Hearth & Hand TGT-CT05 User manual

Hearth & Hand
round coffee table
assembly instructions
Style # TGT-CT05
DPCI # 324-07-6007

Congratulations on your latest purchase
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck-though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (1-855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

hardware
H1 - hex bolt x 8
( M6 x 50mm )
H2 - hex bolt x 1
( M6 x 40 mm )
H3 - hex wrench x 1
( L4 x 114 mm )
H4 - lock washer x 9
( M6 x 1.5 mm )
H5 - flat washer x 9
( M6 x 1 mm )
.............................................................................................................................................................................................................................

exploded diagram
ITEM
DESCRIPTION QTY
A top table 1
B leg inside 1
C leg outside 1
.............................................................................................................................................................................................................................
A
C
B

steps 1: attach outside leg to top table
1.1 attach inside leg (B) to outside leg (C).
.............................................................................................................................................................................................................................

step 2 : attach inside leg to top table
H1 - hex bolt x 8
( M6 x 50mm )
H4 - lock washer x 8
( M6 x 1.5 mm )
H5 - flat washer x 8
( M6 x 1 mm )
H3 - hex wrench x 1
( L4 x 114 mm )
2.1 attached both of leg (B & C) to top table
1.1 inserting lock washer, flat washer to the bolts and insert them to pre-drilled hole then tighten with hex wrench.
.............................................................................................................................................................................................................................
.............................................................................................................................................................................................................................
H3
H1
H4
H5

step 3 : attach inside leg to top table
H2 - hex bolt x 1
( M6 x 40 mm )
H4 - lock washer x 1
( M6 x 1.5 mm )
H5 - flat washer x 1
( M6 x 1 mm )
H3 - hex wrench x 1
( L4 x 114 mm )
1.1 inserting lock washer, flat washer, and bolts to the stretcher then tighten with hex wrench.
................................................................................................................................
.............................................................................................................................................................................................................................
H3
H2
H4
H5
.............................................................................................