Hieha WiFi900Pro Mounting instructions

Model：WiFi900Pro
Trail
Camera
Hieha
ua
WiFi + APP Bluetooth 30FPS 30MP H.265
Use Manual

TABLE OF
CONTENTS
English
Deutsche
Français
Italiano
Español
日本語
1-16
17-32
33-48
49-64
65-80
81-96
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
----------------------------------------------------------------------------
--------------------------------------------------------------------------------
------------------------------------------------------------------------------
---------------------------------------------------------------------------

-1-
Me or
Night
Day
GETTING START
English

-2-English

-3-
English
-3-

-4-
EXTERNALPOWERSUPPLY
Use 12V DC Power source (Not included)
OPERATING BUTTON
MENU Menu button-Menu setting
Shutter button--Start/End video recording or photo taking
Up button-- Video recording mode
Down button--Photo mode
Right button--Enter secondary menu
Left button--Start/stop playing video
OK/WiFi button--OK, ON/OFF WiFi
REPLAY
English

-5-
Setup Sub Menu Description
Mode Camera,video,camera
＆video,Timelapse
Picture,video,picture
and video,taking piture
regular
Resolution 4K,2K, 1080P, 720P,
WVGA(480P) Video Resolution
Video Length 5/10/30/60/90
Seconds
Each Video max 90 sec,
default 10sec
Record Audio On / Off Video With Sound
SETUP MENU
English

-6-
Setup Sub Menu Description
Image Size Image resolution
Interval Max 30 minutes delay
Time Lapse 5/30/60/120 minutes Take pic every 5min
Sequcence 1/3/6/9 pictures Max 9 pics one shot
ISO Auto/100/200/400 Exposure level
Over write On / Off Cycle Recording
PIR Sensitivity High/Medium/Low Adjust PIR sensitivity
Language
Frequency Screen refresh rate
Camera ID 6 numbers or letters
Password On / Off 4 numbers
Working Timer 00:00:00 to 23:59:59 N/L
Date / Time DD/MM/YY N/L
Format OK / Cancel Format memory card
Default Setting OK / Cancel Back to default
CAM000
Change language
30MP/24MP/20MP/16MP/
12MP
1/10sec,1/3/5/10/15/30min
EN/FR/DE/IT/ES/POR/
HRV/DAN/SVE/SUO/POL
/PYC
50HZ / 60HZ
English

-7-
English
System settings
1.Power on and off /System settings
2.Camera mode setting
A. After putting the battery in, push the mode from "OFF" to "TEST" to startup,
and then you can set the function.
B. Short press the MENU button to set functions of “mode, resolution, video
length, record audio”. Short press the “OK” or “Right” button to enter the
secondary menu. After entering the secondary menu, short press the “OK”
button to save the settings, or press left to return to the previous interface.
C. Switch to the ON for monitoring mode: each function output will be executed
when the setting is pushed to the ON position in each mode of photo, video,
photo+video.
D. Switch to "OFF" to shut down, the screen can not display anything.
The camera has 4 modes: Camera mode, Video mode, Photo + Video mode，
Time Lapse Mode.
3.Video length
Set the length of the video: 5s/10s/30s/60s/90s.The longer the recording time is
selected, the less the remaining recording time is.
c)Photo + video mode:
In this mode, the camera takes pictures first then records videos.
b)Video mode:
The video resolution settings: 4K/2K/1080P/720P/VGA(480P)
a)Camera mode:
The photo resolution settings: 30MP/24MP/20MP/16MP/12MP.

-8-English
B. Short press the MENU button to set functions of “mode, resolution, video
length, record audio”. Short press the “OK” or “Right” button to enter the
secondary menu. After entering the secondary menu, short press the “OK”
button to save the settings, or press left to return to the previous interface.
4.Audio recording
You can choose to turn it on or off, the video has sound when it is on, and the
video has no sound when it is off.
5.Interval
Set the camera timing interval for each recording in the monitoring mode:
1s/10s/1min/3min/5min/10min/15min/30min
6.Time Lapse
Set time lapse mode: 5min/30min/1h/2h/3h/6h/12h/24h
7.Sequence
Continuous photo taking functions: 1/3/6/9
Press SHUTTER button to return to camera mode.
8. PIR sensitivity
The sensitivity of the sensor should be set to "high sensitivity" when the indoor
environment is less impacted. "Medium sensitivity" should be selected when the
outdoor environment is impacted; "Low sensitivity" should be selected when the
external environment is largely impacted, and it is suitable for cold environments.
9.Playback mode
Take down the hunting camera from the position of installation, set the switch
from "ON" to "SETUP", press the RIGHT button to switch to playback mode,
press UP/DOWN to view the videos and pictures captured, press LEFT button
to play video, press again LEFT button to stop playing video, and press RIGHT
button to return to playback mode.
To delete the current and all: press MENU to enter the delete menu to delete the
selected pictures or videos in the camera memory card, select "Delete current" or "
delete all", press OK to confirm, and press MENU to return to the previous menu in
the settings process.

