HELVIA HTMA TOUCH Series User manual

HTMA TOUCH Series
6 Zones Mixer Amplier with 4.3” Touch screen, Timer, USB,
SD, BT and Tuner
Manuale d’uso
en-ita
Please read this manual carefully and keep it for future reference
Leggete questo manuale e conservatelo per future consultazioni
User Manual

Gentile Cliente,
Prima di tutto, grazie per aver acquistato un prodotto HELVIA®. La nostra missio-
ne e di orire soluzioni basate sulle tecnologie più aggiornate a tutte le esigenze
di integrazione di sistemi nei settori privati, commerciali e corporate.
Speriamo che siate soddisfatti da questo prodotto e, qualora vogliate partecipare,
saremmo molto lieti di poter ricevere il vostro feedback sul funzionamento del
prodotto e su possibili miglioramenti da apportare in futuro. Potete andare sulla
sezione CONTATTACI del sito www.frenexport.com e inviare una e-mail con la vo-
stra opinione; questo ci aiuterebbe a realizzare apparecchiature sempre più vicine
alle reali esigenze dei Clienti.
Vi preghiamo, inne, di leggere attentamente questo manuale di istruzioni prima
di utilizzare il prodotto; un uso incorretto potrebbe causare danni a voi e al pro-
dotto stesso: pensateci!
Il team HELVIA
Dear value Customer,
First, thank you for purchasing a HELVIA® product. Our mission is to oer
solutions based on the most up-to-date technologies for all systems integration
needs in the private, commercial and corporate sectors.
We hope you are satised with this product and, if you wish to participate, we
would be very pleased to receive your feedback on the operation of this product
and possible improvements for the future. You can go to “CONTACT” section of
www.frenexport.com and send an e-mail with your opinion; this would help us
make equipment that are closer to the real needs of our customers.
Finally, please read this user manual carefully before using the product; incorrect
use could cause damages to you and the product. Take care!
The HELVIA team

TABLE OF CONTENTS
1. PRECAUTIONS .................................................................................. 4
1.1. Important Safety Symbols................................................................................................ 4
1.2. Important Safety Instructions ......................................................................................... 4
2. GETTING STARTED........................................................................... 6
2.1. Unpacking..............................................................................................................................6
3. PRODUCT OVERVIEW ..................................................................... 6
3.1. Features: .................................................................................................................................7
4. INSTRUCTION....................................................................................7
4.1. Front Panel.............................................................................................................................7
4.2. Rear panel ..............................................................................................................................9
5. Microphone USE .............................................................................10
6. External audio source ....................................................................10
7. DISPLAY OPERATION ..................................................................... 11
7.1. Mode Selection .................................................................................................................. 11
7.2. Schedule Setup...................................................................................................................14
7.3. System Setting....................................................................................................................18
8. CONNECTIONS................................................................................18
9. SPECIFICATIONS..............................................................................19
10. WARRANTY AND SERVICE .......................................................... 20
11. WARNING........................................................................................ 20

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
4
1. PRECAUTIONS
1.1. Important Safety Symbols
The above warning is located on the rear of the unit
The lightening ash with arrowhead symbol within an equi-
lateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sucient magnitude to constitute a risk of elec-
tric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the product.
1.2. Important Safety Instructions
yRead these instructions
yKeep these instructions
yHeed all warning
yFollow all instructions
Water and Moisture
The apparatus should be protected from moisture and rain and can not be used
near water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
Heat
The apparatus should be located away from heat sources such as radiators, stoves
or other appliances that produce heat.
Ventilation
Do not block areas of ventilation opening. Failure to do could result in re. Always
install according to the manufacturer’s instructions.

