HAYGAIN HG-600 User manual

Haygain
®
HG-600 Hay Steamer
User Manual

HAYGAIN HG 600 Hay Steamer Manual
2 © Haygain
Contents
Contents ..................................................................................................................................2
About your Haygain® HG 600 hay steamer ...........................................................................3
Safety ......................................................................................................................................4
General safety ............................................................................................................................ 4
Electrical safety .......................................................................................................................... 5
Getting started ........................................................................................................................5
Unpacking your Haygain® hay steamer ...................................................................................... 5
Hay chest ................................................................................................................................... 7
Steam generator ........................................................................................................................ 8
Where to set up your Haygain® hay steamer .............................................................................. 9
Connecting the steam generator to the hay chest .................................................................... 10
Using your Haygain® hay steamer ....................................................................................... 11
Fill the steam generator with water ........................................................................................... 11
Load hay into the hay chest ..................................................................................................... 12
Steam hay in the hay chest ...................................................................................................... 13
Unload hay from the hay chest ................................................................................................. 14
Working in freezing conditions ................................................................................................. 15
Maintenance .......................................................................................................................... 16
Cleaning the hay chest ............................................................................................................. 16
Cleaning the steam generators ................................................................................................ 16
Descaling a steam generator ................................................................................................... 17
Storing your Haygain® hay steamer for long periods of time ..................................................... 18
Support .................................................................................................................................. 19
Warranty ................................................................................................................................ 20

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 3
About your Haygain
®
HG 600 hay steamer
Congratulations on purchasing your Haygain
®
HG 600 hay steamer!
Your Haygain
®
hay steamer is the only system scientifically proven to kill mold spores and
bacteria in hay and remove the potentially allergenic respirable dust. Steamed hay helps to
protect your horse from harmful dust and microorganisms.
Here at Haygain
®
we are committed to improving the health and well-being of your horse. To see
other ways that we can help you and your horse please visit www.equi-sales.dk.
You must always steam hay in the hay steamer for at least 80 minutes and until the thermometer
reads at least 80°C, also called the green zone at the thermometer. The minimum time for
steaming is based on an ambient temperature of 15°C and enough power supply.
About this user manual
This user manual describes how to safely use and maintain your Haygain
®
hay steamer, and how
to get the best results from it. To watch some helpful videos or see frequently asked questions,
visit www.equi-sales.dk.
Read this user manual before use
Before you get started, read this user manual. When you use your
Haygain
®
hay steamer, follow all instructions carefully and safely.
Disclaimer
We have made every effort to ensure that the information in this user manual is correct at the time
of publishing. However, we reserve the right to change the information at any time without notice.
Failure to observe the requirements of this user manual may cause harm or injury to you or your
horse and may invalidate the warranty.
This equipment is designed for steaming hay and should not be modified in any way. We accept
no liability for misuse or unauthorized modifications to your Haygain
®
hay steamer.
Contact Us
We are here to help. If you have any questions or comments, please get in touch. To see the
contact details for your region, visit www.equi-sales.dk.

HAYGAIN HG 600 Hay Steamer Manual
4 © Haygain
Safety
Read this section carefully before setting up and using your Haygain
®
hay steamer.
General safety
Use your Haygain
®
hay steamer in a safe place
To prevent hazards and damage to your Haygain
®
hay steamer, use it in a
location that meets the specifications on page 8. Keep the area around the
hay steamer clear from loose hay and other debris.
Keep children and animals safe
Keep children and animals away from your Haygain® hay steamer.
Hot steam and temperatures can cause burns
When the steam generator is switched on, it produces hot steam that fills
the hay chest via the steam hose. Take care when opening the hay chest
during or immediately after use as steam will escape when the lid is
opened. Areas of the hay chest, for example the manifold spikes, can get
very hot. Take care when you steam hay and unload it.
Before you open the cap of the steam generator, allow it to cool down. Do
not stand over the steam generator when you unscrew the cap. Do not
pour cold water over a hot heating element.
Take care when opening bales immediately after steaming as they can be
extremely hot.
Handle your Haygain
®
hay steamer with care
Do not carry or move the hay chest or steam generator when in use. Do
not use sharp objects, for example hay forks, inside the hay chest. Do not
stand or drop a steam generator on the hay chest.
Maintain your Haygain
®
hay steamer
Follow the maintenance instructions in this user manual. If you do not
maintain your Haygain
®
hay steamer, it may stop working or become
dangerous.
If any part of your Haygain
®
hay steamer is damaged, including the steam
hose, electrical cable or thermometer, do not use it. Contact us for help.
Use only genuine Haygain
®
spare parts and approved accessories.

