Hawking HWMP1 - User manual






Overview
Check Package Contents
Wireless Multimedia Control Pad
Control Pad Receiver
USB Power Cable
User Manual + Quick Guide
Warranty Information
Table of Contents:
1. Introduction
2. Features
3. Function Description
4. Dimensions
5. Specification


Quick Start:
Your wireless multimedia control pad uses RF technology to connect to your Media
device and comes with 650mAh battery built-in. Read these instructions to learn about
the indicator light, and how to use the keypad/mouse mode.
Introduction:
This innovative wireless touch-pad has all the functions of a standard wireless mouse
and keyboard in one portable device. Combining an advanced RF transceiver, an easy-
to-use miniature Touch-Pad, a built-in G-sensor and a backlight keyboard, allows you to
effortlessly control your target by just slightly moving or touching your thumb on the
Touch-Pad. With this device, you can now wirelessly maneuver your Laptop, PC, Media
center & STB while you are walking around the classroom, conducting a meeting, or
simply lounging in the living room. Great for assisting normal users & lecturers, the
wireless multi-media control pad is essential for remotely operating your media center,
laptop, AIO PC and digital interface TVs.




To begin, simply remove the Control
Pad Receiver from the top of the
Control Pad and insert it into your
USB drive. Power-on the Control Pad
and wait for the blue LED light to flash
three times.


Function description
To switch between modes, simply press and hold the “home” button for two seconds.
Keypad Mode


Cursor Mode


Charging
Plug in the USB cable to the USB Charging Port and any USB power source (USB
charger or computer USB port) to charge the device.
Features
Advanced RF technology allows it to work at any location and from any direction;
there is no need to point it at the computer.
The Touch-Pad makes cursor movement smooth, easy and comfortable.
Backlit keyboard helps you maneuver content seamlessly.
Internal G-sensor robot automatically adapts itself to orientation changes and
rotates pictures with one simple movement.
High capacity rechargeable battery lasts up to 3200 hours and charges internally
when connected through any USB port.
Plug-and-play installation automatically integrates your computer and device
without any extra drivers.
Specifications


RF 2.4G reliable wireless
Wireless connection with up to 20 meter range (Open space)
Supports 1 or 2 finger touch applications
Internal G-sensor
Low power consumption supports up to 3200 hours of standby
Plug & Play
Win, MAC & Linux base supported
Backlight keyboard operation
USB rechargeable power design (requires only one hour to fully charge)
FAQ
Please visit http://www.hawkingtech.com for constantly updated FAQ.
COPYRIGHT


Copyright ©2010 by Hawking Technologies, Inc. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission of this company. LIMITED WARRANTY
Hawking Technology guarantees that every HWMP1 Hawking Wireless Multi-Media Control Pad is free from physical
defects in material and workmanship under normal use for one (1) year from the date of purchase. If the product proves
defective during this one-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization
number. Warranty is for repair or replacement only. Hawking Technology does not issue any refunds. BE SURE TO
HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS CAN NOT BE PROCESSED WITHOUT PROOF OF
PURCHASE. When returning a product, mark the Return Authorization number clearly on the outside of the package and
include your original proof of purchase.
IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE PRICE PAID FOR THE PRODUCT FROM
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE
PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION. Hawking Technology makes no warranty
or representation, expressed, implied or statutory, with respect to its products or the contents or use of this documentation
and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any
particular purpose. Hawking Technology reserves the right to revise or updates its products, software, or documentation
without obligation to notify any individual or entity. Please direct all inquiries to: [email protected]
Federal Communication Commission
Interference Statement
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a


residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm
spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist
and feet) during wireless modes of operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to
avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 20cm (8 inches) during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
R&TTE Compliance Statement


This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual
recognition of their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and
Satellite Earth Station Equipment) As of April 8, 2000. Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention
must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines
of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.