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
5
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus
for safety.
Power Cord and Plug
In case of external power cord, protect it from being walked on or pinched partic-
ularly at plugs, convenience receptacles, and the point where they exit from the
apparatus. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two poles; a grounding-type plug has two poles and a
third grounding terminal. The third prong is provided for your safety. If the pro-
vided plug does not t into your outlet, refer to an electrician for replacement.
Power Supply
In case of products with external power adapter, the unit should be connected to
power adapters only of the type as marked on the apparatus or described in the
manual. Failure to do could result in damage to the product and possibly the user.
Unplug this apparatus during lightning storms or when unused for long periods.
Fuse
In case of products with external fuse holder, in order to prevent the risk of re
and damaging the unit, please use only of the recommended fuse type as de-
scribed in the manual. Before replacing the fuse, make sure the unit turned o
and disconnected from the AC outlet.
Noise and Interferences
Do not use the device in the nearby of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the device, TV, or radio may generate
noise.
Electrical Connection
Improper electrical wiring may invalidate the product warranty.
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
Servicing
Do not implement any servicing other than those means described in the manual.
Refer all servicing to qualied service personnel only. Only use accessories/attach-
ments or parts recommended by the manufacturer.

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
6
2. GETTING STARTED
2 .1 . Unpacking
Thank you for purchasing your HTMA TOUCH Series 6-Zones Mixer Amplier. All
units have been rigorously tested before leaving the factory, This product is wide-
ly used in schools, shops, bars, pubs, parks, parking lots, villas, and other places:
it is the ideal choice for public broadcasting. In order to facilitate your installation,
commissioning and use of this product, please read this manual before installa-
tion.
Carefully unpack the carton and check the contents to ensure that all parts are
present and in good conditions:
y1x HTMA TOUCH Series mixer amplier
y1x Set of screws for rack mount
y1x FM/AM Radio Antenna
y1x BT Antenna
y1x Stereo RCA cable
y1x Power Cord
yThis User manual
If anything damaged during transport, notify the shipper immediately and keep
packing material for inspection. Again, please save its carton and all packing
materials. If the unit must be returned to the manufacturer, it is important that
the unit is returned in the original manufacturer’s packing. Please do not take any
action without rst contacting us.
Our products are subject to a continuous process of further development. There-
fore modications to the technical features remain subject to change without
further notice.
3. PRODUCT OVERVIEW
HTMA TOUCH series is a line of ampliers for PA with integrated mixer whose
main feature is easy of use. The 4.3” TFT touch display allows weekly program-
ming of playlists, combining USB, SD-Card, FM & AM radio. It also oer BT
streaming connection to let you use tablets, mobile phones, and other BT devic-
es. The amplication stage oer powers ranging from 150W to 350W (100V for
each zone and the auxiliary output) to t dierent venue sizes. Therefore, HTMA
TOUCH are all-in-one tools that quickly solve all multi-zone PA needs in medi-
um-sized venues, such as shops, pubs, bars, restaurants and more.

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
7
3.1 . Features:
y6 zones output with separated switch control
y4.3” TFT touch screen.
yPlayer with USB, SD-Card, AM & FM Radio, BT Audio Streaming
yBuilt-in MP3 les player with program memory
yBuilt-in Radio with up to 40 radio channels
yBuilt-in BT receiver module
y1 AUX input, 1 Mic input, 1 AUX output
ySeparate volume control for USB/SD/FM/BT, AUX, and Mic inputs
yBass & Treble tone adjustment, with Master Volume control
yWeekly programmable schedule set with more than 100 daily presets
yMic input with muting priority
y100V Power Outputs
4. INSTRUCTION
4.1. Front Panel
HTMA-3506 TOUCH
350W 6-Zones Mixer Amplifier with Timer
Output Level
2 4 6 8 10
USB
POWER
MP3
Radio
Bluetooth
Bass Treble Master Volume
MP3/Tuner/BT Level AUX Level MIC Level MIC
+10-10
0
+10-10
0
0 10
0 100 100 10
1 2 3 4 5 6 7 8 9
10 11 12 13
1. Power Switch - Push to switch the unit on/o.
2. Power Indicator - It lights when the unit is on.
3. USB Input Socket - This Type-B female USB connector accepts USB drives in
FAT32 format (max. 32GByte) and plays MP3 and WMA les.
4. Audio Player buttons - This set of buttons includes:
• MP3 - It quickly accesses USB/SD mode pages. In case of both drives
connected to the related slots, it toggles between the two modes.
• Radio - It quickly accesses FM/AM Radio Page.
• Bluetooth - It accesses BT audio streaming page.