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 5
Electrical safety
Electrical equipment can be dangerous
Ensure your electrical setup meets the specifications for the steam
generators. If you have any questions about your electrical setup, contact
a qualified electrician.
Poor electrical connections can be a fire hazard
Ensure that plugs are inserted fully into power outlets and are not
obstructed in any way. A poorly inserted plug may overheat, potentially
causing damage to the plug and outlet, and is a fire hazard
Electrical specifications
The steam generator is an electrical device. Before you use the steam generator, check there is
no damage to the plug, cable, and cable restraint.
Ensure your electrical circuit meets the following specifications for the steam generator:
 2750 W power circuit
 230 V, 50/60 Hz,
 The steam generator must be earthed
 The plug, cable, cable restraints and power outlet are not damaged.
 The plug and cable are clean and dry when you plug them into the power outlet.
 The plug can be inserted fully into the power outlet and is not obstructed in any way that
may cause a poor connection.
 We recommend you plug the steam generator into a power outlet that is protected with a
GFCI (Ground Fault Circuit Interrupter) circuit breaker.
Extension cables can be an electrical hazard
Ensure that the steamer generator is connected directly to the power
outlet. Do not use any type of extension cable to connect the steam
generator
Getting started
Unpacking your Haygain
®
hay steamer
Check you have all the following parts. If you do not have a part, contact your supplier within
7 working days of delivery.
 A Haygain
®
HG 600 hay chest, with a fixed 5-spike steam manifold

HAYGAIN HG 600 Hay Steamer Manual
6 © Haygain
 A Propress steam unit
 Steam hose with quick release fittings
 Funnel
 Watering can
 2 Haygain® descaler sachets
 User manual
Your Haygain® hay steamer details
Make a note of serial numbers and the date of delivery. The serial number for the hay chest is on
the inside of the lid. The serial number for the steam generator is on the label on the back.
Serial number (hay chest)
Serial number (steam generator)
Date of delivery

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 7
Hay chest
A Lid G Height-adjustable handle
B Lid seal H Internal hose
C Catch I Steam hole
D Drain hole J Manifold spike
E Steam manifold plate K Wheel
F Thermometer
E
A
B
F
J
I
C
G
H
K
D

HAYGAIN HG 600 Hay Steamer Manual
8 © Haygain
Steam generator
A Handle G Heating indicator light (amber)
B Safety cap H Empty indicator light (red)
C Filler spout I Polycarbonate insulated outer case
D Connector for hay chest J Stainless steel tank
E Steam hose K Copper-plated nickel heating element
F Power button L Power cable and cable restraint
I

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 9
Where to set up your Haygain
®
hay steamer
Set up your Haygain
®
hay steamer in a safe place
To prevent hazards and damage to your Haygain
®
hay steamer, use it in a
location that meets the specifications below. Keep the area around the hay
steamer clear from loose hay and other debris.
Keep children and animals safe
Keep children and animals away from your Haygain® hay steamer.
Take care when moving your Haygain
®
hay steamer
Do not carry or move the hay chest or steam generator when in use.
Before you move the hay chest or steam generator, switch off the steam
generator, empty the hay chest of hay, and ensure the steam generator
has cooled down.
To move the hay chest, lift it by the handles built into the chest.
To move a steam generator, lift it by the handle.
Set up your Haygain
®
hay steamer in a location that meets the following specifications:
Location Steam generator: indoors only
Hay chest: indoors or outdoors
Floor Level and hard floor that drains well
Clean and free from mold or damp
Ventilation Well ventilated, to avoid damp conditions
Nothing covering the hay chest or steam generator
Power Within 2 meters of a power outlet
Not directly under a power outlet, as steam can corrode the power outlet
Complies with the electrical specifications on page 5.
Water Near a source of clean tap water
Some water will come out of the drain holes in the hay chest. Ensure the water can flow to floor
drain if available, collect the water in a container or otherwise mop up the water on a regular
basis.
Do not store steamed hay next to un-steamed, dry hay to avoid risk of contamination of the
steamed hay. Keep the area around the hay steamer clear from loose hay.

