Hewlett Packard Enterprise Aruba 340 Series User guide

Aruba 340 Series Campus
Access Points
Startup Guide
Aruba 340 Series access points (AP-344 and AP-345) are
high-performance dual-radio wireless devices. These access points use
Multi-User Multiple-Input, Multiple-Output (MU-MIMO) technology to
provide secure wireless connectivity for both 2.4GHz 802.11 b/g/n and
5GHz 802.11a/n/ac Wi-Fi networks. The optional dual-5GHz radio
mode allows both radios to operate in the 5GHz radio mode
simultaneously, delivering true dual-5GHz performance. The 340
Series can be deployed in either a controller-based (ArubaOS) or
controllerless (InstantOS) network environment.
The two wired Ethernet ports located on the back of this access point
allow users to connect directly to the device when linked by an
Ethernet cable. The 340 Series can be attached to a 9/16" or 15/16”
ceiling rail using the provided mount adapters. Other mounting
options are supported by additional mount kits (sold
separately).
Package Contents
The following materials are included with this product:
Startup Guide (this document)
340 Series access point
9/16" and 15/16” ceiling rail mount adapters
Declaration of Conformity document
End-User License Agreement document
Inform your supplier if there are any incorrect, missing, or damaged
parts. To return this product, repack this unit and other included
materials into the original packaging before returning it to the
supplier.
Installation
This device must be professionally installed and serviced by a trained
Aruba-Certified Mobility Professional Certified Mobility Professional
(ACMP), or similar Aruba-certified technician.
To install this device, refer to the Aruba 340 Series Access Point
Installation Guide by scanning the QR code in this section, or visiting
www.arubanetworks.com/documentation, then select
Hardware Installation Guides > Access Points > 340 Series.
a Hewlett Packard
Enterprise company
Software
For instructions on initial setup and software configuration, refer to
the latest version of the AP Software Quick Start Guide by scanning
the QR code in this section, or visiting
www.arubanetworks.com/documentation, then select the
Software User & Reference Guides > Aruba Unified.
Regulatory Compliance
Aruba access points are classified as radio transmission devices, and
are subject to government regulations of the host country.
The network administrator(s) is/are responsible for ensuring that this
device operates in accordance with local/regional laws of the host
domain. Specifically, access points must use channel assignments
appropriate to the location in which the access point will be deployed.
For a complete list of approved devices for by your country domain,
refer to the Aruba Downloadable Regulatory Table Release Note by
scanning the QR code in this section, or visiting
http://www.arubanetworks.com/techdocs/DRT/Default.htm.
The regulatory model names for the 340 Series are:
AP-344: APIN0344
AP-345: APIN0345
Changes or modifications to this unit not expressly approved by the
party responsible for regulatory compliance can void the user’s
authority to operate this equipment.
FCC Statement
“Improper termination of access points installed in the United States
configured to a non-US model controller is a violation of the FCC grant
of equipment authorization. Any such willful or intentional violation
may result in a requirement by the FCC for immediate termination of
operation and may be subject to forfeiture (47 CFR 1.80).”
Canada
User manuals for license-exempt radio apparatus shall contain the
following text, or an equivalent notice that shall be displayed in a
conspicuous location, either in the user manual or on the device, or
both:
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference; and(2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
Cet appareil numerique de la classe B respecte toutes les exigencies
du Reglement sur le materiel brouilleur du Canada.
Déclaration d’Industrie Canada
Conformément aux réglementations d’Industrie Canada, cet

Contact Aruba
Copyright
© Copyright 2017 Hewlett Packard Enterprise Development LP
Open Source Code
This product includes code licensed under the GNU General Public
License, the GNU Lesser General Public License, and/or certain other
open source licenses.
A complete machine-readable copy of the source code corresponding
to such code is available upon request. This offer is valid to anyone in
receipt of this information and shall expire three years following the
date of the final distribution of this product version by Hewlett
Packard Enterprise Company.
To obtain such source code, send a check or money order in the
amount of US
$10.00 to:
Hewlett Packard Enterprise Company
Attn: General Counsel
3000 Hanover Street
Palo Alto, CA 94304
USA
Warranty
This hardware product is protected by an Aruba warranty. For more
details visit www.hpe.com/us/en/support.html
3333 Scott Boulevard
Santa Clara, California 95054
USA
Main Site http://www.arubanetworks.com
Support Site http://support.arubanetworks.com
Airheads Social Forums
and Knowledge Base http://community.arubanetworks.com/
North America Telephone [phone]
1-408-754-1200
International Telephone http://www.arubanetworks.com/
support-services/contact-support/
Software Licensing Site http://www.hpe.com/networking/
support
End-of-Life Information http://www.arubanetworks.com/
support-services/end-of-life/
Security Incident
Response Team (SIRT)
http://www.arubanetworks.com/
support-service/security-bulletins/
Email: [email protected]
a Hewlett Packard
Enterprise company
émetteur-récepteur radio doit être utilisé uniquement avec une
antenne dont le type et le gain maximal doivent être approuvés par
Industrie Canada. Pour réduire les interférences radio potentielles, le
type d’antenne et son gain doivent être choisis de façon à ce que la
puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas les
valeurs nécessaires à une communication efficace.
Ce périphérique est conforme aux règlements RSS exempts de licence
d’Industrie Canada. L’utilisation de ce périphérique est soumise aux
deux conditions suivantes : (1) ce périphérique ne doit pas provoquer
d’interférences, et (2) ce périphérique doit accepter toute interférence,
y compris les interférences susceptibles de provoquer un
dysfonctionnement.
European Union
The Declaration of Conformity made under RED Directive 2014/53/EU
is available for viewing at
www.arubanetworks.com/documentation, then navigate to the
Declarations of Conformity >Access Point folder, then select the
document that corresponds to your device’s model number as it is
indicated on the packaging of this product.
Wireless Channel Restrictions
5150-5250MHz band is limited to indoor only in the following
countries; Austria (AT), Belgium (BE), Bulgaria (BG), Croatia (HR),
Cyprus (CY), Czech Republic (CZ), Denmark (DK), Estonia (EE), Finland
(FI), France (FR), Germany (DE), Greece (GR), Hungary (HU), Iceland (IS),
Ireland (IE), Italy (IT), Latvia (LV), Liechtenstein (LI), Lithuania (LT),
Luxembourg (LU), Malta (MT), Netherlands (NL), Norway (NO), Poland
(PL), Portugal (PT), Romania (RO), Slovakia (SK), Slovenia (SL), Spain
(ES), Sweden (SE), Switzerland (CH), Turkey (TR), United Kingdom (UK).
For additional safety and regulatory information about this product,
refer to the Safety and Compliance Information
for Server, Storage, Power, Networking, and Rack Products document, by
scanning the QR code below or, visiting www.arubanetworks.com/
documentation, then select
Hardware Installation Guides > Access Points > Regulatory Safety
and Compliance Information.
Frequency Range MHz Max EIRP
2412-2472 20 dBm
5150-5250 23 dBm
5250-5350 23 dBm
5470-5725 30 dBm
5725-5850 N/A for EU