HD Electric PT-DVI User manual

Operating & nstruction Manual
PT-DVI
PROOF TESTER
®
VOLTAGE
INDICATOR TESTER
1475 Lakeside Drive • Waukegan, llinois 60085 U.S.A. • 847.473.4980
fax [phone] • website: www.HDElectricCompany.com

2
NTRODUCT ON
The PT-DV Proof Tester Voltage ndicator Tester is for use on the DV with any
available probes. This tester generates high voltage AC for testing the DV . To use,
turn on the DV , hold the Tester in one hand and the DV in the other. Apply the
DV probe to the metal end plate on the Tester. Press and hold the TEST button
on the Tester. A properly operating DV -500 will indicate a voltage of 0.2-0.5kV
depending on how the DV and Tester are held and a DV -100 will indicate
1.5-4.5kV. For best results, hold both units with a tight grip and wrap your
fingers around each unit. f the DV does not indicate voltage, do not use it
and return it to HD Electric Company for service.
CAUT ON
This Tester generates high voltage AC for testing DV AC voltage indicators.
There is no danger of electric shock when this tester is used as directed.
Discontinue use and return to HDE for service if the housing is cracked or
broken, or if the battery cover is lost.
CAUT ON: High Voltage
WARN NG:
Do not use this tester except as directed. Do not use to test equipment other
than specified DV Voltage ndicators. Do not apply to energized circuits or
equipment. Do not operate this Tester without the battery cover and do not
open the housing. Refer all servicing to the factory. Failure to follow these
instructions may lead to electric shock, severe injury or death.
OPERAT ONAL MPA RMENT
f the PT-DV is used in a manner not described in this instruction manual, the
protection and effective operation of this equipment may be impaired.
CARE AND MA NTENANCE
STORAGE - t is recommended for protection of the PT-DV that it is stored in
the DV carrying case.
PT-DVI
PROOF TESTER
®
VOLTAGE
INDICATOR TESTER

3
TECHN CAL SPEC F CAT ONS
D MENS ONS
4.9 in. L x 2.6 in. W x 1.3 in. H
(12.5 cm x6.6 cm x 3.3 cm)
WE GHT
0.44 lb (199 g)
BATTERY
9V alkaline ANS -1604A, EC 6LR61 or
9V lithium ANS -1604LC
OUTPUT VOLTAGE: 340VAC, 300Hz Nominal
capacitively coupled
ENV RONMENTAL COND T ONS
COND T ONS: ndoor and outdoor use
ALT TUDE: Up to 6,566 ft. (2000M)
OPERAT NG TEMPERATURE: -20°F to +140°F
(-29°C to +60°C)
HUM D TY: 95% to +60°C (non-condensing)
POLLUT ON DEGREE: PD2
ENCLOSURE MATER AL: ABS UL 94-HB
PR NTED C RCU T BOARDS: FR-4 UL 94-V0
BATTERY REPLACEMENT NSTRUCT ONS
To replace the battery, open the compartment on the bottom of the housing.
Remove and dispose of the old battery, replacing it with a fresh, new 9-volt
lithium or alkaline battery.
MANUFACTUR NG LOCAT ON
HD Electric Company • Waukegan, L. 60085, USA
CLEAN NG NSTRUCT ONS - To clean the PT-DV wipe with a damp cloth
with water. Do not use harsh chemicals or solvents.
DAMAGE - f you suspect any mechanical or electrical damage, do not use the
PT-DV and arrange for repair by returning to the factory.
CAL BRAT ON & TEST NG - Regular calibration is not required. There is no
calibration adjustment.
REPA RS - All repairs are performed at HD Electric Company. f any damage is found
please contact HD Electric Company at 847-473-4980 to arrange for service.