HAYGAIN HG 600 Hay Steamer Manual
10 © Haygain
Connecting the steam generator to the hay chest
When the hay chest and steam generator are in a suitable location, use the steam hose to
connect them. Ensure the steam hose is not coiled, kinked or restricted when in use.
To connect the steam generator to the hay chest
1. Find the quick release fitting at the end of the steam hose.
2. Pull back the barrel of the quick release fitting on the hose and push it firmly onto the
hose connector on the hay chest.
3. Release the barrel of the quick release fitting on the hose, so that it slides into the
locked position.
4. To check that the steam hose is securely connected, pull the hose gently.

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 11
Using your Haygain
®
hay steamer
Read the safety chapter
Before you use your Haygain
®
hay steamer, read the Safety chapter on
page 4.
After you set up your Haygain
®
hay steamer and make sure it is safe, you can start steaming hay.
If you are working in freezing conditions, see page 15.
You can feed steamed hay to your horse immediately or ideally within 24 hours of steaming.
To steam hay, complete the following tasks in this chapter:
1. Fill the steam generator with water.
2. Load hay into the hay chest
3. Steam hay in the hay chest
4. Unload hay from the hay chest
Fill the steam generator with water
Warning: Do not open the cap on the steam generator when the steam
generator is hot. Ensure the steam generator has cooled down.
Do not stand over the steam generator when you unscrew the cap.
Do not pour cold water over a hot heating element.
Warning: Take care not to overfill the steam generator with water. Never
add anti-freeze or other additives to the water. Additives in the steam
generator can be a health hazard to your horse or can damage the steam
generator. It will also void the warranty.
Before you can start steaming hay, you need to fill the steam generator with water.
1. Unscrew the cap on the steam generator.
2. To ensure the steam generator is empty, hold it by the handle and tilt it. Empty the
water through the filler spout into a drain or container.

HAYGAIN HG 600 Hay Steamer Manual
12 © Haygain
3.
Place the funnel in the filler spout and carefully pour up to 8 liter of clean tap water into
the steam generator.
4. Remove the funnel from the steam generator, then screw on the cap and tighten it by
hand.
Load hay into the hay chest
Warning: Do not block the drain holes in the base of the hay chest.
Blocked drain holes may cause damage to the hay chest during the
steaming process.
The hay chest can hold up to 18 kilograms of loose forage, ½ to ¾ small haybale or three hay
nets.
After steaming, any metal parts on hay nets will be very hot. The hot temperatures in the hay
chest can also cause some hay nets to shrink. We recommend you use Haygain
®
hay nets, which
do not have any metal parts and are heat-resistant so they will not shrink. You can order Haygain
®
hay nets from www.equi-sales.dk.
1. Remove the lid from the hay chest.
2. Check there is no loose hay in the hay chest, and that the steam holes and drain holes
are not blocked. If there is any loose hay or blockages, clean the hay chest before you
load new hay. Read more about cleaning the hay chest on page 16.
3. Place the hay into the hay chest. Place the hay net or wedges of loose hay vertically, so
that they are parallel with the sides of the chest.
4. Press the hay down firmly, being careful of the manifold spikes. Ensure the manifold
spikes fully pierce the hay. Avoid overfilling the hay chest.
5. Replace the lid on the hay chest.

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 13
Steam hay in the hay chest
Do not allow the steam generator to run out of water
If a steam generator runs out of water, also known as “boils dry”, it can be
damaged. If the steam generator boils dry, switch off the steam generator
immediately. Before you unscrew the cap and add more water, allow it to
cool down. Do not stand over the steam generator when you unscrew the
cap. Do not pour cold water over a hot heating element.
Warning: Before you plug the steam generator into a power outlet, mop
up any water spillages around your Haygain
®
hay steamer. Ensure the
plug, cable, and power outlet are clean and dry.
When you steam the hay in the hay chest, the internal temperature of the hay chest can reach
80°C and above. This represents a temperature of 100°C in the hay. The combination of hot
temperature and moisture kills the mold spores and bacteria in the hay, protecting your horse
from harmful dust and microorganisms.
When you are steaming hay, some steam may be observed coming from around the hay chest lid.
This is normal and may be more obvious in low ambient temperatures. If no steam comes out of
the manifold spikes when you are steaming hay, there can be a blockage in the hay chest, steam
generator or steam hose. For more information, see page 19.
The power switch on the steam generator has the following positions:
 OFF
 ON
1. Plug the steam generator into a power outlet.
2. To switch on the steam generator, turn the power switch clockwise to the ON position.
The heating indicator light turns amber.
3. Steam the hay for at least 80 minutes then check the thermometer
on the hay chest lid.:
 If the temperature shown is at least 80°C, steaming is complete.
 If the temperature shown is below 80°C, continue steaming until
it is 80°C.
4. To switch off the steam generator, turn the power switch anti-clockwise to the OFF
position.
5. Unplug the steam generator from the power outlet.
6. When the steam generator has cooled down, unscrew the cap on the steam generator.
7. Hold the steam generator by the handle and tilt it. Empty the water through the filler
spout into a drain or container, to reduce the build-up of lime scale.

