Health Care Logistics 1431 User manual

Instructions for the
Single-Sided Bin Rack (HCL #1431)
Call Free 1 800 848 1633 or 888 HCL INTL (425 4685) • Fax Free 1 800 447 2923
International Call 740 477 1686 • International Fax [phone] • Web site http://www.hcl-intl.com • E-mail: [email protected]
Before assembling your Bin
Rack, please familiarize yourself
with all the parts, and check to
make sure that you have all the
parts as listed below.
A - (2) Vertical Bars
B - (12) Horizontal Bars
C - (2) Leg Stands
D - (2) Braces
E - (1) Bag of Mounting Hardware
1. Take one of the two vertical
bars and attach a horizontal
bar to the first hole from the
bottom using the included
screws. There will be a
screw on both sides of the
vertical bar. The open end
of the vertical bar should
face in and the open end of
the horizontal bar should
face up.
Open End
Open End Up
Open End
2. Now attach the remaining
vertical bar onto the hor-
izontal bar using screws.
Tighten down the screws.
The open end should
face inward as well.

Instructions for the
Single-Sided Bin Rack (HCL #1431)
Call Free 1 800 848 1633 or 888 HCL INTL (425 4685) • Fax Free 1 800 447 2923
International Call 740 477 1686 • International Fax [phone] • Web site http://www.hcl-intl.com • E-mail: [email protected]
3. Skipping two holes on the
vertical bar, attach another
horizontal bar with the
open end up. Attach the
rest of the horizontal bars,
skipping every other hole
using the included screws.
4. Take one of the two
leg stands and slide it
over the vertical bar.
Place two bolts
through the holes in
the stand to attach
the stand to the verti-
cal bar. Finish attach-
ing the leg stand by
removing the screw in
the second horizontal
bar and then inserting
it so that is goes
through the hole in
the leg stand.
Place screw here
Bolts go
through
the stand
and verti-
cal bars.
Open End
Leg Stand

Instructions for the
Single-Sided Bin Rack (HCL #1431)
Call Free 1 800 848 1633 or 888 HCL INTL (425 4685) • Fax Free 1 800 447 2923
International Call 740 477 1686 • International Fax [phone] • Web site http://www.hcl-intl.com • E-mail: [email protected]
5. After attaching the second
base unit onto the rack, attach
both braces. The braces
attach from the bottom of the
vertical bars to the center
holes in the first horizontal
bar. The brackets are bolted
and then tightened with the
included hardware.
Congratulations you have
now finished assembling
your Bin Rack.
Attach to the
holes in the
vertical bars
Place the bolts
through the
holes