
OPERATING THE AUDI LOOK ALIKE
KEYCHAIN
IMPORTANT NOTICE: Allow your device
to charge 4 – 6 hours efore using.
HOW TO CHARGE THE AUDI LOOK ALIKE
KEYCHAIN
1. Plug the USB cable into your PC.
2. Plug the USB cable into the keychain's USB
port.
3. The red and red and blue indicator lights
will alternate flashing while the device is
charging.
HOW TO TURN THE DEVICE ON
1. Push and hold the On / Off Button for
2 seconds.
2. The indicator light will be red, red and
blue, and then red again.
3. The solid red indicator light means the
keychain is now in standby m de.
HOW TO TURN THE DEVICE OFF
1. Push and hold the On / Off Button for
2 seconds.
2. The indicator light will flash red and
blue 3 times and then turn off.
3. The device is now turned off.
HOW TO USE VIDEO RECORDING
1. Turn on the device so that it is in
standby m de.
2. Push and hold the Camera / Video
Button.
• The red indicator light will flash
5 times.
3. You can now release the Camera /
Video Button.
4. The keychain is now recording live
video.
5. To stop recording, simply turn off the
device.
HOW TO USE THE PHOTO CAMERA
1. Turn on the device so that it is in
standby m de.
2. Push — without holding — the Camera
/ Video Button.
3. The red indicator light will blink once
each time you push the Camera
button.
4. The keychain has taken a photograph.
HOW TO USE MOTION DETECTION
1. Turn on the device so that it is in
standby m de.
2. Push and hold the Motion Detect
Button.
• The red and blue indicator light
will flash 6 times.
3. The camera will not record live video
until motion is detection.
4. When motion is detected, the blue
indicator light will blink once.
5. The device will record video for 3
minutes.
• f motion is still being detected
at the end of 3 minutes, the
camera will begin recording
another 3 minutes of video.
• f no further motion is
detected, the device will enter
standby mode until motion is
again detected.
6. To stop motion detection, simply turn
off the device.
HOW TO RESET THE TIME AND DATE STAMP
1. Connect the device to your PC using
the USB Cable
2. Go to
http://www.mgidownloads.com/
3. Click on "WriteTime.exe"
4. Click "Save File"
IMPORTANT NOTICE: You might receive
a warning that this programs contains
a virus. Disregard this warning. The
program is safe to use.
5. Go to Start > Computer > Downloads >
Open WriteTime.exe