Hercules 4-Mx User manual

ITALIANO DEUTSCHESPAÑOL NEDERLANDS ENGLISHFRANÇAIS
CONTENTS
1. INTRODUCTION................................................................................................................ 3
2. MINIMUM SYSTEM REQUIREMENTS.............................................................................. 3
3. INSTALLATION ................................................................................................................. 4
3.1. Installing drivers and software .................................................................................... 4
3.1.1. Installation in Windows 7 / Vista ..................................................................... 5
3.1.2. Installation in Windows XP.............................................................................. 7
3.1.3. Installation on Mac .......................................................................................... 8
3.2. Connecting and disconnecting your DJ Console 4-Mx............................................. 10
4. OVERVIEW ...................................................................................................................... 11
4.1. The top panel ............................................................................................................ 11
4.2. The back panel ......................................................................................................... 13
4.3. The front panel.......................................................................................................... 14
5. THE DJ CONSOLE 4-MX CONTROL PANEL ................................................................ 15
5.1. Accessing the control panel on PC........................................................................... 15
5.2. Accessing the control panel on Mac ......................................................................... 15
5.3. Using the DJ Console 4-Mx control panel ................................................................ 15
5.3.1. General control panel settings ...................................................................... 16
5.3.2. Main tab ........................................................................................................ 17
5.3.3. ASIO tab (not available on Mac)................................................................... 17
5.3.4. Audio tab (not available on PC) ................................................................... 18
5.3.5. Advanced tab ............................................................................................... 18
5.3.6. About tab...................................................................................................... 19
6. OUTPUT OPTIONS.......................................................................................................... 20
6.1. Connecting speakers and/or an external mixer to your DJ Console 4-Mx ............... 20
6.2. Connecting headphones........................................................................................... 20
7. INPUT OPTIONS.............................................................................................................. 21
7.1. Connecting external audio sources .......................................................................... 21
7.2. Connecting a microphone ......................................................................................... 22

8. DJ CONSOLE 4-MX FEATURES.....................................................................................22
8.1. Jog wheels ................................................................................................................22
8.2. Faders (sliders) .........................................................................................................23
8.3. Play/Pause, and Cue buttons.................................................................................... 23
8.4. Stop button ................................................................................................................ 24
8.5. Rewind and Fast forward buttons .............................................................................24
8.6. Pitch settings ............................................................................................................. 24
8.7. Source buttons ..........................................................................................................24
8.8. Shift button (for loops/cue/sampler/effects), and buttons 1-6 ...................................25
8.9. Load on Left Deck / Load on Right Deck buttons......................................................25
8.10. Cue Select Left Deck / Cue Select Right Deck buttons ............................................ 25
8.11. Browser buttons: Up and Down.................................................................................25
8.12. Cue/Mix knob ............................................................................................................25
8.13. Equalization knobs .................................................................................................... 25
9. DJING BASICS ................................................................................................................26
10. CONFIGURATION IN MIDI MODE...................................................................................27
11. FAQ ................................................................................................................................27
12. TECHNICAL SUPPORT...................................................................................................28
12.1. Warranty information.................................................................................................29
12.2. Additional warranty provisions...................................................................................29
ENVIRONMENTAL PROTECTION RECOMMENDATION .......................................................30

