Heatmaster Oak Ridge Creek 24” User manual

FOR BEST RESULTS WE RECOMMEND THAT YOU PLACE YOUR GLOWING EMBERS ON THE BURNER BE-
FORE SETTING UP YOUR LOG SET. SEE THE INSTRUCTION MANUAL THAT WAS SUPPLIED WITH THE
BURNER HEARTH KIT.
Oak Ridge Creek 24”
Step 1. Place back log H-1054. Then place front log H-1053
Step 2. Place log H-01033 & H-1055
H-1054
H-1033 H-1055
H-1053
Step 3. Place log H-1031
H-1031
3/22/2011

H-0852
H-1057
H-1035
H-1056
Step 5. Place log H-1035.Place lower front logs H-1056 & H-1057 as
shown below. Place pine cone ( A-380) in front of the controls.
A-0380
Oak Ridge Creek 24”
Step 4. Place log H-0852

H-1054
H-0852
H-1055
H-1053
A-0380
H-1031
H-1033
Oak Ridge Creek 24”
H-1035
H-1056
H-1057
3/22/2011

FOR BEST RESULTS WE RECOMMEND THAT YOU PLACE YOUR GLOWING
EMBERS ON THE BURNER BEFORE SETTING UP YOUR LOG SET. SEE THE
INSTRUCTION MANUAL THAT WAS SUPPLIED WITH THE BURNER
HEARTH KIT.
Oak Ridge Creek 30”
Step 1. Place back log H-1034. Then place front log H-1027
Step 2. Place log H-01033 & H-1030
H-1034
H-1027
H-1030
H-1033
3/22/2011

Step 3. Place log H-1032 & H-1031
H-1032 H-1031
H-1029
H-1035
H-1028
Step 4. Place log H-1035.Place logs H-1028 & H-1029 as shown
below. Place pine cone (A-0380) in front of the controls.
A-0380
Oak Ridge Creek 30”

H-1034
H-1029
H-1028
H-1030
H-1027
H-1035
H-1032
A-0380
H-1031
H-1033
Oak Ridge Creek 30”
3/22/2011