Seville Classics SHE18308B User manual

Customer Service Informaon
Seville Classics Inc.
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Website: www.sevilleclassics.com
05312022
FAQs
Q. Where can I purchase wheels for the work table?
A. Wheels can be purchased at www.sevilleclassics.com.
Search for model no. SHE18308WH.
Q. Where can I purhcase an extra wire shelf for the work table?
A. Extra shelves can be purchased at www.sevilleclassics.com.
Search for model no. SHE18308SH.
Q. Can I place a counter top dishwasher on top of the work table?
A. Yes. The work table can hold up to 1,000 lbs (evenly distributed) total, across the
stainless steel top and lower wire shelves. The lower wire shelves can hold up to 500
lbs. each (evenly distributed).
Q. Can I use the work table in a restaurant?
A. Yes, our stainless-steel worktable is certified by the NSF to NSF/ANSI Standard 2 -
Food Equipment for use in dry environments.
Safety
Do not tip the table over or place upside down.
Do not place more than 1,000 lbs. on the table top.
Specifications
Dimensions: 49" W x 24" D x 35.5" H
Weight Capacity: 1,000 lbs. (evenly distributed)
Net Weight: 45 lbs.
Model: SHE18308B
Thank you for choosing Seville Classics! We hope that you enjoy your new
stainless-steel table. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and contact informaon.
05312022
Commercial-Grade NSF
Stainless-Steel Top Work Table

Parts List
A. S.S. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to
[email protected]
1
B. Wire Shelf (1)
C. Slip-Sleeves (16 )
D. Poles (4)
E. Leveling Feet (4)
2
Assembly Instrucons
STEP 1.
Fit caps over the booms of
LEVELING FEET (E), and
screw into the base of
POLES (D).
STEP. 2
Clip SLIP-SLEEVES (C)
around bottom grooves.
IMPORTANT: Count up
from boom grooves to
make sure all slip sleeves
are at the same height.
Fit WIRE SHELF (B) over slip
sleeves and press down
rmly.
STEP 3.
Clip SLIP-SLEEVES (C)
around top grooves on
each pole.
Fit S.S. TOP (A) over slip
sleeves and press down
firmly.
CONGRATULATIONS!
Enjoy your new stainless-
steel worktable!