HeimVision HM203 User manual

HD Smart WiFi Camera
HM203
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

3
WHAT’S INCLUDED
Smart Wifi Camera Camera Mount Camera Mount
Power Adapter USB Cable LAN Cable
Screw Set User Manual
PRODUCT OVERVIEW
LENS
IR LED
Reset
Microphone
Night Vision
Memory Card Slot

4
Note:
Please move the built-in sphere of the camera up to see the reset button and memory
card slot.
CONNECT THE CAMERA TO MOBILE DEVICE
App Downloading and Installation
Search for HeimLink from App Store™/Google Play™, or scan the QR codes below to
download and install the App into your mobile device.
For IOS For Android
Speaker
LAN Port
Power Input

5
Note:
Google Play™ is a trademark of Google Inc., and App Store™ is a trademark of Apple Inc.
Account Registration and Login
Please register an account with a valid email address, then log in.
Connect the Camera to HeimLink Account
IMPORTANT:
•This camera only supports 2.4GHz Wifi networks.
•For a stable network connection, please make sure the camera and the mobile
device are close to the router.
•Avoid using special characters or symbols in your Wifi name and password, such as
@~!#$%^&* and so on.
•For all connecting options, you will hear the voice prompts after the camera is
powered on. Press and hold the Reset button for 5~6s to reset the camera if no
voice prompts heard. You will hear “Reset success“ at a successful reset.
•Please turn on the location service and Wifi on your mobile device, then allow
HeimLink App to access your location and use Wifi.

6
Connect the camera by scanning QR code
Power on the camera, wait until you hear “Please configure camera by AP hotspot or
scanning code“.
1. Tap in the center or upper right corner.
2. Select Intelligent camera.
3. Select Scan code to add.
4. Tap Next.
5. Connect to your router’s Wifi and tap Next.

7
Tip:
Tap to check your Wifi status.

8
6. Align the QR code on your mobile device with the camera lens and keep a distance of
4-8 inches. Tap “When you hear a beep or a green light” after you hear two beeps
from the camera.
7. Wait for the connection.
8. Name your camera and tap Start to experience to finish the connection.
Connect the camera by AP hotspot
Power on the camera, wait until you hear “Please configure camera by AP hotspot or
scanning code”.
Notes:
•Please enable Location Services on your mobile device and allow HeimLink to access
your location.
•No password is required for the wifi HeimLink_AP_xxxx. If your mobile device
prompts you that the Wifi is unsecure, please ignore it.
1. Tap in the center or upper right corner.
2. Select Intelligent camera.
3. Select Addition of AP hotspot.
4. Tap Next.
5. Tap Go to Setting.
6. Connect to the Wifi HeimLink_AP_xxxx.

9

10
7. Go back to the interface of network configuration.
8. Tap Next.
9. Select your router’s Wifi and enter the correct password.
10. Wait for the connection.
11. Name your camera and tap Start to experience to finish the connection.

11
Tip:
There will be a pop-up window of connection instruction if you didn’t connect to the Wifi
HeimLink_AP_xxxx successfully. Tap Confirm and connect to the Wifi again.
Connect the camera through LAN cable
Connect your camera to a router with a LAN cable. Power on the camera, wait until you
hear the voice prompts “Please wait for wired connection. Please wait for Internet
connecting. Please choose wired connection to add camera”.
1. Tap in the center or upper right corner.
2. Select Intelligent camera.
3. Select Addition by connecting to network cable.
4. Tap Next.
5. Scan the QR code on the camera.

12
6. Wait for the connection.
7. Name your camera and tap Start to experience to finish the connection.

13
Tip:
After the camera is connected to the App with the LAN Cable, you can switch to Wifi
connection for flexible placement and operation of the camera. Go to Settings, select
Network information and input the correct password. After successfully connecting to
the selected Wifi, the camera will reboot automatically.
FUNCTION OVERVIEW
Home Page
After the camera is connected to HeimLink app successfully, it will be listed on the home
page.
Device:
: subscribe to or renew a cloud plan.
: turn on/off the camera.
: share the camera with your family.

14
: enter the notification settings page.
: enter the settings page.
Cloud event:
Only available when a cloud plan is subscribed to. Tap to check the videos recorded on
the cloud when motion/sound/human outlines detected. Tap on a video to play it, then
tap Save to save it to the Cloud album as needed.
Cloud service:
•Check your device’s cloud service.
•Change the cloud plan to a new camera.
Mine:
•Check coupons.
•Check videos/pictures saved in My Album.
•Find a connection guide if your device is able to work with Alexa.
•Get help and give us feedback.
•Know more details about the app.