ITALIANO DEUTSCHESPAÑOL NEDERLANDS ENGLISHFRANÇAIS
User Manual – 3/30
1. INTRODUCTION
DJ Console 4-Mx is a high-performance DJ controller that opens up the doors to mixing music on
your computer. DJ Console 4-Mx is a 4-deck controller, allowing you to control up to 4 audio
tracks on independent decks, thereby giving you great flexibility in terms of mixing. Intuitive and
fun to use, DJ Console 4-Mx lets you put your own mark on your favorite music and share it with
your friends to host great parties or make creative mixes.
DJ Console 4-Mx comes bundled with a tailored version of the VirtualDJ mixing software,
compatible with both PC and Mac: the software features an interface that has been tailored for the
DJ Console 4-Mx, and supports 4-deck mixing. With many useful features and mixing functions,
VirtualDJ makes it easy to mix like a pro! DJ Console 4-Mx measures 40cm x 25cm (15.7” x
9.8”): large enough for comfortable mixing with tons of controls, but still compact enough to be
portable. DJ Console 4-Mx also includes its own carry bag, making it easy to take with you
wherever you go.
DJ Console 4-Mx functions with digital audio files, including MP3s. We would like to draw your
attention to the fact that musical creations are protected by copyright and that you should comply
with all applicable laws. We strongly encourage you to support artists by acquiring their works
legally.
2. MINIMUM SYSTEM REQUIREMENTS
PC:
Desktop/laptop PC with Intel Pentium III/Athlon 1.5GHz or compatible processor or higher
Operating system: Microsoft Windows XP® / Vista® / 7™ (32 or 64-bit)
1GB RAM
Available USB bus-powered port: USB 2.0 (recommended) or USB 1.1
Headphones and amplified speakers
CD-ROM or DVD-ROM drive
Graphics card supporting 1024 x 768 resolution
Internet connection (strongly recommended) + 100MB free disk space for installing
applications
Mac:
Desktop/laptop Mac with 1.5 GHz processor (G4, G5, Core Duo Series) or higher
Operating system: Mac OS 10.5 / 10.6
1GB RAM
Available USB bus-powered port: USB 2.0 (recommended) or USB 1.1
Headphones and amplified speakers
CD-ROM or DVD-ROM drive
Graphics card supporting 1024 x 768 resolution
Internet connection (strongly recommended) + 100MB free disk space for installing
applications

4/30 – User Manual
3. INSTALLATION
3.1. Installing drivers and software
On both PC and Mac: prior to inserting the installation CD-ROM in your computer,
make sure that you have Administrator rights on your system. Do not install the DJ Console 4-
Mx with a Guest account: the installation may fail, as you need permission to write in the
Documents folder to install the VirtualDJ software.
- Insert the installation CD-ROM in your CD-ROM drive.
The installation menu for your DJ Console 4-Mx appears
automatically.
- Click Install DJ Console 4-Mx.
If the installation menu is not launched
automatically:
PC:
- Double-click My Computer (Windows XP) or Computer
(Windows Vista / 7).
- Double-click the CD-ROM icon.
- Double-click the installer package.
Mac:
- Open your Finder.
- Double-click the CD-ROM icon.
- Double-click the installer package.
- Click on the option to install the DJ Console 4-Mx drivers and
follow the on-screen instructions.

User Manual – 5/30
3.1.1.Installation in Windows 7 / Vista
Once files have been copied to your computer, the drivers will be installed. Windows displays
three prompts in succession, regarding installation of the various components.
ENGLISHFRANÇAIS
- Accept to install the software at each of these prompts to proceed with the installation.
DEUTSCH
A dialog box appears, prompting you to connect DJ Console 4-Mx to your computer's USB port.
NEDERLANDSITALIANO
- Connect DJ Console 4-Mx to your computer's USB port, then click Next.
Your computer automatically detects the DJ Console 4-Mx and completes the installation of the
required drivers.
ESPAÑOL

6/30 – User Manual
Please note that installation of the drivers may take some time, depending on your
computer’s performance. Let the installation procedure run its course and follow the on-screen
instructions.
You are notified when the installation is complete.
The DJ Console 4-Mx icon appears in your Windows taskbar, next to the clock, indicating that
your DJ Console 4-Mx is installed and ready for use:
Please note that in Windows 7, you must click on the Windows taskbar in order to
accept that the DJ Console 4-Mx icon be displayed in the taskbar.
You are notified when the installation is complete.
You should now install the VirtualDJ DJC Edition mixing software on your computer:
- In the installation menu, click Install VirtualDJ DJC Edition
and follow the on-screen instructions.
The software is installed on your computer. When installation is complete, the VirtualDJ icon
appears on your desktop.

