Heckler Design WindFall FRONT MOUNT User manual

Assembly & Installation
H517
WindFall®
FRONT MOUNT
Secure Enclosure for iPad mini for Room Scheduling
Limited Warranty
Heckler Design warrants your product to be free from defect in material and
workmanship for a period of two years from the original date of purchase.
Electronic components are warranted to be free from defect for a period of one
year from the original date of purchase. If you discover a defect, please contact
[email protected]. Heckler Design will repair, at our discretion, using
new or refurbished components. If repair is not possible, Heckler Design will
replace the item.
Compatible with:
iPad mini 1
iPad mini 2
iPad mini 3
iPad mini 4

2
Phillips Head
Screwdriver
Drill Marker
M3 Hex Key
1x
F486
F529
2x
E250
4x
Foam for iPad Fit
Adapter Clip
Thread-Forming
Mounting Screw
Keep your special assembly tool in a safe place. To purchase a
replacement, please contact [email protected].
(#17 drill bit or 5/32-inch drill bit)

1
2
3
Disassemble Front Mount
Remove Mounting Bracket From
Front Bezel

Mark Hole Positions3
4
4
Please select the mounting positions that work best
for your mullion.
Drill Mounting Holes
You may use any screw you see fit for mounting the
product to the mullion.
If you choose to use the self-tapping mounting
screws provided, we recommend drilling a pilot hole
with a #17 drill bit or a 5/32-inch drill bit.

Ethernet Cable Hole
5
If your Ethernet cable has an RJ45 connec-
tor installed, drill a 5/8 inch hole in the
position shown.
If you will install an RJ45 connector after the
Ethernet cable is drawn through the mullion,
a smaller hole can be created.
2x
F486
Form Mounting Hole Threads
iPad mini 2
iPad mini 3
iPad mini 4
The mounting screws provided are thread-forming
screws.
5

6
7
2x
F486
Remove Mounting Screws
Faster Mounting Bracket to mullion
6

Adapter Clips For iPad Mini 4
4x
E250
iPad mini 4
7

8Charging Options
Gigabit + PoE Adapter Battery Bank
PoE Splitter (Power Only) PoE Splitter (With wired data connection)
1. Apple Lighting to USB 3 Camera
Adapter
2. Apple USB Ethernet Adapter
2
1
8

9
10
Install Tablet
Install Front Bezel
9

F529
11
12
4x
Slide Front Bezel Onto Mounting Bracket
Tighten Assembly Screws
10