High End Systems DL.2 User manual

DL.2 Digital Light
User Manual
© High End Systems, Inc. 2005, All Rights Reserved
Information and specifications in this document are subject to change without notice. High End Systems, Inc.
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.
Trademarks used in this text: High End Systems, WholeHog III, Catalyst, the Catalyst Logo, and LithoPatterns
are registered trademarks; and Hog iPC, the High End Systems globe logo and the Hog logo are trademarks of
High End Systems, Inc. or High End Systems Europe Ltd. Belden is a registered trademark of Belden, Inc.
Microsoft, DirectX, and Windows are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries. Super HAD and Sony are registered trademarks or trademarks of
Sony Corporation in the United States and/or other countries. Art-Net is a registered trademark of Artistic
License Corporation. Lightwave 3-D is a registered trademark of Newtek. Mac OS is a trademark of Apple
Computer, Inc. registered in the U.S. and in other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. High End Systems disclaims any proprietary interest in trademarks and
trade names owned by others.
DL.2 User Manual
P/N 60600245
June, 2006

ii DL.2 User Manual
Contacting High End Systems®
Sales Department High End Systems, Inc.
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 512.836.2242
fax: [phone]
Toll Free: 800.890.8989
Customer Service High End Systems, Inc.
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 800.890.8989
fax: [phone]
toll free: 800.890.8989
email: [e-mail]
World Wide Web: http://www.highend.com

DL.2 User Manual iii
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45104
Manufacturer’s name: High End Systems, Inc.
Distributor’s name: High End Systems, Inc.
Distributor’s address: 2105 Gracy Farms Lane
Austin, Texas 78758 USA
Declares that the product
Product Name: DL.2
Product Number: All
Product Options: All
conforms to the following EEC directives:
73/23/EEC, as amended by 93/68/EEC
89/336/EEC, as amended by 92/31/EEC and 93/68/EEC
Equipment referred to in this declaration of conformity was first manufactured in compliance
with the following standards in 2005:
Safety: EN 60598-1: 1997
EN 60598-2-17; 1990
A1-A3: 1998
A13: 1999
EMC:
EN 55022 Conducted Emissions Class A
Radiated Emissions Class A
ANSI C63.4 Class A
FCC 47 CFR Part 15 Class A
VCCI V-1/2001.04 Class A
EN 55024 EN 61000-4-2 4/8kV
EN 61000-4-3 A1 3V/m
EN 61000-4-4 1kV/0.5kV
EN 61000-4-5 2kV/1kV
EN 61000-4-6 3 Vrms
EN 61000-4-11 >95%-0.5p, 30%-25p,>95%-250p
EN 61000-3-2 Class A
EN 61000-3-3
USA, Monday, June 26, 2006
Kenneth Stuart Hansen, Compliance Engineer

iv DL.2 User Manual
Product Modification Warning
High End Systems products are designed and manufactured to meet the requirements of United States and
International safety regulations. Modifications to the product could affect safety and render the product non-
compliant to relevant safety standards.
Mise En Garde Contre La Modification Du Produit
Les produits High End Systems sont conçus et fabriqués conformément aux exigences des règlements
internationaux de sécurité. Toute modification du produit peut entraîner sa non conformité aux normes de
sécurité en vigueur.
Produktmodifikationswarnung
Design und Herstellung von High End Systems entsprechen den Anforderungen der U.S. Amerikanischen und
internationalen Sicherheitsvorschriften. Abänderungen dieses Produktes können dessen Sicherheit
beeinträchtigen und unter Umständen gegen die diesbezüglichen Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto
I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i requisiti delle normative di
sicurezza statunitensi ed internazionali. Qualsiasi modifica al prodotto potrebbe pregiudicare la sicurezza e
rendere il prodotto non conforme agli standard di sicurezza pertinenti.
Advertencia De Modificación Del Producto
Los productos de High End Systems están diseñados y fabricados para cumplir los requisitos de las
reglamentaciones de seguridad de los Estados Unidos e internacionales. Las modificaciones al producto
podrían afectar la seguridad y dejar al producto fuera de conformidad con las normas de seguridad
relevantes.
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
Important Safety Information
Instructions pertaining to continued protection against fire, electric shock, and injury to persons are found in
Appendix E. Please read all instructions prior to assembling, mounting, and operating this equipment.
Important: Informations De Sécurité
Les instructions se rapportant à la protection permanente contre les incendies, l’électrocution, excessif et aux
blessures corporelles se trouvent dans l’Annexe E. Veuillez lire toutes les instructions avant d’assembler, de
monter ou d’utiliser cet équipement.
Wichtige Sicherheitshinweise
Sicherheitsanleitungen zum Schutz gegen Feuer, elektrischen Schlag, und Verletzung von Personen finden Sie
in Anhang E. Vor der Montage, dem Zusammenbau und der Intbetriebnahme dieses Geräts alle Anleitungen
sorgfältig durchlesen.
Informazioni Importanti Di Sicurezza
Le istruzioni sulla protezione da incendi, folgorazione, e infortuni sono contenute nell’appendice E. Si prega di
leggere tutte le istruzioni prima di assemblare, montare e azionare l’apparecchiatura.
Informacion Importante De Seguridad
En el Apéndice Ese encuentran instrucciones sobre protección continua contra incendios, descarga eléctrica, y
lesiones personales. Lea, por favor, todas las instrucciones antes del ensamblaje, montaje y operación de este
equipo.