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
8
NOTE: Before playing audio in BT mode, you need to pair your device.
To do that, please access BT setting page on your device, and choose
“HELVIA” device.
• Rewind - In MP3 mode, press this button to switch to previous song in
the directory. In FM/AM mode, press this key to switch to previous stored
station in the list.
• Fast Forward - In MP3 mode, press this button to switch to next song in
the directory. In FM mode, press this key to switch to next stored station
in the list.
• Play/Pause - In MP3 mode, it pauses & plays current song. In FM mode,
it mutes the audio.
5. Display screen - This 4.3” TFT Touch screen easily allows you to control and
program the unit.
6. MP3/FM/BT Volume Knob - It controls USB/SD/Radio/BT Volume.
7. Aux Volume Knob - It adjusts AUX input signal volume.
8. MIC Volume Knob - It adjusts front panel Mic volume.
9. MIC Input Jack - Connect here microphones of unbalanced 600 ohm with
1/4″phone plug (6,3mm). Priority is active while the signal is sent to this Mic
input.
10. Output Level Meter - It indicates output level.
When all the five LEDs (+10dB) remain lit, it indicates that the sound
is distorted. In such case, adjust each volume controlling knob, until
LED element 4 (+8dB) and LED element 5 (+10dB) occasionally
flash.
11. Bass Knob - This knob adjusts the overall bass response.
12. Treble Knob - It adjusts the overall treble response.
13. Master Volume Knob - It adjusts total volume.

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
9
4.2. Rear panel
COM 100V
COM 100V
Zone1
COM 100V
Zone2
COM 100V
Zone3
COM 100V
Zone4
COM 100V
Zone5
COM 100V
Zone6
AUX IN AUX OUT ~220-240V/50-60Hz
Speaker Output
Bluetooth
Antenna
AM/FM Antenna
MIC2 Volume MIC3 Volume MIC2 MIC3
Turn off the power before inserting
or removing the SD-Card
0 10 0 10
MADE IN CHINA
0762600819090001
1 2 3 4 5 6
891011121314
7
1. FM/AM Antenna - The supplied antenna has 2 wires: there is no polarity.
Connect here the two wires and close the security lock.
2. AUX Input - You can connect here any Line-level stereo sources (CD-players,
DAB Radio Tuner, Mixers, Tablets, etc.). All these signals are muted when front
MIC audio exceeds mute threshold.
3. AUX Output - Connect here any power amplier, recording device, mixer or
other audio system.
4. SD-Card Slot - This SD-Card outlet accepts SD-Cards in FAT32 format (max.
32GByte) and plays MP3 and WMA les.
5. 6-Zone Output terminals - Connect here your 100V speakers.
WARNING: Pay attention to line polarity when connect speakers to
the unit. Each output has positive terminal (100V), and negative ter-
minal (COM).
6. AC Power Connector - Connect power cord to a mains outlet, paying atten-
tion that voltage is 220-240Vac/50-60Hz.
7. Fan Slot - This window assures good heat dissipation to your HTMA TOUCH
Series amplier.
Please be careful to not cover this slot, otherwise the equipment
could be damaged.
8. Fuse Holder - Unscrew to change internal fuse. In order to prevent the risk
of re and damaging the unit, please use only of the recommended fuse type
as described in Specications. Before replacing the fuse, make sure the unit
turned o and disconnected from the AC outlet.