HAYGAIN HG 600 Hay Steamer Manual
14 © Haygain
Unload hay from the hay chest
Beware of hot steam when you open the hay chest lid
When you open the lid of the hay chest, stand to one side to allow steam
to escape. Do not lean over the hay chest as steam escapes.
Warning: If the hay in the hay chest is too hot, wear protective gloves
when you handle it. Take care when you unload hay nets, as any metal
parts will be very hot. Do not use sharp objects, for example hay forks,
inside the hay chest.
After you steam hay, the hay is warm and smells sweet. Most horses love the taste and prefer it to
dry or soaked hay. We recommend you make any changes to your horse's diet slowly, to give
their digestive system time to adapt. When you first start using steamed hay, mix it with your
horse's existing hay for a few days.
The steamed hay may be slightly wet on the outside due to condensation from the inside of the
hay chest lid, however, the inside of the hay will be dry to the touch.
To ensure the hay chest and its lid always fit together properly, keep the lid closed on the hay
chest as they cool down.
1. Lift off the lid of the hay chest to one side to allow steam to escape from the other side.
2. Unload the hay from the hay chest.
3. Replace the lid of the hay chest.

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 15
Working in freezing conditions
Do not use anti-freeze products
Do not use anti-freeze or other additives in the steam generator. Additives
in the steam generator can be a health hazard to your horse or can
damage the steam generator. It will also void the warranty.
Warning: Do not open the cap on the steam generator when the steam
generator is hot. Ensure the steam generator has cooled down.
Do not stand over the steam generator when you unscrew the cap.
Do not pour cold water over a hot element.
Hot steam and temperatures can cause burns
During steaming process, the steam hose will become hot. Take care
when you hold it.
When the ambient temperature is very low, water can freeze in the hay chest, steam generator or
steam hose. In colder ambient temperatures, it will take longer to bring the temperature up to the
level required for steaming. To reduce steaming time, you can fill a steam generator with hot
water before you switch it on. Please be patient in extraordinary cold circumstances. The horses
are the ultimate beneficiary.
1. Disconnect the steam hose connected to the hay chest:
a. Pull back the barrel of the quick release fitting on the hose.
b. Pull the quick release fitting off the connector on the hay chest.
2. To ensure there is no ice in the steam hose, fill the steam generator with water and then
switch on.
 If steam does not come out of the hose after 15 to 20 minutes, switch off the steam
generator and allow to cool for at least 5 minutes.
 To remove ice in a steam hose, place it in warm water and gently squeeze it.
 Switch on the steam generator again. If steam comes out of the steam hose,
continue to next step.
3. To ensure there is no ice in the hay chest, connect the steam hose to the hay chest and
switch on the steam generator. Do not load hay in the hay chest.
 If steam does not come out of the manifold spikes, switch off the steam generator.
 To remove ice in the hay chest, pour warm water over the hose, manifold and any
visible ice.
 Switch on the steam generator again. If steam comes out of the manifold spikes,
you can steam hay as normal.
4. After you use your Haygain
®
hay steamer, disconnect the steam hose from the hay
chest. To prevent ice from forming in the hay chest, tilt the hay chest backwards to allow
water to drain out of the steam manifold.

