Health Care Logistics Kango Vinyl Seat Stool User manual

2. A. If your stool has a footrest, slide
the footrest onto the bottom of center
column and position it at the desired
level. The footrest position can be
adjusted later when the user is sitting
on the stool. B. Tighten the footrest
with the adjustable knob (turn
clockwise) when in the desired position.
Instructions for Kango®Vinyl, Polyurethane,
& Wood Seat Stools
Call Free 1 800 848 1633 or 888 HCL INTL®(425 4685) • Fax Free 1 800 447 2923
International Call 740 477 1686 • International Fax [phone] • eb Site http://www.hcl-intl.com • E-mail: [e-mail]
1. When you receive your stool it should include
the following: 1 five leg base, 1 center column,
1 seat, and 1 optional footrest on items #8426,
11690, and 11696.
3A. Insert the larger end of the center
column into the 5-leg base.
Kango®is a registered trademark of Biens Company. REV.121902
five leg base
center column
footrest
seat
Models with
footrest. Models without
footrest.
3B. Push the center
column into the base
until it stops.
1
2A
2B
3A
3B

4. Slide the peg on the underside of the
seat onto the top of the center
column. Push the seat down until it
latches onto the column.
5. The stool is now assembled and the
height can be adjusted for the user or
workstation by the seat height lever on
the side of the seat.
lever to
adjust seat
height
Instructions for Kango®Vinyl, Polyurethane,
& Wood Seat Stools
Call Free 1 800 848 1633 or 888 HCL INTL®(425 4685) • Fax Free 1 800 447 2923
International Call 740 477 1686 • International Fax [phone] • eb Site http://www.hcl-intl.com • E-mail: [e-mail]
4 5