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
10
9. 100V Auxiliary Output terminals - This output allows the user to connect
100V speakers. It is not controlled by 6-Zone buttons. It can be very useful,
for instance, if, in addition to the 6 zone 100V speaker lines, you also need a
local monitor and need to hear all schedules play lists no matter what zones
are active. In this case you can use this output for this purpose.
WARNING: Pay attention to polarity when connect speakers to the
unit. Each output has positive terminal (+), and negative terminal (-).
10. MIC3 Input Jack - Connect here microphones of unbalanced 600 ohm with
1/4″phone plug (6,3mm).
11. MIC2 Input Jack - Connect here microphones of unbalanced 600 ohm with
1/4″phone plug (6,3mm).
12. MIC3 Volume - This knob adjusts Mic3 level.
13. MIC2 Volume - This knob adjusts Mic2 level.
14. BT Antenna - Connect here the supplied BT antenna.
5. MICROPHONE USE
1. Turn MIC volume down before plugging the microphone (knob n.8 on front
panel).
2. Plug the 6.3mm connector int MIC jack (n.9 on front panel). Adjust Master
Volume (knob n.13 on front panel) and then turn gradually MIC volume so
that Output Level LED 8 and 10 occasionally lit (n.10 on front panel).
NOTE: MIC input has priority on other sound sources. This function is
helpful for enforcing an emergency broadcast or paging messages.
6. EXTERNAL AUDIO SOURCE
When you need to use other external sources (such as an external CD, DAB radio,
DVD, Tablets, etc.), connect any line-level audio sources to the stereo AUX input
(n.3 on rear panel). Adjust Master Volume (knob n.13 on front panel) and then
turn the AUX Volume knob (n.7 on front panel) to reach the appropriate volume,
so that Output Level LED 8 and 10 occasionally lit (n.10 on front panel).

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
11
7. DISPLAY OPERATION
7.1. Mode Selection
Turn on POWER switch and the unit will boot into following start screen:
Figure 1 - Boot Screen
Wait for about 10 seconds, then get into homepage (Figure 1).
Figure 2 - Main page
USB / SD Card
As the picture above shows, press USB drive or SD-Card button and you will go
into audio le playback control page. This interface has two lists: the left one
shows USB or SD-card directory catalog; the right one contains the audio le list
of the selected directory.

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
12
Figure 3 - USB/SD-Card player interface
Touch the screen to choose the les to play, and touch the upward or downward
arrow to browse directories and music les.
Touch Play/Pause, Rewind, and Fast Forward buttons to play, pause, skip to previ-
ous or next piece of music.
By pressing “Sequence” button, you can also choose between Sequence , Single
Loop, Single Play, All Loop.
NOTE: BT audio source cannot be used as audio source in schedule
function.
Press “” return button to go back to homepage.
FM/AM Tuner
In homepage, press radio button and you will go into FM/AM radio page.
Figure 4 - FM/AM Tune page

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
13
Press “Band Switch” button to switch between FM and AM receiving mode. Fre-
quency range are 87-108 MHz for FM, and 522-1620KHz for AM.
Press “Frequency+” and “Frequency-” buttons to scan frequencies by one step.
Every step is 0.05MHz in FM, 9KHz in AM.
Press “Up Searching” and “Down Searching” to run auto channel search. It will
automatically stops when searches one channel.
Press “Previous” and “Next” buttons to recall saved channels.
Press “Save Channel” button to store current Frequency as current channel
number. When you are going to save a frequency as stored channel, rst choose
the channel Number you are going to save in the frequency, recall the desired
frequency and nally press “Save Channel” to store it. This procedure allows the
user to recall through “Previous”/”Next” buttons the current frequency as saved
channels later.
The speaker logo button in upper right corner, when pressed (a red “X” appears
on it), mutes all radio stations and frequencies. Press again to play them again.
Press “” return button to go back to homepage.
BT Streaming
In the homepage, press “Bluetooth” button to get into Bluetooth page.
Figure 5 - Bluetooth page
Before using this function, you have to pair the HTMA TOUCH unit with your BT
device. To do that, enter BT setting page in your tablet, mobile phone or other
equipment, search a device called “HELVIA” in the Bluetooth available devices, and
connect to it. Now you can play your favorite play lists.