HAYGAIN HG 600 Hay Steamer Manual
16 © Haygain
Maintenance
To continue steaming hay and keeping your horse happy, please maintain your Haygain
®
hay
steamer. Complete the following tasks in this chapter:
 Daily: check that the drain holes are not blocked
 Weekly: clean the hay chest and clean the steam generator
 Regularly: descale the steam generator
Cleaning the hay chest
Warning: When you clean the hay chest, take care when cleaning around
the manifold as the spikes are sharp.
Check the drain holes in the base of the chest on a daily basis to ensure it is not blocked and
remove debris from underneath and in the hay chest.
Clean the hay chest every week. To clean the hay chest after steaming hay, switch off the steam
generator and wait at least 30 minutes for it to cool down.
1. Lift off the lid of the hay chest.
2. Remove all loose hay from inside the hay chest, including from the drain holes and
from under the steam manifolds.
3. To rinse the hay chest, use clean tap water. Allow the water to drain through the drain
holes at the bottom of the hay chest. Remove debris from underneath the hay chest.
4. Replace the lid of the hay chest.
Cleaning the steam generators
Warning: Do not open the cap on the steam generator when the steam
generator is hot. Ensure the steam generator has cooled down.
Do not stand over the steam generator when you unscrew the cap.
Do not pour cold water over a hot element.
Clean the steam generator every week. To clean a steam generator after steaming hay, switch it
off and wait at least 30 minutes for it to cool down.
1. Unplug the steam generator from the power outlet.
2. Disconnect the steam hose connected to the hay chest:
a. Pull back the barrel of the quick release fitting on the hose.
b. Pull the quick release fitting off the connector on the hay chest.
3. Empty the steam hose of water.

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 17
4. Unscrew the cap on the steam generator. Remove any debris from the cap.
5. Place the funnel in the filler spout and carefully pour in up to ½ liter of clean tap water
into the steam generator so that it is half full.
6. Remove the funnel from the steam generator, screw on the cap and tighten it by hand.
7. To remove any loose material in the steam generator, shake the steam generator.
8. Unscrew the cap on the steam generator and empty the water through the filler spout
into a drain or container.
9. Repeat steps 5 to 8 until the water is clear when it comes out of the steam generator.
10. Screw the cap onto the steam generator and tighten it by hand.
11. Reconnect the steam hose to the hay chest.
Descaling a steam generator
Label the steam generator when descaling
If you steam hay while the steam generator contains descaler, it can be a
health hazard to your horse. Clearly label the steam generator to say it
contains descaler to prevent other people from using it.
Warning: Only use food grade descaler to avoid any risk to your horse’s
health. Using a vinegar-based solution as a descaler is not advised
because it is not effective enough at removing limescale in the boiler and
can cause problems by only softening but not removing the limescale.
Limescale can build up in the steam generator. To prevent damage to the steam generator,
descale it on a regular basis. The frequency of descaling depends on how often you steam hay
and how hard your local water supply is. Please use the following guidelines:
Water Hardness
(Grains of CaCO
3
per Gallon)
Soft or
Moderately Soft
(0 - 5.8)
Slightly Hard or
Moderately Hard
(5.9 – 11.7)
Hard or
Very Hard
(over 11.7)
Less than one
steaming cycle
per day
12-14 weeks 8-10 weeks 4-6 weeks
One to two
steaming cycles
per day
8-10 weeks 4-6 weeks 2-3 weeks
Three or more
steaming cycles
per day
4-6 weeks 2-3 weeks 1-2 weeks
You can purchase descaler from www.equi-sales.dk.
1. Before you descale the steam generator, clean it. For more information, see page 16.

HAYGAIN HG 600 Hay Steamer Manual
18 © Haygain
After you clean the steam generator, do not screw on the cap or reconnect the steam
hose to the hay chest. Ensure the steam generator is completely empty.
2. Open the packet of descaler and dissolve it in the required volume of warm water, as
described in the manufacturer’s instructions.
3. Place the funnel in the filler spout and carefully pour the diluted solution of descaler
into the steam generator.
4. Remove the funnel from the steam generator, then screw on the cap and tighten it by
hand.
5. Switch on the steam generator.
6. When the water starts to boil and steam comes out of the steam hose, switch off the
steam generator.
7. Unplug the steam generator from the power outlet.
8. Clearly label the steam generator to say it contains descaler. Then allow the steam
generator to descale for at least 3 hours.
Tip: We recommend you descale the steam generator overnight.
9. To remove any loose material in the steam generator, shake the steam generator.
10. Unscrew the cap on the steam generator, then empty the water through the filler spout
into a drain or container.
11. Clean the steam generator until the water is clear when it comes out. For more
information, see page 16.
Storing your Haygain® hay steamer for long periods of time
If you will not use your Haygain® hay steamer for at least a week, follow the steps below to store it
correctly.
1. Disconnect the steam generator from the power outlet
2. Clean the hay chest and steam generator. For more information, see page 16.
If the steam generator will not be used for at least 4 weeks, descale it. For more
information, see page 17
3. Disconnect the steam hose from the hay chest. Empty the steam hose of water and
empty the steam generator of water.
4. Store the hay chest and steam generator in a sheltered and dry place, at above
freezing temperature. Store the steam generator with the power cable coiled up.
5. Before you use the hay chest and steam generator again, clean them thoroughly.
Ensure there is no damage to the plug or cable, and that they are both clean and dry.