DL.2 User Manual v
Symbols
The following international caution and warning symbols appear in margins throughout this manual to
highlight messages.
Fog Machine Warning
Like all high quality video projection units, the DL.2 fixture must be kept protected from excessive amounts of
glycol fog, mineral oil, and smoke. The DL.2 fixture incorporates two-stage air filtering to reduce these risks to
a minimum; however, the user must follow these guidelines to ensure continued operation of the fixture:
• Air filters (both fixture and projector) should be checked and cleaned on a regular basis. When used in
a closed or fixed environment where fog or haze is used, we recommend at least a weekly check.
• Do not situate DL.2 fixtures in areas of high fog density such as directly in front of a fog machine or
mineral oil hazer.
• Minimize the exposure of DL.2 fixtures to both glycol fog and mineral oil.
The DL.2 fixture is a highly complex and sensitive electro-optical device and care and thought in how it is
used, rigged, and positioned will maximize the product’s life and your investment.
Failure to follow these guidelines and carry out regular maintenance will void the warranty.
Packaged Media Notice:
Any use of this product other than consumer personal use in any manner that complies with the
MPEG-2 Standard for encoding video information for packaged media is expressly prohibited
without a license under applicable patents in the MPEG-2 patent portfolio, which license is
available from MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver Colorado 80206.
Warranty Information
Limited Warranty
Unless otherwise stated, your product (excluding the lamp) is covered by a one year parts and labor limited
warranty. The lamp warranty for Christie projectors is 120 days or 500 hours whatever comes first. It is the
owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and dealer or
distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty
period.
CAUTION: This symbol appears adjacent to Caution
messages. Not heeding these messages could result in
personal injury and/or damage to equipment.
WARNING: This symbol appears adjacent to high
voltage warning messages. Not heeding these
messages could result in serious personal injury.
This symbol indicates the minimum focus distance
from a combustible object.
This symbol cautions against mounting the fixture on a
flammable surface.
This symbol indicates that, while operating, equipment
surfaces may reach very high temperatures. Allow the
fixture to cool before handling.

