heightec TowerPack WK34 User manual

The heightec Group Ltd, Lake District Business Park, Mint Bridge Road, Kendal, Cumbria, LA9 6NH, UK
User Instructions
REF: UI WK32 Issued: 07/04/2011 Revised: 05/12/2014 Approved: CED
Anchor sling
Powerlock device
Tail rope
Rescuer connection
Casualty connection
Shears
WK33/WK34 - TowerPackTM Rescue system
This equipment should only be used by competent persons, who have been trained in the use of this specic kit.
These user instructions are to be read in conjunction with the individual user instructions for each specic item of equipment,
which are included in the kit.
Only connect to suitable attachment points on the rescuers and casualties harnesses.

The heightec Group Ltd, Lake District Business Park, Mint Bridge Road, Kendal, Cumbria, LA9 6NH, UK
WK33/WK34 - TowerPackTM Rescue system
REF: UI WK32 Issued: 07/04/2011 Revised: 05/12/2014 Approved: CED
User Instructions
Inspect before and after every use. In
addition a detailed inspection should be
carried out by a competent person at
intervals no greater than twelve months.
Casualty
connection
Tail rope
Anchor sling.
Secure above
decent path
Lowering a casualty

WK33/WK34 - TowerPackTM Rescue system
The heightec Group Ltd, Lake District Business Park, Mint Bridge Road, Kendal, Cumbria, LA9 6NH, UK
REF: AI WK32 Issued: 22/02/2018 Revised: 26/04/2019 Approved: CED
Disclaimer: It is the users responsibility to assemble the kit correctly referring to individual product user instructions.
Kit Assembly Instructions
Assembly
1. Feed rope into bag.
2. Thread Powerlock on to rope following diagram marked on device or pictures in le. Device should be approx 30cm from
end of terminated end.
3. Put CSP10 screwlink on device.
4. Attach the SAS030M knife strop to the CSP10. Put MSK2 in pouch and attach cord.
5. Hand tighten screwlink in closed position.
6. Clip CKA2 into screwlink. Clip other CKA2 to end of knife strop.
7. Captivate CKS3C on to the terminated end of rope.
8. Attach S25N120P sling to CKS3C ensuring stitched end is on krab. Note: Ensure the stitched end of the S25N120P is
connected to the CKS3C.
9. Secondary person checks.
10. Add all user instructions and prompt sheet x 2 security tags.
11. Attach security tag to outer bag.
CODE DESCRIPTION
A030M Wire sling, 30cm
B30 Kari Transport bag
CKA2 Altus karabiner
CKS3 Astra karabiner
CSP10 Screwlink pear 10mm
D321 Powerlock rescue descender
MSK2 Rescue shears with cord and pouch
RS110G Tectra 11mm rope - 50m (WK33)
RS110G Tectra 11mm rope - 100m (WK34)
S25N120P Sling, nylon
Kit contents