User Manual – 7/30
- Double-click the VirtualDJ icon and enter the VirtualDJ serial number, then click OK. The
VirtualDJ serial number is indicated on a sticker with a barcode found on the underside of your DJ
Console 4-Mx. The VirtualDJ serial number is in the following format: XXXX-XXXX-XXXXX/4-Mx.
For more information on configuring your DJ Console 4-Mx, please refer to chapter 5. The DJ
Console 4-Mx control panel.
3.1.2.Installation in Windows XP
ENGLISH
Once files have been copied to your computer, the drivers will be installed.
A dialog box appears, prompting you to connect DJ Console 4-Mx to your computer's USB port.
FRANÇAISDEUTSCH
- Connect DJ Console 4-Mx to your computer's USB port, then click Next.
NEDERLANDS
Your computer automatically detects the DJ Console 4-Mx and completes the installation of the
required drivers.
ITALIANOESPAÑOL
NOTE: Do not interact with any Windows hardware detection windows that may appear during
the installation process; any such windows will disappear in a short while on their own.
Please note that installation of the drivers may take some time, depending on your
computer’s performance. Let the installation procedure run its course and follow the on-
screen instructions.

8/30 – User Manual
You are notified when the installation is complete.
The DJ Console 4-Mx icon appears in your Windows taskbar, next to the clock, indicating that
your DJ Console 4-Mx is installed and ready for use:
You should now install the VirtualDJ DJC Edition mixing software on your computer:
- In the installation menu, click Install VirtualDJ DJC Edition
and follow the on-screen instructions.
The software is installed on your computer. When installation is complete, the VirtualDJ icon
appears on your desktop.
- Double-click the VirtualDJ icon and enter the VirtualDJ serial number, then click OK. The
VirtualDJ serial number is indicated on a sticker with a barcode found on the underside of your DJ
Console 4-Mx. The VirtualDJ serial number is in the following format: XXXX-XXXX-XXXXX/4-Mx.
For more information on configuring your DJ Console 4-Mx, please refer to chapter 5. The DJ
Console 4-Mx control panel.
3.1.3.Installation on Mac
A welcome screen is displayed, informing you as to what will be installed.

User Manual – 9/30
- Follow the on-screen instructions.
You may need to enter your password in order to proceed if Administrator access is
required on your system.
Once files have been copied to your computer, the drivers will be installed.
ENGLISH
A dialog box appears, prompting you to connect DJ Console 4-Mx to your computer's USB port.
FRANÇAIS
- Connect DJ Console 4-Mx to your computer's USB port.
DEUTSCH
Your computer automatically detects the DJ Console 4-Mx and completes the installation of the
required drivers.
NEDERLANDSITALIANO
Please note that installation of the drivers may take some time, depending on your
computer’s performance. Let the installation procedure run its course and follow the on-
screen instructions.
ESPAÑOL
You are notified when the installation is complete.
The DJ Console 4-Mx icon appears on your desktop, indicating that your DJ Console 4-Mx is
installed and ready for use:

10/30 – User Manual
You should now install the VirtualDJ DJC Edition mixing software on your computer:
- In the installation menu, click Install VirtualDJ DJC Edition
and follow the on-screen instructions.
The software is installed on your computer.
- To launch the VirtualDJ software on your Mac, go to Applications and then select VirtualDJ.
- Enter the VirtualDJ serial number, then click OK. The VirtualDJ serial number is indicated on a
sticker with a barcode found on the underside of your DJ Console 4-Mx. The VirtualDJ serial
number is in the following format: XXXX-XXXX-XXXXX/4-Mx.
For more information on configuring your DJ Console 4-Mx, please refer to chapter 5. The DJ
Console 4-Mx control panel.
3.2. Connecting and disconnecting your DJ Console 4-Mx
Your DJ Console 4-Mx can be used in conjunction with another sound card, whether internal or
external, without creating conflicts on your computer.
Please note that in Windows operating systems, when you connect your DJ Console 4-
Mx, it becomes the system’s default sound card. The sound card previously set as the default
sound card becomes the default sound card again when you disconnect the DJ Console 4-Mx.
Therefore, once properly installed, you can connect and disconnect your DJ Console 4-Mx at any
time, even when your computer is powered on, thanks to its USB hot-plug function (although you
should never do so when DJ Console 4-Mx is playing or recording music, or else the application
will terminate and display an error message).

