HDWAVE K1401 User manual

ETHERNET SERIES
1
K1401 Ethernet Over Coaxial Master/Receiver Power by PoE Switch
FEATURES:
No PC required, plug & play and reducing the cables and power distribution cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over coaxial or UTP cable
PoE powered or Inject DC56V power over an existing coaxial or UTP cable to PoE IP camera.
Up to 600 meter over RG-6, 400 meter over Cat5E transmission distance
Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
SPECIFICATIONS:
MODEL
K1401
Extender Interface
Connector Type
1x BNC
Cable Type
75-ohm RG59, RG6 cable
Max. Transmission Distance
600m (2000ft.) RG6 DC56V
400m (1300ft.) RG6 PoE+
Ethernet Interface
Connector Type
1x RJ-45 with LEDs on Connector
Cable Type
Straight through or cross-over Cat5 Cable, Auto
MDI/MDIX
Rate
IEEE 802.3x, Auto-Detection for 10/100Base-T
and full/half duplex
Input Voltage
IEEE 802.3at (PoE+) PD@ RJ45 Port
Control & Indicators

ETHERNET SERIES
2
Color LED
Coaxial Data Signal Strength
Green：GOOD (Link speed > 60 Mbps)
Amber：MEDIUM (Link speed 20~60Mbps)
Red：BAD (Link speed < 20Mbps)
OFF：NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing(1) (Join or Leave Network Group(2))
Push
Duration
LED
Status
Description
1 –3 sec
Red Blink
Join/Host Network
Group(3)
5 –8 sec
Amber Blink
Once -> OFF
Leave Network Group(4)
10 –15 sec
OFF ->
Amber Blink
Once
Reset to Default
Network Group
Power
Input Operating Voltage
DC 56V / 0.03 –1.6A @DC JACK
IEEE 802.3at (PoE+) DC54V / 0.61A
Power Consumption
3W
(w/o power forwarding)
Mechanical & Environmental
Weight
176g (6.2 oz)
Dimensions (W × L × H)
38 x120 x 33mm (1.5”x4.7”x1.3”)
Operation Temperature
-20C ~ +60°C (-4°F ~ 140°F)
Storage Temperature
-30C ~ 80C (-22°F ~ 176°F)
Humidity
20% to 85% RH. (non-condensing)
◆Transmission Distance with Power Delivered:
K1401 via Coax
Power Delivered
Power Source
Not using
PoE output
5.5W
7W
9W
12W
17W
Maximum Coax RG6. Data Link Distance
DC56V Power Supplied
2000m
600m
500m
400m
300m
200m
802.3at PoE+ DC54V Power Supplied
2000m
400m
350m
250m
200m
100m
802.3af PoE DC48V Power Supplied
2000m
180m
150m-
100m-
-
-

ETHERNET SERIES
3
K1401 via UTP
Power Delivered
Power Source
Not using
PoE output
16W
18W
19.5W
20W
22W
Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance
DC56V Power Supplied
600m
600m
500m
400m
300m
200m
802.3at PoE+ DC54V Power Supplied
600m
500m
400m
350m
250m
200m
Power Delivered
Power Source
Not using
PoE output
6W
8W
9W
10W
11W
802.3af PoE DC48V Power Supplied
600m
400m
300m
200m
150m
100m
◆CONNECTION DIAGRAM:
Notice: The distance many not match below specification due to the different
cable quality, camera bandwidth and supply power noise.
EA-EOC101PTK ETHERNET OVER COAX
◆Application Diagram 1: Single Camera EoC with PoE Transmission System
PoE+ Power Supplied
◆Application Diagram 2: Single Camera EoC with PoE Transmission System
External DC56V Power Supplied
Master
Master
Transceiver
Transceiver

ETHERNET SERIES
4
K1401 ETHERNET OVER UTP
◆Application Diagram 1: Single Camera EoU with PoE Transmission System
PoE+ Power Supplied
◆Application Diagram 2: Single Camera EoU with PoE Transmission System
External DC56V Power Supplied
VER:2018/9/10
Master
Master
Transceiver
Transceiver