
Call Free 1.800.848.1633 • Fax Free 1.800.447.2923
© Health Care Logistics, Inc. 2012
ASSEMBLY INSTRUCTIONS FOR
Grip ‘N’ Crush Crusher (#18793)
1
Step 1. Place the blister label side down on the
countertop.
2
3 4
Step 2. Align the Grip ‘N’ Crush parallel with the
long side of the tablet. This prevents the tablet from
popping out from under the crusher. Push straight
down to crack the tablet.
Step 3. If you encounter a stubborn tablet, place one
hand on top of the crusher and press straight down. Step 4. Rock back and forth until the tablets are
crushed to the desired consistency.
5 6
Step 5. To crush multiple uncoated tablets at once,
place inside a 4 or 6-mil Reclosable Bag then close to
prevent dispersion of the tablet powder and keep the
area clean.
Step 6. Push straight down to crack the tablets.
Parallel to the long
side of the tablet