User Manual – 11/30
4. OVERVIEW
4.1. The top panel
Your DJ Console 4-Mx features a variety of controls allowing you to interact with DJ software.
You can control up to 4 independent decks in DJ software. Descriptions of the default function of
each control are provided below.
ENGLISH
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
FRANÇAISDEUTSCHNEDERLANDSITALIANO
34 33 32 31 30 29 28 27 26 25
1. Microphone input (1/4" jack / 6.35mm)
2. Microphone level control knob
3. Microphone on/off button
ESPAÑOL
4. Deck Switch button: depending on the deck mode you select in the control panel, pressing
this button will either: toggle between decks A and C, or B and D (in 4-deck mode, by default);
give you access to a second set of buttons for the deck in question (in 2-deck extended
mode); or have no effect (in 2-deck basic mode). Please see section 5.3.1. Advanced tabfor
more information.
5. Pitch Scale buttons: adjust the pitch scale in DJ software up or down (for example, change
the pitch scale range from 6% to 12% in the VirtualDJ software)
Tip: press Pitch Scale - and Pitch Scale + at the same time to reset the pitch: the virtual
pitch fader returns to the central position (while the hardware fader doesn't move).

12/30 – User Manual
6. Shift button: converts buttons 1 to 6 on the corresponding deck into buttons 7 to 12, providing
the equivalent of 12 buttons per deck.
7. 1-2-3-4-5-6 buttons: Apply loops on different numbers of beats, when in loop mode; apply the
corresponding effect, when in effects mode. Functions include: loop in, loop out, hot cue
1/2/3/4, sampler record, sampler play and 4 effects
8. Rewind and fast forward: fast browsing inside the audio track
9. Press to toggle between computer audio files or an external audio source on the
corresponding deck
10. Kill buttons: press to cut out/restore treble, medium and bass frequencies, respectively
11. Scratch button: disable or enable scratch mode
12. Folder button: browse in the upper directory; also functions as left arrow button
13. Master volume knob
14. Up and Down buttons: press to navigate within menus
15. Auto button: applies the “mix next” function, automatically mixing the track so that it plays
next
16. Files button: browse in the currently selected folder; also functions as right arrow button
17. Set the gain for the corresponding deck
18. Increase or decrease Treble/Medium/Bass frequencies
19. Turn to modulate the selected effect or loop
20. Cue/Mix knob: adjust the mix of what's being played on your headphones - the track you’re
cueing up in relation to the overall mix
21. Adjust the volume on your headphones
22. Pitch bend: decrease (-) or increase (+) speed of track (i.e. pitch) for accurate mixing
23. Pitch fader: adjust the playback speed of the track on the corresponding deck
24. Headphones input (1/4" jack / 6.35mm)
25. Stop button: stop playback of the track on the corresponding deck
26. Play/Pause track
27. Sync button: synchronize the beat with the beat of the track currently loaded on the opposite
deck that you are controlling, if this beat is within the pitch range (if the reference beat is too
far off, you must increase the pitch scale prior to pushing the Sync button)
28. Vinyl-style jog wheel with touch detection: a blue light in the center of the jog wheel lights up
when the jog wheel is pressed down
29. Load selected track on the corresponding deck
30. Deck indicators: lights up to show you which deck is currently in use
31. Cross fader for seamless mixing between the decks
32. Volume fader: control the volume for the corresponding deck
33. Cue Select button: enable headphone monitoring on the corresponding deck
34. Cue button: set cue point (mark position in the track) on the corresponding deck
These are descriptions of the DJ Console 4-Mx’s default functions in the VirtualDJ
software, which may vary according to the application you are using.

