groups: A、B、C、D、E and F:
A B C D E F
1 5.645G 5.740G 5.725G 5.733G 5.658G 5.362G
2 5.665G 5.760G 5.745G 5.752G 5.695G 5.399G
3 5.865G 5.780G 5.765G 5.771G 5.732G 5.436G
4 5.705G 5.800G 5.785G 5.790G 5.769G 5.473G
5 5.885G 5.820G 5.805G 5.809G 5.806G 5.510G
6 5.905G 5.840G 5.825G 5.828G 5.843G 5.547G
7 5.925G 5.860G 5.845G 5.847G 5.880G 5.584G
8 5.945G 5.880G 5.865G 5.866G 5.917G 5.621G
Brightness:
LEFT (-), RIGHT (+) to set in the menu.Range: 1-50.
Contrast:
LEFT (-), RIGHT (+) to set in the menu.Range: 1-50.
Saturation:
LEFT (-), RIGHT (+) to set in the menu.Range: 1-50.
DISPLAY:
Se ect disp ay ratio 16:9 or 4:3;.
SHARP:
Sharpness of the image. Note: the sharpness of NTSC/PAL are saved
independent y.
LIGHT:
Set the brightness of the LED ights：1-10.
OSD:
OSD disp ay ON/OFF.
VOLATGE TUNE:
You can fine tune the va ue of the vo tage disp ay
Language:
Eng ish/Chinese.
SPEAKER:
Set speaker ON/OFF..


DEFAULT:
Reset to defau t settings.
FORMAT:
Format the SD card, Use -, + button to se ect YES/NO . Use Record/OK button
to confirm.
Format the SD card at the first time.
Don’t mixed use the SD cards with other machines.
EXIT:
Exit menu.
Auto Channel Search
Press “+ button” for 2 seconds to start auto channe search. The channe with
the strongest signa wi be chosen.
Interface switching
Press “+ ” or “ -” button for 2 seconds to switch.
Recording ：
Insert SD card, 8-32G, C10. Note: It is recommended to equip a SD card
separately and do not mix it with other equipment. Suggest Micro SD Card :
Sandisk C10.
Format SD card in the monitor for the first time to use.
Make sure you are in FPV interface.


3. Press Record / OK button, an red R wi be shown:
4. Press again to stop record.
Note: In Snow signal, the DVR won’t record; until the video is in.
6. When in Externa video interface, the monitor wi record the externa video.
7. Note: The video was buffer in to the SD card, when the wireless signal is
not stable, it will cause frame drop.
Note: How to format SD card please bar code check below. When format
the SD card,the little pilot will allocate the storage of the SD card. When you
check on computer, the SD card will show ”full”, that’s normal, KEEP CALM.
Bad SD Card:
When detected bad SD card, the Litt e Pi ot wi pop up a menu; P ease power off
and then change a good SD card(Sandisk C10).
Video Buffer Playback ：
In FPV interface, press and ho d - button for 2 seconds, the monitor switch to
DVR interface . You can use Record/OK button to p ayback the video . Press Menu
button to de ete current fi e , Record/OK button to confirm.
Video buffer is on y designed to track the ost drones.The video qua ity is not so


good.We suggested: VLC Player on computer.
Battery Charging
Connect the monitor to a phone charger via Micro USB cab e. We suggested to
use 1-2A chargers and turn off the monitor whi e charging. The Charging Status LED
wi turn OFF when the battery is fu y charged.
FAQ:
Note： Reset all the settings in the menu if you meet any problem.
Not able to search channels automatically:
Auto channe scan on y functions in the FPV interface.
The video displayed is black-and-white:
Check whether the camera output is b ack-and-white (some cameras might
automatica y shift to b ack-and-white in ow- ight conditions)
Can not power on:
Hard Reset the machine by pressing the reset button .
No channel can be received:
Insta antennas, and move the monitor c ose to the 5.8 GHz transmitter.
Connect video signa to the transmitter.
Voltage and time do not display:
Make sure the OSD is "ON" .
Reset the monitor.
Frame Drop in playback:
Its norma case. When the wire ess signa is not stab e, it wi cause frame
drop.Video buffer is on y designed to track the ost drones.
Playback on computer:
Please set the player to 4:3 size.
Player we suggested: VLC Player.