vi DL.2 User Manual
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Material Authorization (RMA) number from your dealer or point of purchase
BEFORE any units are returned for repair. The manufacturer will make the final determination as to whether or
not the unit is covered by warranty.
Any Product unit or parts returned to High End Systems must be packaged in a suitable manner to ensure the
protection of such Product unit or parts, and such package shall be clearly and prominently marked to indicate
that the package contains returned Product units or parts and with an RMA number. Accompany all returned
Product units or parts with a written explanation of the alleged problem or malfunction. Ship returned Product
units or parts to: 2105 Gracy Farms Lane, Austin, TX 78758 USA.
Note: Freight Damage Claims are invalid for fixtures shipped in non-factory boxes and packing materials.
Freight
All shipping will be paid by the purchaser. Items under warranty shall have return shipping paid by the
manufacturer only in the Continental United States. Under no circumstances will freight collect shipments be
accepted. Prepaid shipping does not include rush expediting such as air freight. Air freight can be sent
customer collect in the continental United States.
REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER OTHER THAN THE LIMITED WARRANTY STATED ABOVE. HIGH END SYSTEMS, INC. MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PRODUCT, AND HIGH END SPECIFICALLY
DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. HIGH END
SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST
PROFITS, SUSTAINED OR INCURRED IN CONNECTION WITH ANY PRODUCT OR CAUSED BY PRODUCT
DEFECTS OR THE PARTIAL OR TOTAL FAILURE OF ANY PRODUCT REGARDLESS OF THE FORM OF ACTION,
WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND
WHETHER OR NOT SUCH DAMAGE WAS FORESEEN OR UNFORESEEN.
Warranty is void if the product is misused, damaged, modified in any way, or for unauthorized repairs or
parts. This warranty gives you specific legal rights, and you may also have other rights specific to your
locality.
Patents
This product is protected by one or more patents including: US 4,392,187; US 4,602,321; US 4,688,161;
US 4,701,833; US 4,709,311; US 4,779,176; US 4,800,474; US 4,962,687; US 4,972,306; US 4,980,806;
US 5,010,459; US 5,031,078; US 5,073,847; US 5,078,039; US 5,186,536; US 5,209,560; US 5,278,742;
US 5,282,121; US5,307,295; US 5,329,431; US 5,331,822; US 5,367,444; US 5,402,326;US 5,430,629;
US 5,432,691; US 5,454,477; US 5,455,748; US 5,506,762; US 5,515,254; US 5,537,303; US5,545,951;
US 5,580,164; US 5,590,954; US 5,590,955; US 5,640,061; US 5,647,662; US5,665,305; US 5,691,886;
US 5,728,994; US 5,758,955; US 5,758,956; US 5,769,527; US5,774,273; US 5,798,619; US 5,806,951;
US 5,823,661; US 5,825,548; US5,828,485; US 5,829,868; US 5,857,768; US 5,882,107; US 5,934,794;
US 5,940,204; US 5,945,786; US5,953,152; US 5,980,066; US 6,048,080; US 6,327,103; US 6,048,081;
US 6,057,958; US6,054,816; US 6,126,288; US 6,142,652; US 6,172,822; US 6,188,933;US 6,208,087;
US 6,219,093; US 6,220,730; US 6,241,366; US 6,255,787; US 6,256,136; US 6,278,542; US6,288,828;
US 6,327,103; US 6,421,165; US 6,430,934; US 6,466,357; US 6,502,961; USD347,113; US D350,408;
US D359,574; US D360,404; US D365,165; US D366,712; US D370,080; US D372,550; US D377,338;
US D381,740; US D409,771; US 6693392; US 6719433; EP 0662275; EP 0767398; DE 621495; DE 655144;
DE 797503; EP 0475082; GB 2 043 769 B; GB 2 055 842 B; GB 2 283 808 B; GB 2 290 134 B; GB 2 291 814 B;
GB 2 292 530 B; GB 2 292 896 B; GB 2 294 909 B; GB 2 295 058 B; GB 2 303 203 B; GB 2 306 887 B;
GB 2 307 036 B; GB 2 316 477 B; MR0862-1996; M9,604,224.9.

DL.2 User Manual vii
What You Should Know About Copyright
The following FAQ can help you understand copyright laws and how they apply to content used
with the DL.2 fixture
By Suzy Vaughan Associates for High End Systems.
I want to use a film clip from “When Harry Met Sally” in a promotional piece advertising my
services. What do I have to do to be able to do that?
First of all, you need to obtain permission to use the clip from its owners. The clip is considered intellectual
property, just as though it were your car or some software code developed by and belonging to Microsoft. This
is because the U.S. Copyright Act gave creators of literary works (which include books, films, television
programs, art works, still photos and musical compositions and recordings) the right to sell or license these
works and to make money from them for the period of the copyright.
But what about public domain material? I heard that lots of material is in the public domain and
can be used for free.
Once the copyright runs out, the creative work falls into the public domain and can be used freely by anyone
without payment or licensing. If the work is not public domain, it is considered literary property. The
Copyright Act provides substantial penalties for copyright infringement ranging from $10,000 for accidental
infringement to $250,000 for willful infringement. However, contrary to popular belief, there really is not that
much material in the public domain so this approach will limit you creatively.
What if I want to use a clip in a public performance? It's not being filmed or taped. Surely I don't
need permission for that?
Public gatherings require clearance whenever copyrighted data is projected to audiences, or for any use other
than just personal viewing. Concerts, trade shows, industrial shows, parties and raves are all examples of
public performance and permission must be obtained.
Suppose I want to use a still photo or a magazine cover or a television clip? Do I have to obtain
permission for them too?
Yes, they are also copyrighted works, whose owners must grant a license for their usage.
Do I need any other permissions to use this material?
In many cases you do. You may need to obtain permission to use the appearance of actors who appear in the
clip as well as pay the writers and directors of the film that your clip comes from.
What about music? I hear you can use 8 bars for free.
8 bars for free is a fallacy that has been passed around as a fact for a long period of time. However, it isn't
true. Both musical compositions and records require licensing and payment.
What about High End Systems material included with the DL.2 fixture? Do I have to clear that?
No. High End Systems has worked to provide clearance for the content that is provided with the DL.2 fixture.
Any materials you received directly from HES with the purchase of a new DL.2 fixture have already been
properly licensed for your use in shows and presentations. That does not, however, license you to sell this
content separately from DL.2 fixture. Also, please be sure that any new content you obtain from outside
sources is properly cleared for public presentation.
This sounds really difficult and I don't know how to do it? What do I do to properly license
copyrighted material?
You need to consult with a Content Clearing House or with a properly licensed Intellectual Property Attorney.
Content clearinghouses are typically less expensive to work with and have well established industry relations
that can result in cost savings. High End Systems uses and highly recommends Suzy Vaughan Associates.
Suzy Vaughan Associates has 20 years of experience in clearing clips, talent, and music for use in any number
of venues. Their clients include Barbara Streisand, Michael Jackson, and The Emmys among other shows.