-9-English
Description of Operating mode
1. Normal operation mode
In this mode, the camera is triggered by the sensor and enters the life mode when
the switch is on. After 10 seconds, the LED lights will be off and the camera will
start to operate independently and enter the standby mode. Once an animal enters
the detection area and is detected by the auxiliary sensor, the camera will be
activated and detect the motion track. If the object continues to move to the
detection area detected by the main sensor, the camera will automatically take
pictures and video. If the animal leaves the area detected by the sensor, the
camera will turn off and return to standby mode.
2. Night mode
At night, the infrared LED light will turn on automatically to provide necessary
lighting for taking photos. The LED light will illuminate objects with a range of
about 3-30 meters. If the objects are too close to the camera, it may cause
overexposure.
In the night mode, the shot image can only display black or white. When recording
video for a long time, low voltage may have a great impact on the stability of the
machine, so do not record video at night when the power is low.
Note: The camera is used at night. When the battery voltage is low, the current
will increase due to the infrared light emitting. Low-voltage operation may have
a great impact on the stability of the machine. The camera cannot take
pictures/videos or capture very dark images. , But does not affect daytime
photography or video recording.

-10 -
English
Technical Parameters
Product name
Photo resolution
Video resolution
Video format
Picture format
Menu language
SD card
Screen
Power supply
External power jack
Battery
Flash Range
APP
Working temperature
Storage temperature
Camera weight
Size
Trail camera
30MP/24MP/20MP/16MP/12MP
4K/2K/1080P/720P/VGA(480P)
H.265./ MP4
.JPG
English, German, French, Italian, Spanish,
Portuguese, Hrvatski and Danish
SD card support up to 256GB
2.0’’ TFT
External DC power supply (dc-6V/1A)
3.5x1.3mm
8X1.5AA battery
<98ft
WiFiCameraSum(iOS), WiFiCamera(Android)
-20℃to +70℃
-20℃to +70℃
about 300g
150x100x60mm

INSTALLATION
-11 -English

Step 3
①Slide the mode switch
form OFF to TEST to activate
the camera and view the user
setup screen.
②And then slide the mode switch form TEST to ON.
③The camera will start working after 10 seconds countdown,
meanwhile the red indicator light will blink.
Step 2
Insert Micro SD(Not included) memory card to
Trail Camera.
-12-English

or
Step 5
Step 4
Scan the QR codes below search for“WiFiCameraSum” on the Apple appstore
search for “WiFiCamera” on the Google Play to download the app.
IOS Android
Open the APP on your cellphone
and tap “Search Device”
at the left lower corner
select “GCBT40” and then tap “Connect” to connect
your phone and camera with Bluetooth.
You can see the camera flashing yellow light one
time and then flashing blue light.
or
1
2
-13 -English

-14 -
English
Step 7
Back to the main page of app and then tap “Live video”.
Go to WiFi setting on your phone, select “CAM_XXXXXXXXXXXX”
Enter password “12345678”.
(WiFi name and password can be changed in the APP when connected)
1
2
3
Note: The WiFi will automatically disconnected after 3 minutes if no operation
is performed on the APP.

In Thebox
Camera
Mounting Strap
Manual
Card reader
-15 -English
Support 64GB SD Card

Q: What is the range of WiFi and Bluetooth?
Q: How close do i need to be to turn the wifi on using the bluetooth?
Q: Does it have a connection to be wired for 9vdc or 12vdc instead of battery?
Q: Can you connect to your in-home WiFi and the internet provided the camera
Q: Is the app available for iPhone?
TROUBLESHOOTING
A: The range of camera WiFi is about 98Ft at forest or indoor and 328Ft at
open space. The range of camera Bluetooth is between 16 to 26 Ft.
A: The maximum distance of the camera's Bluetooth switch is 5 meters
A: Yes, you can use 9vdc for this camera, there is a power connector in the
box, dedicated to the external power supply.
Recommend using 8*1.5V AA batteries in this trail camera to obtain maximum
battery life.( NOT INCLUDED )
A: Yes, you can change different WiFi name and your own password by app on
phone.
A: WiFi900 Bluetooth trail camera connects with the phone's WiFi, not in-
home WiFi/Internet. Download the APP on your phone and then connect with
WiFi. You can adjust the setting and check the photo /video on the phone
directly.
A: Yes, Trail Camera use "WiFiCameraSum" APP for Apple Store
and “WiFiCamera” APP for Google Play, it's available for Android and IOS
system phone.
-16 -English
Q:Can I change WiFi name and password?