HD Electric Company is committed to ongoing review and improvement of its product lines,
and thus reserves the right to modify product design and specifications without notice.
HD Electric Company® products are available through HDE® sales representatives worldwide.
Printed in U.S.A. © HD Electric Company 2016 • Bulletin No. PT-DV M-100b
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This warranty applies to all products sold by HD Electric Company (the "Products"); provided, however, that the term Products does not include any
third party products purchased through HD Electric Company, for which no warranties are made (the "Third Party Products"). Third Party Products
may be subject to a separate manufacturer's warranty; [should you have any question regarding whether a separate warranty applies, please contact
HD Electric Company].
NOT CE: READ TH S L M TAT ON OF WARRANTY AND L AB L TY BEFORE BUY NG OR US NG THE PRODUCTS CONTA NED HERE N.
t is impossible to eliminate all risks associated with the use of the Products. Risks of serious injury or death, including risks associated with electrocution,
arcing and thermal burns, are inherent in work in and around energized electrical systems. Such risks arise from the wide variety of electrical systems
and equipment to which Products may be applied, the manner of use or application, weather and environmental conditions or other unknown factors,
all of which are beyond the control of HD Electric Company.
HD Electric Company does not agree to be an insurer of these risks, and shall have no liability for any claims arising from such risks.
WHEN YOU BUY OR USE THESE PRODUCTS, YOU AGREE TO ACCEPT THESE R SKS.
HD Electric Company warrants to the original purchaser that the Products (excluding any third party products purchased through HD Electric Company,
for which no warranties are made) will be free from defects in material and workmanship, under normal use and regular service, and preventative
maintenance for a period of one (1) year (ten (10) years for HDE Capacitor Controls) from the date of shipment (the “Warranty Period”). Should any failure
to conform with this warranty be found during the Warranty Period, you must notify HD Electric Company of your claim within thirty (30) days of discovery,
and within the Warranty Period. Your failure to give notice of claims of breach of warranty within the Warranty Period shall be deemed an absolute and
unconditional waiver of claims for such defects. HD Electric Company will have no responsibility to honor claims received after the date the applicable
Warranty Period expires.
Upon notice of your claim, HD Electric Company will provide a return authorization number, and further instructions on how to return the product for
service. You must follow HD Electric Company’s instruction. You are responsible for all Product removal, handling, re-installation, and shipping (both
to and from HD Electric Company). Products returned for repair, as well as repaired or replacement Products shall be sent postage / freight prepaid. After
receipt of a product which HD Electric Company determines is defective, HD Electric will, at its option, either (1) repair (or authorize the repair of) the
Product or (2) replace the Product, subject to the following: The Products are made using parts sourced from a variety of manufacturers. Due to the rapidly
changing technology environment, parts may become obsolete / unavailable over time (end of life). n the event that a Product cannot be repaired or
replaced due to unavailability of parts, HD Electric Company will use commercially reasonable efforts to obtain substitute parts or conduct work around
design, but cannot guarantee its ability to do so.
tems not found defective will be returned at your expense, or failing receipt of instruction from you on return of such items within five (5) business days
of our notice to you that the product is not defective, HD Electric may dispose of the product at its discretion and with no liability to you. HD Electric
Company’s determination of defects is final. Products repaired or replaced during the Warranty Period shall be covered by the foregoing warranties for
the remainder of the original Warranty Period or ninety (90) days from the date of delivery of the repaired or replaced Products, whichever is longer.
LIMITATIONS:
This warranty is void in the event of misuse, alteration, faulty installation, or misapplication of the product.
This warranty does not cover failure of product or components due to any ACT OF NATURE; lightning, floods, hurricanes, tornadoes or any other such
catastrophic events.
HD Electric Company does not warrant any third party products or associated hardware or their performance or suitability for use and application. Such
items are provided “as-is”.
All repairs must be authorized by HD Electric Company. Unauthorized repairs will not be reimbursed under any circumstances.
HD Electric Company is not required to make replacement or loaner equipment available while Products are being repaired or replaced, or to compensate
you for any in/out labor charges or expenses associated with removal, handling or re-installation of the Products.
TO THE MAX MUM EXTENT PERM TTED BY LAW, TH S WARRANTY AND THE REMED ES SET FORTH ABOVE ARE EXCLUS VE AND N L EU OF ALL OTHER
WARRANT ES, REMED ES AND COND T ONS, WHETHER ORAL OR WR TTEN, EXPRESS OR MPL ED. HD ELECTR C EXPRESSLY D SCLA MS ALL OTHER
WARRANT ES OF ANY K ND, EXPRESS OR MPL ED, NCLUD NG W THOUT L M TAT ON MPL ED WARRANT ES OF F TNESS FOR A PART CULAR PURPOSE,
MERCHANTAB L TY AND NON- NFR NGEMENT.
N NO EVENT SHALL HD ELECTR C COMPANY BE L ABLE FOR ANY ND RECT, NC DENTAL, CONSEQUENT AL OR SPEC AL DAMAGES RESULT NG FROM THE
USE OR HANDL NG OF THESE PRODUCTS. TH S SHALL NCLUDE BUT, NOT L M TED TO, LOST PROF TS OR REVENUE, LOSS OF USE OF THE PRODUCTS,
COST OF SUBST TUTE PRODUCTS, FAC L T ES OR SERV CES, OR DOWNT ME.
N NO EVENT SHALL HD ELECTR C COMPANY HAVE ANY L AB L TY FOR ANY TH RD PARTY PRODUCTS OR ASSOC ATED HARDWARE, OR
CUSTOMER-OWNED SYSTEMS, EQU PMENT OR SOFTWARE.
HD Electric Company must have prompt notice of any claim so that an immediate product inspection and investigation can be made. Buyer and all
users shall promptly notify HD Electric Company of any claims, whether based on contract, negligence, strict liability, or other tort or otherwise be barred
from any remedy.