hegen PCTO All-Rounder Cup User manual

Hegen PCTO™ All-Rounder Cup
Instructions for Use
Phthalate-Free
and PVC-Free

Inspect all items before each use. Throw away at the first sign of damage or weakness. The bottle and accompanying parts
may blur after repeat use, wash, warming and sterilising. For safety and hygiene reasons, we recommend replacing
components every 6 months.
For more information on our products, please visit www.hegen.com
2a
InsertInsert
2b
click!
Twist
clockwise
to lock
5b
Twist anti
clockwise
to open
4
Turn left
to lock
Press to
close
Twist right
and lift up
to open
1
Place seal securely
on the underside
of the crown collar
3
Press
POP!
5a
Do not peel
from top
To
disassemble
push out the
silicone disc
Part
Dust Cover / Crown Collar
Silicone Disc / Seal
Material
Polypropylene (PP)
Silicone
Heat Resistance
-20°C to 110°C
PPSU Disc / Container Polyphenylsulfone
(PPSU) -20°C to 180°C
Crown Collar
Seal
Container
PPSU Disc
Silicone Disc
Dust Cover
For your child’s safety and health
WARNING!
Always use this product with adult supervision. •Continuous and prolonged sucking of fluids will cause tooth decay. •Always
check temperature before feeding. •Keep all components not in use out of the reach of children. •Before first use, clean
the product. •Inspect before each use. Throw away at the first signs of damage or weakness. •Before first use place in
boiling water for 5 minutes. This is to ensure hygiene. •Clean before each use. •Dishwasher safe (top rack only) – Food
colouring, milk or oil residue that undergo heating processes may stain or discolour parts permanently. •Do not warm
contents in a microwave as this may cause uneven heating and could scald when drinking. •Do not use in a heated oven or
microwave. Always stir heated food to ensure even heat distribution and test the temperature before the serving. •This is
not a toy. •Do not allow child to play with small parts or walk/run while using bottles or cups. •Never attach to cords,
ribbons, laces or loose parts of clothing. The child may be strangled. •Do not use abrasive cleaning agents or solvents as
these may cause damage. •Do not place components directly on surfaces that have been cleaned with anti-bacterial
cleaners. •Plastic materials may be affected by high temperatures and sterilising. This can affect the fitting and aesthetics
of the product. •Proper assembly is necessary to ensure a leak free seal.

Cleaning:
Always wash your hands with soap before cleaning, sterilising and feeding. •Before first use, dissemble all parts of the
product, wash with bottle detergent and rinse in clean water thoroughly before sterilising. This is to ensure hygiene. Always
take all components apart and wash the product with bottle detergent immediately after each use. •When using a
dishwasher (top rack only), avoid high-heat settings like “sanitary clean” or “heat boost” which may distort components.
•Do not use chemically aggressive or abrasive cleaning agents, solvents or anti-bacterial cleaners as these can damage the
product. •Cleaning the product with a wired bottle brush may cause scratches. •Remember to clean all sides as well as the
base and covers of the bottles.
Sterilising:
Suitable for sterilising by steam (electric), boiling water or cold water tablet/ or sterilisation, all components should be
completely taken apart to avoid different reactions of materials which can cause deformation. All grease or oil residue
should be thoroughly removed before sterilising to avoid permanent staining of parts. Chemical sterlisation or the use of
hand cream and/or sun cream may cause the print to fade.
Assembly:
Proper assembly is required for better spill resistance. 1) Place removable seal securely on the underside of the crown collar
to ensure air tight storage. 2a) Insert PPSU disc to top of crown collar. 2b) Twist clockwise to lock, ensure click sound is
observed. 3) Affix silicone disc to top of crown collar, push down to ensure silicone knob is firmly fastened to PPSU disc.
4) Press-to-close the crown collar and turn clockwise to lock. Twist-to-open the crown collar in an anti-clockwise direction.
5a) To disassemble, push out silicone disc from underside of PPSU disc, do not peel from top. 5b) To remove PPSU disc from
crown collar, twist anti-clockwise to unlock and push out.
Usage:
Press lips on silicone disc to sip. •Straw can be inserted in the centre of crown collar for easy drinking.
Art 500
Copyright © Hegen
Hegen retains all intellectual property rights to this product and packaging. Including all designs, graphic images and text.
Any reproduction of materials is strictly prohibited and constitutes infringement.
All Rights Reserved.
Patent Pending
Hegen Pte Ltd
438A Alexandra Road
Block A Alexandra Technopark
Unit #02-01 Singapore 119967