
Thank you for selecting LYNX 4S radio.
Lynx 4S, as Hitec’s new outstanding surface radio, is designed for all popular
R/C cars and boats which run by Radio Control System.
With various functions and easy-to-use interface, you can have more enjoyable and
safer R/C life through trusted Hitec’s Bi-directional radio control system,
AFHSS (Advanced Frequency Hopping Spread Spectrum).
Before using your LYNX 4S 2.4GHz system, read this manual carefully in order to
use your R/C set safely and keep it for your future usages.
Please note that Hitec reserves the right to make production changes during the
life of our product lines that may impact the information in this manual.
For the most up-to-date information on this and any other Hitec product,
visit our web site at www.hitecrcd.com
Instruction Manual
INTRO SET 1 SET 2 SYSTEM MODEL SD CARD
Do not operate R/C boats where the passenger boats are present or the lake & river where the lives exist.
Please note that Radio Control System can be interfered by jamming when high tension power lines,
a power transmission tower or power transmission site are near.
Minors who are under 19 years old need parental guidance to control this item.
Also, we recommend beginners to get helps from experts or R/C shop near.
Do not store your R/C system in the places where it is extremely hot(over 40°C/104°F) or cold(under 10°/50°F),
where it is exposed to direct sunlight and where it is surrounded by too many vibrations or dusts.
Always ensure if everything works fine and setting for your model is well customized before running the model,
even if the set-up is already done.
Always check the throttle trigger on the transmitter to be sure it is at the neutral position when turning on the
transmitter power switch and also make sure the engine is not running or the motor is stopped when turning off
the transmitter power switch.
Please turn on the transmitter power switch first and then turn on the receiver or speed control power switch
in order. In case of turning off, please make sure to turn off the receiver and speed control power switch first and
then turn off the transmitter power switch in order. If the power switches are turned off in the opposite order,
the model may unexpectedly run out of control and cause a very dangerous situation.
In any cases, please set up the fail safe function. The fail safe function is a safety feature that minimizes set
damage by moving the servos to a preset position when reception fails.
When the model is not being used, always remove or disconnect the battery.
Leaving the battery connected could create a dangerous situation if someone accidentally turns on the
receiver power switch. Loss of control could occur.
Do not heat, drop the battery or expose it to strong shocks or vibrations.
It could be exploded and cause burns and chemical damage.
Do not leave the radio system or models within the reach of small children.
A small child may accidentally operate the system. This could cause a dangerous situation and injuries.
Also, small child could accidently swallow small parts and get hurt
Electrolyte to leak from the cells (Ni-MH) could cause skin burns, loss of sight, and other injuries.
When exposed by electrolyte, please wash off immediately and visit the doctor for proper action.
Always use only genuine transmitters, receivers, servos, ESCs (electronic speed controls),
Ni-MH/Ni-Cd batteries and other optional accessories. We will not be responsible for problems caused by the
use of other than our genuine parts. Use the parts specified in the instruction manual and catalog.
When exposed by fuel, motor spray, waste oil or exhaust, please wash it by a dry cloth. More severe case,
please use a drained soft cloth after washing with water or a neutral detergent.
Do not use Cleaner or Alcohol to clean up as those can damage the surface.
Receiver is the precision machinery. Do not expose it by strong vibrations, shocks or dusts.
Please use proper measures from this kind of riskiness.
54
Please read the ENTIRE safety precaution below for your safety as well as that of others before operation.
Do not operate under rainy day. Any types of moisture on the components can cause the
malfunction or loss of control that result unexpected accidents.
Do not operate when you cannot secure a clear view. With poor visibility,
you may unexpectedly lose control of your model and create a dangerous situation.
Do not operate your model near spectators, parking area or any other area that could result in
injury to people or damage of property.
Introduction
SAFETY PRECAUTION
• Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
European CE notice to users and product statements
- Frequency Range : 2409.2 MHz ~ 2474.0 MHz
- Maximum RF Output power : 100mW
- Hereby, HITEC RCD INC, declares that our (RE type : LYNX 4S) is in compliance with RED 2014/53/EU.
The full text of the EU DoC is available at the following internet address: www.multiplex-rc.de
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions;
(1) this device may not cause harmful interference, and
(2) this d
evice must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.