Heckler Design H489 User manual

H489 R03
Assembly & Installation
tinyurl.com/HecklerAVCart
Watch Assembly Video
Limited Warranty
Heckler AV
Heckler Design warrants your product hardware to be free from defects in material and workmanship
throughout the life of the product, and electronic components for a period of one year from the original
date of purchase. If you discover a defect in a product covered by this warranty, we will repair at our
option using new or refurbished components, or if repair is not possible, replace the item. We reserve the
right to request order numbers, receipts, and other supplemental order information as proof of purchase
to validate warranty claims.

F515
4x
1:1
Vertical Arm & Rear Leg
Assembly Screw (2 3/4 inch)
8x
1x
1x
Multi Shelf Installation Screw
F522
3/8” Inch Hex Key-AV Cart
F516
8x
Zip Tie Anchor Installation Screw
F533
F523
5mm Hex Key-MultiShelf Installation Tool
2
Keep your special assembly tool in a safe place. To purchase
a replacement, please contact [email protected].

F521
4x
1:1
M6 TV Set Screw
M8 Display Mounting Hardware
F589
Zip Tie Mount - Leg
F532
Zip Tie Mount - Vertical Arm
F531
Zip Tie
F530
4x
4x
8x
8x
3

VESA 400 hole pattern display required
MAX display size: 75 inches
MAX load weight: 250 pounds
Two-Person assembly
Do not overtighten display mounting screws
F562
2x
Front Braking Casters (not to scale)
F563
Rear Non - Braking Casters (not to scale)
2x
Phillips Head Screwdriver
4

2x
F515
F516
5
1 Unpack large parts onto soft surface
2 Assemble legs to base
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

3 Pop the wheels out of casters
4 Install casters
2x
F562
2x
F563
2x
F562
2x
F563
6

5 Pop the wheels back
6 Assemble vertical arms to base
2x
F515
F516
7
Do not tighten
arm assembly screws.

8

7 Install Multi Shelves
8x
F522
F523
9

8 Tighten the arm assembly screws
8x
F522
F523
10

M6 Display Mounting Hardware
9 Select correct display-mounting screws
OR
M8 M6
1. Transfer rubber spacers from
the M8 set screws.
2. Slide rubber spacers on to the
M6 set screws.
11

11 Install display mounting hardware
12

8 Install display to vertical arms
4x
13

9 Install zip tie mounts in legs
and vertical arms
8x
4x
F533
F532
8x
F531
14

10 Place Zip Ties
8x
F530
1. Transfer rubber spacers from
the M8 set screws.
2. Slide rubber spacers on to the
M6 set screws.
15

11 Route cables
16