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
14
NOTE: BT audio source cannot be used as audio source in schedule
function.
Press “” return button to go back to homepage.
7.2 . Schedule Setup
In homepage, choose “Schedule” button, you will see the following page:
Figure 6 - Schedule edit page
HTMA TOUCH Series ampliers oer 8 schedule presets; any two of them be
selected alternatively by week. Each schedule can include SD-Card les, as well as
FM/AM channels. You cannot use USB, Bluetooth or AUX input sources.
The page is divided in two parts: the upper one allows the user to edit each
Schedule list; the lower one allows the user to select/deselect the 8 schedules.
Again, any two of them be carried out alternatively by week (in green).
For example, you can choose Schedule 1 to carry out in summer during rest time,
and Schedule 2 for winter rest time, if you don’t need dierent schedule program,
you can choose one schedule only.
Schedule Parameters
By pressing one of the 6 Schedule programs, you enter the Schedule list page.

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
15
Figure 7 - Week schedule list
Here you can see a list of “actions”, that is a set on information that will be execut-
ed by the HTMA TOUCH unit once saved and selected in the previous schedule
page. These information are:
• Start time in hours, minutes, seconds
• Week days from Sunday to Saturday
• Audio source (SD-Card, FM channels, AM channels)
• Zone outputs from 1 to 6
You can select each of the rows in the list (in green after selection) and edit (press
“Edit” button), delete a single raw (“Selected Delete” button), Add new raws (“Add”
button) or clear the whole list (“Empty” button). Maximum executable actions in a
single schedule are 10.
NOTE: You can not have two schedule points at the same time (so
play attention to choose different times). Schedule actions will be or-
dered in the list and executed from 00hour-00min-01sec to 24hour-
59min-59sec, no matter what order you enter any single schedule
points.
Schedule Editing
By selecting one of the raws in a schedule list and pressing “Edit” button, you
access the following page:

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
16
Figure 8 - Schedule action editing
In case of schedule already saved and under editing, you can read the values
stored. In case of new action added to the list shown in “Figure 7 - Week schedule
list” at page 15”, all values are blank.
To set the week days in which the audio source will play, press the related week
day buttons (green once pressed).
To set starting time, press, in turn Hour, Min and Sec elds. A setup window will
automatically open and you can enter the desired vaule and conrm with “OK”
button.
Figure 9 - Time setup window
Then you need to set the zone/zones you want to be active on or o, and nally
you have choose the sound source to play.
Press repeatedly “MP3/FM” button to choose among SD-Card, FM, and AM
sources. Then press “Select MP3 Audio” button. You will enter the page in which
you can browse all directories and choose MO3 les to be played by the sched-
uled play list.

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
17
Figure 10 - SD-Card le selection page
You can also decide if play in loop mode or not. After added all les, press “Save”
button to conrm.
Press “” return button to go back to previous page.
If you want to add also FM or AM stations to your schedule, from the setting
schedule page shown in “Figure 8 - Schedule action editing” at page 16, pre
“Select FM Channel” button. You will enter a new page in which you can select
one of the 40 stored channels. Same page is accessible if you choose AM Radio.
Figure 11 - FM/AM channel selection page
Once chosen your preferred station, press “Save” to conrm, then “” to return to
“Figure 8 - Schedule action editing” at page 16.
Now you can nally save your schedule by pressing “Save” button. You will come
back to “Figure 7 - Week schedule list” at page 15.
If you do not want to add further actions to the schedule list, you can then press
“” return button to go back to Schedule selection “Figure 6 - Schedule edit

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
18
page” at page 14.
NOTE: If during schedule playback you want to pause the output at
one schedule point (for example you want to pause MP3 playback),
you can pause it by choosing a certain MP3 file or a radio station in the
sound source of the scheduled point. Scheduled playback will con-
tinue according to stored list at next scheduled point.
7.3. System Setting
From homepage (“Figure 2 - Main page” at page 11) press “Setting” button.
You will enter the system setting interface.
Figure 12 - Setting page
Here you can adjust current system date and time. You can also adjust back-light
(Automatic or Normally open), and Touch-screen sound (Normally open or Nor-
mally close).
Press “Save” to conrm, then press “” to go back to homepage.
8. CONNECTIONS
The following picture shows a typical way to use HTMA TOUCH Series mixer
ampliers.

HTMA TOUCH Series
6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
19
COM 100V
COM 100V
Zone1
COM 100V
Zone2
COM 100V
Zone3
COM 100V
Zone4
COM 100V
Zone5
COM 100V
Zone6
AUX IN AUX OUT ~220-240V/50-60Hz
Speaker Output
Bluetooth
Antenna
AM/FM Antenna
MIC2 Volume MIC3 Volume MIC2 MIC3
Turn off the power beforeinserting
or removing the SD-Card
0 10 0 10
MADE IN CHINA
0762600819090001
CD/DAB Radio/DVD/etc.
MIC1
with priority
(Front Panel)
Zone 6
Zone 5
Zone 4
Zone 1
Zone 2
Zone 3
MIC2 MIC3
100V Speakers
(monitor only. No volume control)
Amplifier
100V Lines
9. SPECIFICATIONS
Model HTMA-1506 TOUCH HTMA-2506 TOUCH HTMA-3506 TOUCH
Rate power 150W 250W 350W
Speaker Outputs 100V
Harmonic Distortion <0.5% (1kHz, 1/3 rate power)
AUX Output 100ohm, 1V (0dBV)
Input Mic: 600ohm, 8mV (±10%); Line: 10kohm, 300mV (±10%), unbalanced
Line Freq. response 50Hz-20kHz (±3dB)
Mic Freq. response 40Hz-16kHz (±3dB)
Harmonic distortion < 0.5% (1kHz, 1/3 rated power)
S/N Ratio Mic: 70dB; Line: 80dB
2-Band EQ Bass: ±10dB (100Hz); Treble: ±10dB (10kHz)
BT Receiving Distance 10m
BT Standard BT2.1+EDR
USB Connection Type-B, Female
USB/SD-Card Format: FAT32 format – max 64GByte
Player File Formats: MP, WMF, and BT streaming
Protection AC fuse, DC output protection, overload protection
Power Supply AC220-240V/50-60Hz
Fuse F4AL-250V
Power Consumption 220W 350W 450W
Unit Size (W×D×H) 418×338×88 mm
Package Size (W×D×H) 550x460x190 mm
Unit Weight 8,6kg 9,1kg 9,3kg
Package Weight 9,32kg 9,82kg 10kg
Our products are subject to change. Modications to technical features remain subject to change without notice

HTMA TOUCH Series 6 Zones Mixer Amplifier with Timer, USB, SD, BT, Tuner
20
10. WARRANTY AND SERVICE
All HELVIA® products are covered by warranty according to European regulations (2 years
in the case of purchase by private person - B2C; 1 year in the case of purchase by company
- B2B). The warranty is valid from the date of purchase by the end user (private individual
or company), indicated in the purchase document (receipt in the case of private person;
invoice in the case of company). The following cases / components are not covered by the
above warranty:
yAll accessories supplied with the product;
yImproper use;
yFailure due to wear and tear;
yAny unauthorized modication of the product by the user or third parties.
HELVIA must meet the warranty obligations due to any non-compliant materials or manu-
facturing defects, by remedying free of charge at HELVIA’s discretion by either repairing or
replacing specic parts or the entire equipment. Any defective parts removed by a product
in the event of a warranty claim become property of HELVIA.
During the warranty period, defective products can be returned to HELVIA retailer or
installer with proof of original purchase (receipt or invoice). To avoid damage during trans-
port, please use the original packaging, if available. For more information, visit the website:
www.frenexport.com.
11. WARNING
READ CAREFULLY - only for EU and EEA (Norway, Iceland and Liechtenstein).
This symbol indicates that the product must not be disposed of with household waste,
according to the WEEE directive (2202/96/EC and subsequent amendments) and national
legislation.
The product must be delivered to a designated waste collection center (e.g. on an autho-
rized one-for-one basis when you buy a new similar product, or to an authorized collection
site for recycling waste electrical and electronic equipment).
Improper handling of this type of waste can have a negative impact on the environment
and human health due to potentially dangerous substances that are generally associated
with electrical and electronic equipment. At the same time, your cooperation in the proper
disposal of this product will contribute to the eective use of natural resources.
For more information about where you can drop o your waste equipment for recycling,
please contact your local city oce, waste authority, approved WEEE scheme or your
household waste disposal service.