Heinner HWM-M7012HA+++ User manual

Cititi cu atentie manualul inainte de a utiliza aparatul
AUTOMATIC WASHING MACHINE
Model: HWM-M7012HA+++
Model: HG-150SS
www.heinner.ro
Automatic washing machine
Loading capacity: 7 kg
Spin: 1200rpm

www.heinner.com
1
Thank you for purchasing this product!
I. INTRODUCTION
Before using the appliance, please read carefully this instruction manual and keep it for future reference.
This instruction manual is designed to provide you with all required instructions related to the installation,
use and maintenance of the appliance.
In order to operate the unit correctly and safety, please read this instruction manual carefully before
installation and usage.
II. YOUR PACKAGE CONTENT
II.
III.
Washing machine
User manual
Warranty card

www.heinner.com
2
III. SAFETY MEASURES
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
- The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be
reused.
- This washing machine is for indoor use only.
- The openings must not be obstructed by a carpet.
- (This warning is only for EUROPEAN market). This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the appliance in a
safeway and underst and the hazards involved. Children shall not play with the appliance.Cleaning and
user maintenance shall not be made by children without supervision.
- (This warning is not for EUROPEAN market). This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance.
- Pull out its plug from the power socket before cleaning or maintenance.
- Make sure that all pockets are emptied.
- Sharp and rigid items such as coin, brooch, nail, screw or stone etc.may cause serious damages to this
machine.
- Pull out its plug and cut off water supply after the operation.
- Please check whether the water inside the drum has been drained before opening its door. Please do
not open the door if there is any water visible.
- Pets and kids may climb into the machine. Check the machine before every operation.
- Glass door may be very hot during the operation.Keep kids and pets far away from the machine
during the operation.
- Take care that power voltage and frequency shall be identical to those of washing machine.
- Do not use any socket with rated current less than that of washing machine.Never pull out power plug
with wet hand.
- To ensure your safety, power cord plug must be inserted into an earthed three-pole socket. Check
carefully and make surethat your socket is properly and reliably earthed.
- Children of less than 3 years should be kept away unless continously supervised.
- Kids should be supervised to ensure that they do not play with the machine.
- Packing materials may be dangerous to the kids. Please keep all packing materials (plastic bags, foams
etc) far away from the kids.
- Be careful of burning when washing machine drains hot washing water.

www.heinner.com
3
- Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with
explosive or caustic gases.
- Make sure that the water and electrical devices must be connected by a qualified technician in
accordance with the manufacturer's instructions and local safety regulations.
- Before operating this machine,all packages and transport bolts must be removed.Otherwise,the
washing machine may be seriously damaged while washing the clothes.
- Before washing the clothes at first time, the washing machine shall be operated in one round of the
whole procedures without the clothes inside.
- The washing machine with single inlet valve only can be connected to the cold water supply. The
washing machine with double inlet valves can be connected to the hot water and cold water supply.
- Your washing machine is only for home use and is only designed for the textiles suitable for machine
washing.
- Flammable and explosive or toxic solvents are forbidden.Gasoline and alcohol etc.Shall not be used
as detergents.Please only select the detergents suitable for machine washing, especially for drum.
- It is forbidden to wash carpets.
- Never refill the water by hand during washing.
- After the program is completed, please wait for two minutes to open the door.
- Please remember to disconnect water and power supply immediately after the clothes are washed.
- Do not climb up and sit on top cover of the machine.
- Do not lean against machine door.
- Please do not close the door with excessive forces. If it is found difficult to close the door,please
check if the excessive clothes are put in or distributed well.
- The household washing machine isn't intended to be built-in.
- Cautions during handling machine
1. Transport bolts shall be reinstalled to the machine by a specialized person.
2. The accumulated water shall be drained out of the machine.
3. Handle the machine carefully. Never hold each protruded part on the machine while lifting.
Machine door can not be used as the handle during the conveyance.

www.heinner.com
4
IV. PRODUCT DESCRIPTION

www.heinner.com
5
V. UNPACKING THE PRODUCT
IV.
Unpack your washing machine and check if there is any damage during the transportation. Also make sure that
all the items in the attached bag are received. If there is any damage to the washing machine during the
transportation, or any item is missing, please contact the local dealer immediately. Dispose the packing materials
The packing materials of this machine may be dangerous to kids. Please dispose them properly and avoid easy
touch by kids. Please dispose the related packing materials according to the relevant local regulations. Please do
no throw the packing materials away together with the other daily living rubbishes.
VI. INSTALLING
REMOVE TRANSPORT BOLTS
Before using this washing machine, transport bolts must be removed from the backside of this machine.
Please take the following steps to remove the bolts:
1. Loosen all bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
SELECT THE LOCATION
Before installing the washing machine, the location characterized as follows shall be selected:
- Rigid, dry, and level surface (if not level, please make it level with reference to the following figure
“Adjust Leg”)
- Avoid direct sunlight
- Sufficient ventilation
- Room temperature is above 0 C
- Keep far away from the heat resources such as coal or gas.
Make sure that the washing machine will not stand on power cord.
Do not install the washing machine on the carpet floor.

www.heinner.com
6
ADJUST LEG
1. When positioning the washing machine, please first check if the legs are closely attached to the
cabinet. If not, please turn them to their original positions with hand or spanner and tighten the nuts
with spanner.
2. After positioning the washing machine, press four corners on top cover of washing machine in
sequence. If the washing machine is not stable when being pressed, this leg shall be adjusted.
3. Ensure the positioning status of washing machine. Loosen the lock nut with spanner and turn the leg
with hand until it closely contacts with the floor. Press the leg with one hand and fasten the nut closely
to the cabinet with the other hand.
4. After being locked properly, press four corners again to make sure that they has been adjusted
properly. If it is still unstable, it has to repeat Steps 2 and 3.
5. Put a solid cylinder (e.g. pop cans) oppositely on the top cover of the washing machine from in the
left, right, front and back directions. If the cylinder keeps stable, the washing machine is positioned
level. If it rolls, the washing machineis positioned unlevel. The rolling direction is the direction of lower
ground surface.Then, the two legs in this direction shall be raised at the same time until the washing
machine is level. Steps 1~3 are repeated to make the bottom legs closely against the ground and the
nuts shall be locked tightly.
CONNECT INLET PIPE
Connect the inlet pipe as indicated in the figure. For the model which has hot valve, please connect the
hot vale to hot water tap. Energy will decrease automatically for some program.
INSTALL INLET PIPE
1. Connect the elbow to tap and fasten it clockwise.
2. Connect the other end of inlet pipe to the inlet valve at the backside of washing machine and fasten
the pipe tightly clockwise.
Notes: after connection, if there is any leakage with hose, then repeat the steps to connect inlet pipe.
The most common type of tap shall be used to supply water. If tap is square or too big, then standard
tap shall be changed.

www.heinner.com
7
PLACE OUTLET HOSE
There are two ways to place the end of outlet hose:
1. Put it beside the water trough.
2. Connect it to the branch drain pipe of the trough.
Position outlet hose properly so that the floor will not be damaged by water leakage.
Notes: If the machine has outlet hose support, please install it like the following pictures.
- When installing outlet hose, fix it properly with a rope.
- Position outlet hose properly so that the floor will not be damaged by water leakage.
- If outlet hose is too long, do not force it into washing machine as it will cause abnormal noises.
ELECTRICAL CONNECTION
- As the maximum current through the unit is 10A when you are using its heating function, please
make sure the power supply system (current, power voltage and wire) at your home can meet the
normal loading requirements of the electrical appliances.
- Please connect the power to a socket which is correctly installed and properly earthed.
- Make sure the power voltage at your place is same to that in the machine's rating label.
- Power plug must match the socket and cabinet must be properly and effectively earthed.
- Do not use multi-purpose plug or socket as extension cord.
- Do not connect and pull out plug with wet hand.

www.heinner.com
8
CHECKLIST AND PREPARATION BEFORE WASHING CLOTHES
Please read this operation method carefully to avoid the troubles of washing machine and damages of
clothes.
Check if the first-washed clothes will bed decolorized.
After a white towel touched with liquid detergent is used to wash the invisible corners of the clothes,
check if the white towel is stained with clothes' original color.
As for the scarves and those clothes that easily get decolorized among imported clothes, please wash
them separately before washing.
As for the stains on sleeves, collars and pockets, use the liquid detergent and wash it with brush gently.
Finally put them into the washing machine to achieve more ideal washing effects.
As for temperature-sensitive clothes, they shall be washed as required in the labels. Otherwise, it may
cause color change or distortion.
Keep in Mind:
Never put the clothes to be washed in washing machine for a long period of time.
Otherwise it may get moldy and cause spots. Therefore, please wash the clothes in time.
The clothes also may get color changed or distorted if they are not washed according to the stated
washing temperature.
- When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do not pull power cord
forcibly.
- If power cord is damaged or has any sign of being broken, special power cord must be selected or purchased
from its manufacturer or service center for replacement.
WARNING!
1. This machine must be earthed properly. If there is any short circuit, earthing can reduce the danger of
electrical shock.
This machine is equipped with power cord, which includes plug, earthing wire at earthing terminal.
2. Washing machine shall be operated in a circuit separate from other electrical appliances. Otherwise,
power protector may be tripped or fuse may be burned out.
VII. USING INSTRUCTIONS

www.heinner.com
9
Clothes that can not be washed by washing machine
The clothes that may get distorted if being immersed in water: ties, waistcoats, western-style
clothes, outer garments etc. may have obvious shrinkage if being immersed in water; the
decolorized clothes such as blended spinning clothes of artificial fiber etc.
Wrinkle-style clothes, embossed clothes, resin clothes etc. may get distorted when being immersed
in water. Among cotton and wool materials, the clothes that get easily distorted are wrinkle-style
silk, fur products and fur decorations;
Clothes with decoration, long dress and traditional clothes etc are the products to get decolorized
easily.
Please do not wash the clothes without material labels and washing requirements.
Never wash the clothes stained with the chemicals such as gasoline, petroleum, benzene, paint
thinner and alcohol.
Please pay attention with regard to detergents
“Low bubble” detergent or washing powder or washing powder special for drum washing machine
shall be selected according to fiber types (cotton, synthetic fiber, soft products and wool products),
colors, washing temperatures, dirty degrees and types. Otherwise, excessive bubbles may be
generated and overflowed out of the drawer so that accidents may take place.
Bleacher belongs to alkali type and can damage clothes, so it is suggested to use as little as possible.
Powder detergents can easily leave the residues in the clothes so as to generate the bad smell, so
they shall be sufficiently rinsed.
Detergent can not easily get dissolved completely if there is too much detergent or water
temperature is rather low. It can remain in clothes, pipes and washing machines to pollute the
clothes.
Washing shall follow the weight of clothes, dirty degrees, local water hardness as well as the
recommendations from the detergent manufacturers. Please consult the water company if you are
not clear of water hardness.
Notes: Keep detergents and additives in safe and dry places out of touch by kids.
CHECKLIST AND PREPARATION BEFORE WASHING CLOTHES
Please take out the items out of the pockets.
Please check the pockets of the clothes to be washed, empty the rigid items such as decorations and
coins, otherwise washing machine may be damaged or have abnormal troubles.
For the clothes to be washed, they are classified according to the following characteristics:
The symbol types of care labels: the clothes to be washed are classified into cotton, blended fiber,
synthetic fiber, silk, wool and artificial fiber.

www.heinner.com
10
Color: white and colorful colors shall be identified. All new colorful articles shall be washed in a
separate way.
Size: the articles of different sizes are washed together to increase the washing effects.
Sensitivity: soft articles shall be washed separately. As for new pure wool textiles, curtains and silks,
the soft washing procedure shall be selected. Check the labels in all washing articles.
The clothes shall be sorted before being put into washing machine. As for the curtains with hooks,
the hooks shall be removed before being washed.
The decorations on the clothes may damage the washing machine. As for the clothes with buttons
or embroideries, they shall be turned over before being washed.
Clean up fasteners:
Zips shall be zipped close and buttons or hooks shall be fixed. The loose band or ribbon shall be
bound together.
It is suggested to put bras into the pillow slip with zip or buttons sealed to prevent the steel
wire from popping out of bras into the drum and damaging the machine.
Especially delicate textiles such as laced curtains, straight jackets, small articles (tight socks,
handkerchiefs, ties etc.) shall be put into string bag for washing. When washing a single big and
heavy dress such as Turkish towels, jeans, wadded jackets etc., it may easily cause great eccentricity
and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to
be washed together so that draining can be done smoothly.
Clean away dusts, stains and pet hairs from the clothes.
The clothes may be damaged and disturb washing effects during the friction between dusts, stains
and clothes.
To protect baby skin
Baby articles (baby clothes and towels) including napkins shall be washed separately. If they are
washed together with the adults' clothes, they may be infected. Rinsing times shall be increased to
ensure the thorough rinsing and cleaning without the detergent residues.
It is suggested that the parts that are easily stained such as white sockets, collars and sleeves etc.
shall be hand washed before being put into washing machine to achieve more ideal washing
effects.
Please use powder or liquid detergents. The residues of the soap could remain in the gaps of the
clothes if soap is used.
Confirm the washing capacity:
Do not put excessive washings; otherwise it may affect the washing effects. Please confirm
the maximum affordable washing quantity according to the following table.
Fiber type
Maximum loading capacity
Cotton
7.0 kg
Synthetic
3.5 kg
Wool
2.0 kg
Delicate
2.5 kg

www.heinner.com
11
The clothes which easily get fuzzed shall be turned over for washing
The clothes which easily get fuzzed shall be washed separately; otherwise the other articles can be
stained with dust and thrum etc. Preferably, black clothes and cotton clothes shall be washed
separately because they can easily get stained with the thrums of other colors when being washed
together. Please check before washing.
Washing machine shall not wash water-proof materials (ski suits, outside napkin pads,
curtains).
As for the fiber products that water can not get soaked easily into such as water-proof cushions,
and clothes, it is better not to wash. Otherwise there will be water bursting aut or abnormal
vibration to cause danger while rinsing and draining so that the clothes also may be damaged.
(Such as outside napkin pads, raincoats, umbrella, ski suits, car covers, sleeping sacks etc.)
Cautions during Draining
Draining of normal clothes: Moistures of washings are drained through drain hole.
Draining of water-proof clothes and fiber products: In the normal washing and draining status,
moistures of water-proof clothes and fiber products can not be drained while washing water is
gathered in one direction so that the eccentricity of washing machine is too great and vibration or
moving is caused.
QUICK START

www.heinner.com
12
Notes:
1.The Control panel line chart is for reference only, Please refer to real product as standard.
2.The Control panel could be changed without written notice. Please visit the website of Washing Machine
or call up the service line for consultation.
3.When the lights of Speed (400,600,800,1000,1200) are off means the speed is 0.

www.heinner.com
13
WASHING CLOTHES AT FIRST TIME
Before washing clothes at first time, the washing machine shall be operated in ne round of the
whole procedures without clothes in as follows:
1.Connect power source and water.
2.Put a little detergent into the box and close it.
3.Press the button “On/Off”.
4.Press the button “Start/Pause”.
The drawer is separated as follows:
I: Pre-detergent or washing powder.
II: Main detergent, softener, pre-dip, bleaching or decontaminating products.
: Washing additive, such as fabric softener or tackifier.
PUT DETERGENT INTO WASHING MACHINE.
1.Pull out the drawer.
2.Fill pre-detergent into Case I (when necessary).
3.Fill detergent into Case II.
option1: detergent (powder) . option2(liquid)
4.Fill softener into Case (when necessary).
Notes:
- As for the agglomerated or ropy detergent or additive, before they are poured into the detergent
box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being
blocked and overflowing while filling water.
- Please choose suitable type of detergent for the various washing temperature to get the best
washing effect with less water and energy consumption.
START UP WASHING MACHINE
Connect the power. Check if water pipes are connected properly. Open the tap completely. Put in
the clothes to be washed and fill in the detergent and tackifier. Then press the button
“On/Off”,Select the proper procedures and functions and press the button “Start/Pause”.