User Manual – 13/30
Please note that the Cue/Mix knob is a software function only (and not a hardware
function). This means that when you are using the VirtualDJ software, the knob functions as
described above; while if you are not using DJing software, this knob will have no function –
unless you map a “Cue to Mix” function onto it.
4.2. The back panel
ENGLISH
DJ Console 4-Mx has a USB connector on its back panel, allowing you to connect it to your
computer. As DJ Console 4-Mx is USB bus-powered, no external power source is required.
FRANÇAIS
ITALIANO DEUTSCHESPAÑOL NEDERLANDS
RCA mono output
connectors 3-4
RCA mono output
connectors 1-2
1/4” (6.35mm) mono
output connectors 3-4
RCA mono input
connectors 3-4
RCA mono input
connectors 1-2
1/4” (6.35mm) mono
output connector 2
1/4” (6.35mm) mono
output connector 1
Ground Lift
switch
Phono ground
connector
USB connector
When connecting a microphone, the microphone can only be used on input channels 1-
2 (please see the front panel description, below). For more information on selecting input
levels for inputs 1-2 and 3-4, please refer to chapter 5.3.1. General control panel settings.
The Ground Lift switch, available on the 1/4” (6.35mm) mono output connectors 1 and
2, can be useful in the event that a ground loop is disturbing the connection between the
console and a power amplifier. In a room with a proper electrical setup, it is safer and better to
keep the Ground Lift switch Off (the default setting). The Ground Lift switch is not active on
RCA outputs 1-2.

14/30 – User Manual
4.3. The front panel
1/4” (6.35mm)
microphone input
connector:
channels 1-2 only
1/4” (6.35mm)
headphone output
connector
Headphones: When using headphones, they are set to channels 3-4 by default; however, you
can also set them to channels 1-2 instead. For more information, please refer to chapter 5.3.5.
Advanced tab.
Before using your DJ Console 4-Mx for the first time, you must unlock the jog wheels:
the jog wheel locks are located on the underside of the controller, preventing the jog wheels
from moving during shipment. If the locks are ON, you can turn the jog wheels, but you can’t
push them down, which disables the touch detection feature.

User Manual – 15/30
5. THE DJ CONSOLE 4-MX CONTROL PANEL
5.1. Accessing the control panel on PC
An icon representing your DJ Console 4-Mx appears in the right-hand side of your taskbar, next to
the clock display: . To launch the DJ Console 4-Mx control panel, simply left-click the icon.
ENGLISH
In Windows, this icon consolidates all Hercules DJ products you may have installed on your
system. You can select your DJ Console 4-Mx’s control panel by right-clicking the icon and
choosing Select Device.
By right-clicking the icon, you can also select to open the control panel (an alternative to left-
clicking the taskbar icon as described above), get hardware information about your DJ Console 4-
Mx, check for updates for your DJ Console 4-Mx, or exit the control panel. Please note that in
order to check for updates, you must have an active Internet connection.
FRANÇAIS
To check for updates for your DJ Console 4-Mx:
- Right-click the DJ Console 4-Mx icon in the taskbar and select Check for updates.
DEUTSCH
- If prompted by your system, allow your computer to access the Guillemot FTP server.
If no new version is available, a message will appear indicating that you already have the latest
version installed. If a new version is available, it will be downloaded and the setup will launch
automatically.
NEDERLANDS
- Follow the on-screen instructions to install the update for your DJ Console 4-Mx.
5.2. Accessing the control panel on Mac
- Access the control panel by double-clicking the icon on your desktop.
ITALIANO
5.3. Using the DJ Console 4-Mx control panel
The control panel allows you to manage your DJ Console 4-Mx’s various settings. The following
sections will explain the various features of the control panel, as well as the differences that exist
between the PC and Mac versions.
ESPAÑOL

