
Uses:Tooperatethemelter,yourequire three1.5VAAbatteries. Insert
thebatteriesasshowninthepicture.Beforeoperatingthe melter,take
oprotectivecap. and settheyellowslidetothe„ON“ position.To heat
the melter, press and hold down the blue button for 10-15 seconds.
A red light indicates that the melter is heating up. Should the Hard
Wax start smoking during melting, release the„ON“ button – the tip
coolsdownslowly.You can increasethe temperatureatany time while
pressingthe„ON“ button. Please do not forgettoreplacethecapwhen
melter is no longer needed.
Safety Instructions for Battery Melter: Alwaysstoremelter with cap
tted and ensure ON/OFF switch is set to OFF position. Tip becomes
hot during operation. Never bring the tool into contact with water.
Afteroperation,allowtipto cool down beforestorage.Alwaysturno
melterafteroperation,whilepushingtheswitchintotheOFFposition.
Disposal of electrical and electronic appliances and components:
For the sake of our environment and in order to recycle as completely
aspossibletherawmaterialsused,theend-userisrequestedtodeliver
used or defective appliances to a public waste collection point for
electronic scrap. A crossed-out wheeled bin symbol indicates that the
product is to be delivered to a collection point for electronic scrap to
ensure that raw materials are recycled in the best possible way.Thus,
youfullyourlegal duties andcontributetoenvironmentalprotection!
IT‘S JUST SO EASY...
picobello® by Heinrich König & Co. KG | Distributed by KONIG NORTH AMERICA, LLC
2800 Black Lake Place, Unit D PHILADELPHIA, PA 19154 | PHONE: 215 - 426 - 6216
1
2
The Picobello Battery Melter is designed for the melting of llers like hard wax and ceramic ller. The melter is powered by
3 x AA size batteries.The melter has a curved tip for mixing and optimal handling of the llers - even in corners and edges.
Handling and operation are simple.