Heatmaster Millennium 8000 Series User manual

8
Settings
Change between °C and °F
The thermostat temperature display can be set to °C or
°F. The default is °C.
With the thermostat off, press the following sequence
of buttons: ‘P’, ‘T’, ‘T’ again, ‘MODE’.
Restore factory default settings
With the thermostat off, press the following sequence
of buttons: P’, T’, T’ again, .
Teaching RF thermostat ID code to control unit
CAUTION: The thermostat has already been
programmed with a unique code. Do not attempt to
teach the RF Thermostat ID code unless instructed by
the manufacturer.
With the thermostat off, press the following sequence
of buttons: ‘P’, ‘T’, ‘T’ again, .
The LCD display will show CL’ (Code Learn) for 2
seconds then return to the normal OFF state display.
During this time a special code will be transmitted by
the RF Thermostat to the Control Unit, causing the
Control Unit to learn its ID.
1
Millennium 8000 Series
Thermostat

2
uick Start Guide
On/Off
Press and release the button. If the thermostat is off,
pressing and releasing will turn the thermostat on to
the most recently selected working mode.
Setting the day of the week and time
With the thermostat off, press and hold the T’ button
for 2 seconds or longer to initiate programming the
time. Time, the hour setting and AM/PM will flash.
Setting the hour function
Press and release the  or  button to increase
or decrease the hour setting by 1 hour.
Setting the minute function
Press and release, or press and hold the  or 
button to increase or decrease the minute setting
by 1 minute similarly to the hour setting.
Press OK’ to accept and select the day of the
week.
Setting the day of the week function
7
The temperature setting will now flash. Press
and release the  or  button to increase
or decrease the temperature setting by 1 °C.
Press and hold the  or  button for 2
seconds or longer to increase or decrease
the temperature setting by 1°C every 0.5
seconds.
To accept the temperature press OK’.
Period 1 is now set for the day/s of the week that you
have chosen. The LCD will display to indicate that
Period 2 can now be set for the same day/s of the week.
Repeat the programming process for periods 3 and 4.
After program 4 is set, press 'OK' and the program for
the selected day/s will be set.
The thermostat will now automatically turn off.
Repeat the programming process for any other
periods/days that are required.

6
MO  TU  WE  TH  FR  MO TU WE
TH FR  SA  SU  SU SA  MO TU WE
TH FR SA SU
To accept the selected day/s of the week
press OK’.
Setting the period starting time
The hour and AM/PM settings will now flash.
To set the P1 starting time, press and release
the  or  N’ button to increase or
decrease the hour setting. Press and hold
the  or  button for 2 seconds or longer
to increase or decrease the hour setting by 1
hour every 0.5 seconds.
The hour function is in 12 hour time, so
please ensure that AM/PM is set correctly.
To accept the hour press OK’.
The minute setting will now flash. Adjust the
minute setting similarly, using  or 
button
To accept the minute press OK’.
Setting the temperature
3
Press and release the  or  button to change
the day of the week to the following or previous
day. Press and hold the  or  button for 2
seconds or longer to increase or decrease the day
of the week by 1 day every 0.5 seconds.
Press OK’ to complete setting.
The time and day of the week is now set.
Manual mode
The manual mode allows setting the temperature at any
level.
Manual mode does not require that the time and day of
the week are set.
Flame height and fan speed
The flame height and fan speed are not manually
adjustable. The flame height and fan speed are set
by the thermostat according to the difference
between the set temperature and the current
temperature.
Automatic mode
The automatic mode allows the temperature to be
regulated according to a programmed level and time.

4
Manually overriding the set program
At any time, the temperature or fan speed may be
adjusted up or down similarly to operating in
manual mode. However, whenever the thermostat
changes to a new time period, the temperature
will be set automatically according to that period’s
setting.
Programming
Each day of the week can be programmed individually
for 4 periods P1, P2, P3 and P4, making a total of 28
programmed periods.
Alternatively, a weekday program can be set, so the
same program is used for Monday-Friday. Similarly, a
weekend program can be set for Saturday-Sunday. The
entire week can also have the same program.
Alternatively, a weekday or weekend program can be
set with individual programs for the remaining days.
The suggested period settings for each day/s are:
Period 1 - morning
Period 2 - daytime
Period 3 - evening
5
Period 4 - night-time
To begin programming
With the thermostat off, press and hold the P’
button for 2 seconds or longer to initiate
programming. The LCD will display ,
and the time at which the thermostat is currently
set. will flash.
Period 1 can now be set.
Setting the day of the week
You must choose which day/s of the week
you wish to program.
Press and release the  or  button to
change the day of the week to the following
or previous day. Press and hold the  or 
button for 2 seconds or longer to increase or
decrease the day of the week by 1 day every
0.5 seconds.
The order that you can scroll through the
days is as follows: