HERALD H-RGBC-24IRS User manual

RF Music Controller with Remote
Item Model: H-RGBC-24IRS
Have your LED lights flash or fade to the beat of music with this LED light controller. It uses
12V input power and has 3 output ports for RGB colour changing strips. Easily control your
colour changing LED strips via the IR wireless remote. You can choose between 15 solid
colours, solid white, flashing, fading, 2 music modes, adjust brightness, and on/off.
This controller is perfect for controlling our RGB strips or RGB colour changing bulbs.
Before installing this product, please read this manual carefully to ensure full
understanding of the specification to avoid unnecessary damage.

Directions for use
•The supply voltage for this product is DC 12V-24V, never connect to a mains voltage.
•Always connect the load first then apply the power taking care not to short circuit.
•Lead wires should be connected according to the connection diagram.
•Do not overload the controller. Refer to technical specifications.
•Remove the isolation tab from the remote control battery.
Features
•Mode select
•Speed function
•Brightness control
•Sound to Light (Using Built-in Mic)
•Voice Receiving Sensitivity
•3 Output Settings
•16 Colours
•2 Kinds of Acoustic change-modes
•AUX input
•20m Range
Technical Specifications
Controller：
•Operating Temperature: -20°C +70°C
•Supply Voltage: DC 12V - 24V
•Output: 3 Channels
•Connection Mode: Common Anode
•Output Current: 3A x 3Ch = 9A 3A per channel
•Output Grey Level: RGB 256 Lever each
•Controller Dimensions: L 155 x W 75 x H 30mm
•Net Weight: 157g

External dimensions:
Controller
Remote Control

Interface Specifications:
Standard DC Power input Load output Interface:

Remote Control Instructions:
Button
Function
Turn ON
Turn OFF
In static mode: brightness -in dynamic mode: speed -
In static mode: brightness +, in dynamic mode: speed +
Hot key for 16 kinds of static colour, brightness are adjustable
Dynamic model: seven colour jump to change, can adjust the rate of change
Dynamic model: seven colour fade, can adjust the rate of change

Acoustic modes：will flash and switch between 16 colours according to the rhythm
of the music, if NO music will be NO light
(the sounds sensitivity can be adjusted by the induction resistance)
Acoustic modes：will fade and switch between 16 colours according to the rhythm
of the music, if NO music will be NO light (the sounds sensitivity can be adjusted by
the induction resistance)
Typical Applications
DC+：For power input +（power supply voltage DC 12V-24V）
DC-：For power input -
Notes:
•The load voltage, current and power must be consistent with the product.
•Please make the connection as per the diagram above – ensure you connect the
load wire before connecting the power. When in use avoid short circuits.