www.heinner.com
14
SELECT THE PROCEDURE
The proper washing procedures shall be selected according to the types, quantities, and dirtiness
of the clothes to be washed in combination with the following washing temperature table.
90⁰C
Seriously besmirched, pure white cotton or flax (for example: coffee table
cloths, canteen table cloths, towels, bed sheets)
60⁰C
Moderately besmirched, colorful flax, cotton and synthetic articles with
certain decolorizing degree (for example: shirts, night pajamas; Slightly
besmirched, pure white flax (for example: underwear)
40⁰C, 30⁰C, 20⁰C
Cold water
Normally besmirched articles (for example:synthetic and wool)
First, turn the rotary switch to select the corresponding procedures according to the types of
textiles.
Second, select the proper temperature according to the dirtiness. Generally, the higher the
temperature is, the more the power is consumed.
Last, select the proper revolution speed. The higher the revolution speed is, the drier the textiles
are spun, but higher the noises will also be increased.
The surfaces of delicate textiles will have wrinkles and the working life of washing machine will be
shortened.
PLEASE NOTE: to protect the clothes, the lower revolution speed shall be selected for delicate
textiles. The main washing procedures depend on the types of the clothes to be washed. The main
washing troubles can be selected as follows:
- Cotton
You can select this procedure to wash the daily washable clothes. The washing period is quite long
with quite strong washing intensions. It is recommended to wash the daily cotton articles, for
example: bed sheets, quilt covers, pillowcases, gowns, underwear etc.
- Cotton ECO
To increase the washing effects, main additional washing time is increased.
It is recommended to wash the clothes for babies or worn by the persons with allergic skin.
- Synthetic
You can select this procedure to wash the quite delicate clothes. The procedure is shorter
compared with that for cottons and the washing intension is quite gentle. It is recommended to
wash synthetic articles, for example: shirts, coats, blending. As for curtains and laced textiles, the
procedure “Synthetic ” shall be selected. While washing the knitting textiles, detergent quantity
shall be reduced due to its loose string construction and easily forming bubbles.
- Delicate
You can select this procedure to wash your delicate clothes. Its washing intension is gentler
and revolution speed is less compared with the procedure “Synthetic”. It is recommended
for the articles to be washed softly.
- Wool
You can select this procedure to wash the wool textiles labeled with “Machine Wash”. Please
select the proper washing temperature according to the label on the articles to be washed.
Furthermore, the proper detergent shall be selected for wool textiles.

www.heinner.com
15
- Baby Care
You can select this procedure to wash your baby’s clothes,it can make the baby's wear cleaner and
make the rinse performance better to protect the baby skin.
- Colors
You can choose the program washing brightly colored clothing, it can protect the bright colors
better .
- Underwear
Underwear cycle which is specially made for washing underwears is more demanding on rinsing
strength and will operate one more time than other cycles.
- Quick wash
This procedure is suitable for washing few and not very dirty clothes quickly.
- Spin Only
Separate Spin Procedure. Soap water or rinse water shall be drained out before spinning.
- Rinse&Spin
Separate Rinse&Spin Procedure.
- Drain Only
Separate Drain only Procedure.
- Mix
You can select this procedure wash the tough clothes, that need much more time and strength. It is
used for the daily clothes fo cotton, such as sheets, chained, pillowcases bathrobe and underwear.
- Sport Wear
You can select this procedure to wash the activewear.
- Jeans
This program is specially designed for washing jeans.
- Hand Wash
As for few light dirty clothes, the default temperature of washing is cold.
- My Cycle
Press Spin 3sec. for my cycle to memory the procedure. The default my cycle is cotton. The main
function can be selected as follows:
- Prewash
The Prewash function can get an extra wash before main wash.
- Speed Wash
The function can decrease the washing time.
- Extra Rinse
The laundry will undergo extra rinse once after you select it.
- Delay
Delay function can be set with this button, the delaying time is 0-24H.
Set the delay function:
1.Select a programme;
2.Press the Delay button to choose the time;
3.Press Start/Pause to commence the Delay operation.

www.heinner.com
16
Cancel the Delay function: Press the Delay button until the display will be 0H.It should be pressed
before starting the program. If the program already started, should press the On/Off button.
Notes: If there is any break in the power supply while the machine is operating, a special memory
stores the selected programme and when the power is restarted, press the Start/Pause button the
left time is continues.
- Reload
This operation can be executed during the washing procedure. When the drum of the washing
machine is still rolling and there is large amount of water with high temperature in the drum. The
state is unsafe and the door cannot be opened forcefully. To press 《Start/Pause》for 3 sec. to
reload, and start the clothes adding in the midway function .
Please follow the steps as bellow:
1.Wait until the drum stops rotation.
2.The door lock is unlocked.
3.Close the door when the clothes needs are loaded and repress the《Start/Pause》button.
- Child Lock
To avoid that the washing procedure cannot operate normally due to the mis operation by kids
during the washing procedure, you can select this function, In this case, the other buttons except
On/Off button can not work, at this state ,the machine power off when press the key on/off. The
machine remembers the program child lock and the program during powered off when press the
key on/off again.
Press Extra Rinse and Pre Wash together 3 seconds during the running procedure, the buzzer will
beep ,Start/Pause button as well as the rotary switch are locked. Press the two buttons for 3
seconds together and buzzer will beep to release to locking. But cut off the power supply , the
kid’s protection is also release to locking. The kid’s protection will not be cancelled after all
procedures are completed.
- Suppression of the acoustic signals
This is an additional buzzer function on your appliance. After deactivating the buzzer function, the
buzzer will be closed.
After starting the machine, press the “Temp.&Spin” button for 3 seconds and you will hear a beep,
then the buzzer will be closed. To restart the buzzer function, press the “Temp.&Spin” button
again for 3 seconds. The setting will be kept until the next reset.
Warning: After deactivating the buzzer function, the sounds will not be activated any more.
- Bubble Removal Function
Bubble Check Function: Redundant bubbles will occur when there is excessive detergent, which
will affect wash and rinse effects. The procedure will check automatically and one bubble removal
procedure will be added automatically to remove bubbles when excessive bubbles are checked.