16/30 – User Manual
5.3.1.General control panel settings
PC Mac
- Output Channels: There are 2 sets of software sliders (1-2, 3-4), which function as volume
controls for the corresponding outputs. You can alter the balance (left/right) using the balance
knob on top of each set of output channel sliders. You can click the link icon underneath the
sliders to disable/enable the sliders moving together, as opposed to on their own. You can also
mute the outputs by clicking the volume icon underneath the link icon.
- Input Channels: You can select the appropriate input level for input channels 1-2 and 3-4:
microphone, phono level, consumer line level (-10dBv), pro line level (+4dBu) or boosted line
level (+8dBu) for channels 1-2; and phono level, consumer line level, pro line level or boosted
line level for channels 3-4 (you can therefore only use a microphone on channels 1-2, and not
channels 3-4). Select the input level that best corresponds to the output level of the audio
source connected to input channels 1-2 and 3-4.
Please note that when recording your microphone, you temporarily lose the use of inputs 1-2.
When you use the talkover option for your microphone, your voice is mixed via hardware and
you can still use inputs 1-2; however, you cannot record your microphone with this configuration.
- Audio mode(Windows only, not available on Mac): Lets you select the appropriate audio mode
for the applications you wish to use:
- WDM is the standard Windows audio mode, also called DirectSound and WASAPI. Select
this mode when using multimedia players, watching movies, and so on.
- ASIO will only work with programs that support this driver mode (for more information, please
refer to chapter 5.3.3. ASIO tab).
VirtualDJ switches to ASIO mode automatically, but if you are using other programs, you must
switch to ASIO mode manually before launching the application. You can only switch between
modes when playback is stopped.
- Select Device (Mac only): If you have more than one DJ Console 4-Mx controller connected to
your Mac, you can switch between their control panels here.
- MIDI pitch resolution: 7-bits is the default value. VirtualDJ automatically switches to 14-bit
mode when the software is launched, and then reverts to 7-bits mode when you exit the
software.

User Manual – 17/30
5.3.2.Main tab
- You can disable/enable or adjust the talkover attenuation level in this tab, meaning the level by
which the music is reduced when you activate the Mic On/Off button and are talking on your
microphone (-6dB by default).
- You can disable and re-enable the jog wheels in this tab as well, and set their sensitivity. By
default, all jog wheels are enabled; if you choose custom mode, only the jog wheels for Deck A
and Deck B are enabled by default, although you can change this to your liking.
ENGLISH
5.3.3.ASIO tab (not available on Mac)
FRANÇAISDEUTSCH
“Audio Stream Input/Output” is a multi-channel protocol for audio transfer developed by the
Steinberg company. It allows a variety of programs to communicate with different sound cards
and recognize all of the inputs and outputs available on the sound card, with short latency. Your
DJ Console 4-Mx is ASIO 2.0 compliant.
NEDERLANDS
When in ASIO mode, you can adjust the following settings: Sample Rate, Sample Size, ASIO
Buffer Size.
ITALIANO
- The configuration is set to 44100Hz (44.1kHz)/16-bit mode by default. The best audio setting for
VirtualDJ is this default setting, which provides the best response time. For software where
response time is not as important, you can play music in 24-bit mode (44.1kHz or 48kHz) in
Windows (ASIO).
- The most important setting is the ASIO buffer size. The default setting is 480 (10ms), which is a
good average for most computers. Note that the smaller the ASIO buffer size, the shorter the
response time. If you encounter audio problems (such as static or crackling), increase or
decrease the ASIO buffer size until you find the correct setting for your computer (there are no
ideal settings, as all computer configurations are different).
ESPAÑOL
- Changes to the ASIO settings can only be made while your application is not running.
- Please note that when switching to 24-bit mode, inputs 3-4 are not available.

18/30 – User Manual
5.3.4.Audio tab (not available on PC)
In the Audio tab (on Mac only), you can change the sample size from the default value (16-bit) to
24-bit. The best audio setting for VirtualDJ is the default setting of 16-bit/44.1kHz, which provides
the best response time. For software where response time is not as important, you can play music
in 24-bit mode (44.1KHz or 48 KHz) in Mac OS (Core Audio).
5.3.5.Advanced tab
- This tab allows you to set the MIDI channel for controls (1-2, by default), in the event that there
is some conflict between your DJ Console 4-Mx and another MIDI device. If you have more
than one Hercules device installed on your system, the MIDI channel numbers are assigned in
pairs by order of connection, i.e. incrementally (1-2, 3-4 and so on, up until 16).
- You can adjust the cross fader settings according to your preference (BeatMix Curve by
default). The different settings that are available affect the way that the cross fader functions as
you move it from side to side, in relation to the central position: depending on how you will be
mixing, you may wish for the cross fader’s action to be applied much more sharply when it is
moved from the central position (meaning that if you move the cross fader even a little bit to the
left, for example, the effect will be as though it had been moved all the way to the left; and the
same when moving it to the right), or less sharply. You can experiment with the different curves

