HERO Qubo QBOOK User manual

The QBOOK

Contents1. Meet Qubo2. What's in the box?3. Let's take a closer look4. What will you need?5. Let's get started6. Choose an effective monitoring Position7. How to mount your Baby Cam?8. More than just a Baby Monitor9. Safety Guidelines10. Support

Tired of the sleepless nights? Missing your baby’s milestones? Concerned about your baby’s safety? Is your baby being looked after?Our baby monitor comes with the best-in-class Advanced Artificial Intelligence features. Remotely monitor your little one from anywhere at any time, no matter day or night. You can interact with your child using Two-Way Talk.Can’t hear the cries but have a hunch that your baby is crying? Don’t worry, with Baby Cry Alert, you will be notified instantly when your child is crying. The Qubo Baby Cam can also soothe your child when it detects crying by playing a lullaby or even a song recorded by you. Scared that your baby might roll off the bed when you are not in the room? With Virtual Cradle, the Qubo Baby Cam lets you create a safe zone around the baby and notifies you if the baby goes out of the zone. Can’t get enough pictures of your baby? Qubo Baby Cam records your child’s special moments through the day and creates a collage for your memories.MeetQUBO

1. Baby Cam2. Power Adapter3. Cable4. Deco Plate (Attached)5. Wall Anchors (2 units)6. Wall Screws (2 units)7. Deco Plate Screws (2 units)8. SD CardBOX?What's in the

Wall AnchorsDeco Plate ScrewsDeco PlateSD CardBaby CamWall ScrewsPowerAdapterCable

LED states and meaningRed LED blinking rapidlyRed LED continuousGreen LED continuousfor 5 seconds Green LED continuous
Device is ready
Ready for setup
Not connected to Wi-Fi 2-Way Talk begins

Let's takea closer
LOOK
Multicolour LED1Camera2Mic3Movable Hinge Joint4Stand5Deco Plate6Speaker 7Reset ButtonSD Card Slot

Power 110V - 240VWi-Fi Network2.4 GHz Wi-Fi (802.11 b/g/n) networkGreater than 2 Mbps network upload speediOS iOS 11 or higherAndroid Android 8.1 or higher What will you NEED?

Let's getSTARTEDStep 1Insert the SD Card into the SD Card slot.Step 2Connect the power cable that comes with the Baby Cam to a power source.Step 3Download the Qubo App.Step 4Create an account on the Qubo App and follow the instructions to get started.If you are an existing Qubo user, you can simply go to Add Device on the Qubo App.

Step 2Step 4Step 3Step 1It is highly recommended to set up the camera before mounting it.

Choose an effectivemonitoringPositionThe Baby Cam should be placed maximum 1 - 2 meters away from the baby.Keep it close to your babyMake sure the Baby Cam gets goodWi-Fi at the location it is installed to ensure you don’t miss any updates.Keep it in range of your routerMount itWe find that mounting the Baby Cam on a wall above the bed/crib, facing downwards, is the best way to monitor your child.

Step 1: Rotate the deco plate clockwise to expose the holes for the wall screws. The screw holes to fix the deco plate will also fall into place.Step 2: Fix the deco plate into the base of the Baby Cam using the deco plate screws provided in the box. The deco plate screws can only be screwed into the smaller holes; towards the center of the deco plate.Step 3: Fix the device on the wall using the wall screws. We recommend marking the spots where you intend to drill the holes. Use wall anchors (included) to hold the screws if you want to mount the device on hard surfaces suchas brick or stone.How to mount your Baby Cam?

Step 2Step 3Step 1

Baby Cry AlertQubo Baby Cam will notify you through the Qubo App when it detects continuous baby crying for more than 15 seconds. Presence of ambient noise could impact detection.Virtual CradleQubo Baby Cam allows you to create a safe zone around your baby through the Qubo App. It will notify you instantly if the little one moves out of that zone. DisclaimerBaby Cry Alert & Virtual Cradle are beta features. They work best when the device is installed 1 to 1.5 meters away from the baby, above the bed/crib facing downwards such that the camera gets a full view of the baby. Our endeavor is to keep adding new features to improve your experience. Our customer care team would love to hear your feedback on how we can make your experience better.More than just a Baby Monitor

• Do not immerse the device in any kind of liquid.• Do not attempt to dry the device using any external heat source, a microwave or a hair dryer.• Keep the device and all its components out of the reach of children and pets.• Clean the device with a dry soft cloth. Do not use any abrasives or harsh chemicals.• Do not expose the device to steam or extreme temperatures. • This device does not have an on/off button. Unplug the power adapter to turn off the device.• Only use the power adapter and cable included with the device. If the power adapter or cable appear to be damaged, stop using it immediately and contact Qubo Customer Care.• Do not plug multiple devices into the same wall socket.• Do not expose the device to temperatures below 0°C or above 40°C.• Install the device in accordance to the building and city code.• All Qubo products and services are meant for ages 18 and above.Safety GuidelinesWarning: Wires can be a hazard for the baby.Keep the cable provided in a box awayfrom children.