15
Live Video
Tap the thumbnail on the home page to watch the live video.
1. Back to the home page.
2. Detailed Settings.
3. Real-time bit rate of the live video.
4. Change the resolution of the image; SD is recommended for smoother streaming.
5. Turn on/off the live audio from the camera.
6. Tap to capture a photo and save it to local album.
7. Tap and hold to talk with people near the camera.
8. Tap to start recording the live video; tap again to end and save it to local album.
9. Full screen.
10. The thumbnails of the latest videos stored in cloud if you have subscribed to cloud
service.
11. Tap to bring up a menu:
: turn on/off the camera.
: restore the camera angle to its initial state

16
: create a preset, and the camera will directly rotate to the preset location if you
tap the thumbnail.
: share your camera with your family.
: enter the notification settings page.
: slide it to pan/tilt the camera.
Tap the area outside the menu to exit.
12. Enter the Cloud Album.
13. Tap to playback the videos recorded in the cloud or memory card.
Video Recording
Notes:
•Two recording options are available for the camera: recording videos to a
memory card or cloud.
•If you have both installed a memory card and subscribed to a cloud plan, the
videos will be recorded in the memory card and cloud at the same time.
•The camera loops to record videos, which means the latest videos will overwrite
the oldest one when the card is full.
•The camera’s card slot is not hot-swappable. Please reboot your camera after
installing the card.
By a memory card
Install a memory card (up to 128GB), then go to Settings > Memory card management >
Format the SD card to format your card before the first use.
Then select a recording mode from Not recording, Alarm recording and Continuous
recording.

17
Alarm recording means the camera will record videos only when sound/motion/human
outlines are detected. Continuous recording means the camera will continuously record
videos 24 hours a day.
By cloud
Go to home page > or Cloud Service to subscribe to a cloud plan. The cloud plan
also includes Alarm recording and Continuous recording, please select it as required.
Tip:
If you have got an activation code, you can tap Pay by activation code and enter the code
to activate the cloud plan.

18
Video Playback
Tap on the Live Video to watch the recorded videos in cloud/memory card.
1. Back to the home page.
2. Detailed Settings.
3. Only available for playing videos from cloud. Tap to play the video at x1.0, x2.0,
x4.0 or x0.5 speed.
4. Turn on/off the live audio from the camera.
5. Tap to capture a photo and save it to local album.
6. Tap to start recording the live video; tap again to end and save it to local album.
7. Full screen.
8. Calendar.
9. Switch between cloud and memory card.
10. Timeline:
Slide leftward or rightward on the timeline to play the videos. Pinch and spread,
or double tap on the timeline to enlarge or narrow it.
When you play the recorded videos from cloud, the timeline will show two colors:
deep blue (motion/sound/human outlines detected) and light blue (nothing
detected).
11. Enter the Cloud Album.
12. Only available for videos from cloud. Slide the arrow on the yellow frame to
adjust the video length you cut, and tap to save the video to the cloud album.
13. Switch to Live Video.

19
PTZ Function and Preset
Pan & Tilt & Zoom Function
Tap on the Live Video, then slide to pan/tilt the camera. Spread/pinch or double
tap on the live video to zoom in/zoom out the live image.
Preset
Pan/tilt the camera to the direction you would like to focus, then tap to create a
preset.
1. Create a preset.
Tap +to create a preset, name it and tap Save.
2. Call a preset.
Tap the thumbnail and the camera will directly rotate to the preset location.
3. Delete a preset.
Tap Edit, then tap to delete the preset.

20
Alarms and Notifications
The camera will record videos to the cloud or memory card only when
motion/sound/human outlines detected if you subscribe to a cloud plan of Alarm
recording or select Alarm recording for your memory card.
Apart from recording videos, the camera can also give out Alarm Tone and send push
notifications when motion/sound/human outlines are detected.
Alarm Settings
1. Adjust detection sensitivity
Go to Settings > Alarm Settings > Detection sensitivity to set the sensitivity level.
Medium is the default setting. Please set it to Low to reduce false alarms if you don’t
want to be disturbed frequently.
2. Select detection area
Go to Settings > Alarm Settings > Detection area to start setting. Tap on the preview
image to select the detection areas. Detection areas selected are those parts with
blue frames.
Tap Finish to complete the setup.
This function aims to reduce false alarms and decrease the frequency of being
disturbed. All areas are selected by default.