www.heinner.com
17
TABLE OF WASHING PROCEDURES
The energy class is A+++
Energy test program: Cotton ECO 60/40℃
Speed: the highest speed; Other as the default.
Half load for 7.0Kg machine:3.5Kg.
Cotton ECO 60/40℃”are the “standard Cotton 60/40℃” programme and the standard washing
programs to which the information in the label and the fiche relates, and they are suitable to clean
normally soiled cotton laundry and that they are the most efficient programmes in terms of
combined energy and water consumptions for washing that type of cotton laundry,that the actual
water temperature may differ from the declared cycle temperature.
●Means must
○ Means optional
XMeans not necessary
Notes: The parameters in this table are only for user's reference. The actual parameters maybe
different with the parameters in above mentioned table.
WARNING!
- Solvents are forbidden to avoid that the washing machine is damaged, and toxic gases are
generated or exploded.
- Never use water to sprinkle and wash the washing machine.
- It is forbidden that the detergents containing PCMX are used to clean the washing machine.

www.heinner.com
18
Proper maintenance on the washing machine can extend its working life. The surface can be
cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water
overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed to strike the
cabinet.
Notes: formic acid and its diluted solvents or equivalent are forbidden.
CLEAN INTERNAL DRUM
The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents.
Never use steel wool.
DISPOSE A FROZEN WASHING MACHINE
When the temperature drops below zero and your washing machine gets frozen, you may:
1.Disconnect the power supply for the washing machine.
2.Wash the tap with warm water to loosen inlet pipe.
3.Take down inlet pipe and immerse it in warm water.
4.Pour warm water into washing drum and wait for 10 minutes.
5.Reconnect inlet pipe to the tap and check whether inlet and outlet are working normally.
Notes: when the washing machine is reused, make sure the ambient temperature is above 0 C
ANTI-FREEZE
If your washing machine is located in the room where it can get frozen easily, please drain
the remaining water inside drain pipe and inlet pipe thoroughly.
Remove the remaining water in inlet pipe:
1.Close the tap.
2.Screw off the inlet pipe from tap and put its end into the container.
3.Start up any procedure except single Wash or Drain procedure. Water will be drained out of inlet
pipe if any for about 40 seconds.
4.Reconnect the inlet pipe to tap.
Remove the remaining water in drain pump
WARNING!
To avoid burning, it shall be done after the hot water inside the machine cools down.
VIII. CLEANING AND MAINTENANCE

www.heinner.com
19
CLEAN DETERGENT BOX AND GROOVES
Clean detergent drawer and grooves
1.Press down the arrow location on softener cover inside the drawer.
2.Lift the clip up and take out softener cover and wash all grooves
with water.
3.Restore the softener cover and push the drawer into position.
CLEAN INLET FILTER
Inlet filter shall must be cleaned if there is not any or insufficient
water in when the tap is opened.
Clean the tap filter:
1.Close the tap.
2.Select any procedure except “Wash” or “Drain” procedure.
3.Press the button “Start/Pause” and keep the procedure running for
about 40 seconds.
4.Remove the inlet pipe from the tap.
5.Use water to wash the filter.
6.Reconnect the inlet pipe.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside of the machine.
2.Pull out the filter with long nose pliers and reinstall it back after
being washed.
3.Reconnect the inlet pipe.
4.Open the tap and make sure there is no water leakage.
5.Close the tap.
Notes: Generally, the tap filter is washed first and then the filter in
washing machine will be washed.
If only the filter in washing machine is washed, then the steps 1~3 in
cleaning the tap filter shall be repeated.