User Manual – 19/30
available and easily switch from one to another, depending on the kind of mixing you are doing
at any given time.
- The headphone channels are set to output channels 3-4 by default. You can also set this to
output channels 1-2, if you prefer; however, you will then hear the mix on your headphones
instead of previewing your next track.
- Output 1-2 Hardware mix option lets you select the way that hardware mixing will be handled
on output 1-2: USB streaming 1-2 (default), USB streaming 1-2 plus your microphone, or USB
streaming 1-2 plus line in 1-2.
ENGLISH
USB streaming 1-2 (default) should always be used for standard operations (i.e with DJ
software). USB streaming 1-2 plus your microphone, or USB streaming 1-2 plus line in 1-2
sends the signal of the selected source directly to the main output, mixed with the standard
audio signal. This is similar to the talkover function, but without the attenuation.
FRANÇAIS
- Deck mode: 4 decks is the default setting (Decks A/C, B/D), which allows you to control 4
independent decks. In 4-deck mode, every control on each physical deck (transport buttons, jog
wheel, fader, knobs), and every control on the left or right channel mixer (volume fader, EQ and
Kill controls) can send 2 commands depending on the status of the virtual decks it controls.
You can also select 2-deck extended mode, in which Deck C and Deck D operate as shift
buttons which convert the buttons on the decks into new buttons, but have no impact on the
mixer area, on the jog wheels and on the Play, Cue and Stop buttons.
DEUTSCH
If you wish, you can also select 2-deck basic mode, in which only Deck A and Deck B are
enabled (only one function is assigned to each control).
NEDERLANDS
5.3.6.About tab
ITALIANOESPAÑOL
- This tab provides all of the information about the package, firmware, driver, MIDI mapping, DJ
API and control panel versions you are using. Please refer to this information when contacting
technical support.

20/30 – User Manual
6. OUTPUT OPTIONS
Two types of connectors are available for connecting speakers: RCA and 1/4" jack (6.35mm).
The RCA connectors are mono outputs, each of which corresponds to one channel (left = white,
and right = red). The 1/4" jack (6.35mm) connectors are also mono outputs.
Select the type of connector according to the type of equipment you will be connecting. Normally,
outputs 1-2 will be used for your live mix playing in the room, and outputs 3-4 will be used for
monitoring or connecting an external mixer.
6.1. Connecting speakers and/or an external mixer to your DJ
Console 4-Mx
With the included VirtualDJ software, you can play your mix for the audience over a hi-fi system
connected to outputs 1-2 on your DJ Console 4-Mx, for example, and preview upcoming songs on
outputs 3-4, using your headphones or monitoring speakers.
The included version of VirtualDJ is pre-configured to use the DJ Console 4-Mx’s built-
in sound card exclusively. As such, it will not be possible to use your computer’s standard
sound card or integrated speakers. A pair of speakers MUST be connected to Output 1-2 on
the back of your DJ Console 4-Mx.
- Make sure that your computer and other audio equipment is switched off.
- Connect your main set of speakers to the Output 1-2RCA plugs (plug 1corresponds to the left
speaker, plug 2to the right speaker) or to the Output 1-2 1/4" jack (6.35mm) plugs.
- The Output 3-4 RCA plugs play the same channels as those being played on the headphones,
and can be used to connect monitoring speakers (which are used by DJs in clubs, for example,
instead of headphones, when they are mixing in an enclosed DJ booth and separated from the
audience by a window); or, if you upgrade your software to VirtualDJ Pro, you can use the
Output 3-4 RCA plugs to connect an external mixer, and split up playback with Deck A played
on Output 1-2, and Deck B played on Output 3-4.
Your speakers and/or external mixer are now ready for use with your DJ Console 4-Mx.
6.2. Connecting headphones
Your DJ Console 4-Mx features 1 headphone connector, on the front panel. Headphones are set
to channels 3-4 by default, but can also be set to channels 1-2 instead (for more information,
please refer to chapter 5.3.5. Advanced tab). The console has been designed to function with DJ
headphones (stereo, impedance from 16 to 64 ohms).