HAYGAIN HG 600 Hay Steamer Manual
© Haygain 19
Support
If you have any problems with your Haygain® hay steamer, have a look at the following common
causes and solutions. Please ensure you have read and followed the maintenance guidelines on
page 16.
If the information below does not solve the problem, or you have any other questions please visit
www.equi-sales.dk.
If you need to arrange a service or order spare parts, please contact us.
Hay is taking longer than normal to steam
Possible cause Solution
The ambient temperature or water
temperature is lower than normal.
Steam the hay for longer than normal. Ensure the
thermometer on the hay chest reaches 80°C.
The heating element of a steam
generator is covered in lime scale.
Allow the steam generator to cool down.
Clean and descale the steam generator.
The amount of loaded hay is heavier
than normal or inconsistently packed
in the hay chest.
When loading hay, press it firmly and evenly into
the hay chest but do not overload the chest above
the top of the base. Ensure there is a gap between
the hay and the chest walls.
The power supply may be insufficient. Check the steam generator is connected to a
enough power supply. If you are unsure, contact a
qualified electrician.
Steam is not coming from all manifold spikes
Possible cause Solution
The hay chest is not on level ground. Allow your Haygain® hay steamer to cool down.
Move the hay chest to level ground.
There is a kink in the steam hose, or
it is damaged.
Allow your Haygain® hay steamer to cool down.
Replace the steam hose.
There is an unusual amount of water
in the steam manifold.
Allow your Haygain® hay steamer to cool down.
Disconnect the steam hose from the hay chest and
drain the water from the manifold by tilting the hay
chest backwards.
A section of the internal hose in the
hay chest or a manifold is blocked.
Contact us.

HAYGAIN HG 600 Hay Steamer Manual
20 © Haygain
Warranty
Your Haygain® hay steamer comes with a 1-year warranty. The warranty covers the repair and
replacement of your Haygain® hay steamer or a part of it. This includes all required parts and
labor. All repairs and replacements are at the discretion of Haygain®. For more information about
the warranty, contact us.
Terms of the warranty
 The warranty is effective from the date of delivery.
 Before Haygain® repair or replace your Haygain® hay steamer under warranty, you must
provide proof of purchase. Without proof of purchase, there will be a fee for the work
required.
 If your Haygain® hay steamer is faulty, it is usually repaired at an authorized service
center. All work is done by Haygain® or an authorized representative.
 Where possible, Haygain® can provide a steam generator on loan while your steam
generator is being repaired. There will be a fee for transportation. If you need a loan steam
generator, Haygain® may offer this as a replacement and will collect the faulty steam
generator. There will be no fee for a replacement steam generator.
 If a part for your Haygain® hay steamer is no longer available, Haygain® will replace it with
a similar functional part.
 Any repair, replacement or exchange of your Haygain® hay steamer under warranty does
not extend the warranty period.
Exceptions to the warranty
The warranty does not cover the following conditions:
 Normal wear and tear
 Accidental damage
 Removal of blockages
 Use of parts or accessories that are not approved by Haygain®
 Repairs and installations by parties that are not approved by Haygain®
 Faults or damage caused by not maintaining the hay chest or steam generator as
described in this user manual
 Faults or damage caused by negligent use or misuse, which includes but is not limited to
the following conditions:
o Using your Haygain® hay steamer in a location that does not meet the conditions
listed in this user manual
o Using dirty water in the steam generator
o Allowing the steam generator to run out of water
o Insufficiently descaling the steam generator
o Foreign objects in the steam generator or steam manifold