viii DL.2 User Manual
You can obtain more information about Suzy Vaughan Associates' services by calling 818-988-5599 or
emailing [email protected]. Their website is www.suzyvaughan.com. Suzy Vaughan is also an attorney
specializing in intellectual property issues.
How much does it typically cost to license copyrighted material?
The answer depends entirely on what material you want to use and how you plan to use it. Prices can range
from hundreds of dollars for photography content to thousands of dollars for a highly desirable film/video clip.
Since price is content-sensitive, the best thing to do is to contact a clearinghouse like Suzy Vaughan
Associates and let them find out for you.

DL.2 User Manual ix
Table of Contents
User Manual ...................................................................................................i
Contacting High End Systems® ...................................................................... ii
Declaration of Conformity ............................................................................. iii
Product Modification Warning ........................................................................ iv
FCC Information .......................................................................................... iv
Important Safety Information ........................................................................ iv
Symbols ......................................................................................................v
Fog Machine Warning ....................................................................................v
Packaged Media Notice: .................................................................................v
Warranty Information ....................................................................................v
Patents ...................................................................................................... vi
What You Should Know About Copyright .........................................................vii
Chapter 1: Product Overview
This chapter describes the features and specifications of the DL.2 fixture and
the Content Management Application software.
Features ........................................................................................................1
System .......................................................................................................1
Graphics Engine ...........................................................................................2
Content Management Application ....................................................................2
Hardware ....................................................................................................2
Related Products and Optional Accessories ...................................................3
Chapter 2: Setup and Configuration
Hardware setup includes mounting, connecting to power and Ethernet and DMX
linking. Software setup includes launching the Content Management
Application (CMA) and configuration options.
Hardware Setup ............................................................................................5
Unpacking the Fixture ...................................................................................5
Pan and Tilt Locking ......................................................................................5
Attaching a Power Cord Cap ...........................................................................6
Installing a Line Cord Cap - U.K. Only ..........................................................6
Vatic Fitter Heads Information - Danmark .....................................................6
Back Panel Connections .................................................................................6
Mounting the Fixture .....................................................................................8
Fog Machine Warning .................................................................................8
Mounting the Fixture Upright .......................................................................9
Truss Mounting .........................................................................................9

xDL.2 User Manual
Linking DL.2 Fixtures .................................................................................. 10
Setting up a Standard DMX Link ................................................................ 10
Setting up an Ethernet Fixture Link ............................................................ 11
Linking Configurations .............................................................................. 11
Powering On the Fixture .............................................................................. 12
Homing the Fixture .................................................................................. 12
Viewing the Display Panel ......................................................................... 13
Software Setup ...........................................................................................14
Verifying and Uploading Fixture Software ....................................................... 14
Installing and Launching the Content Management Application (CMA) ................ 14
Configuring DL.2 Fixtures ............................................................................ 15
Setup Configuration Using the Menu System ............................................... 15
Setup Configuration Using the CMA ............................................................ 16
Shutting Down the Fixture .......................................................................... 17
Recommended Shutdown Options ................................................................. 17
Placing Fixture in Road Case ........................................................................ 17
Chapter 3: The DL.2 Menu System
You can use the DL.2 fixture’s Menu System to configure the fixture, review
diagnostic feedback, and view content information.
Menu Panel Components .............................................................................19
LCD Display Adjustment Buttons .................................................................. 20
LCD Display Power Button ........................................................................ 20
LCD Display Menu Options and Selection .................................................... 20
Navigating the Menu ................................................................................... 21
DL.2 Menu Options ...................................................................................... 22
Menu Screen Descriptions ........................................................................... 25
DMX Tab .................................................................................................. 25
DMX_Control Screen ................................................................................ 25
DMX_Protocol Tab ................................................................................... 26
DMX_Protocol_Motion Screen .................................................................... 26
DMX_Protocol _Global Screen ................................................................... 26
DMX_Protocol _Obj Screens ...................................................................... 26
DMX_Raw Screen .................................................................................... 27
Set Tab ..................................................................................................... 28
Set_Fixture Screen .................................................................................. 28
Set_Projector Screen ............................................................................... 29
File Screen ................................................................................................ 30
Test Tab .................................................................................................... 31
Test_Home Screen .................................................................................. 31
Test_Self Test Screen .............................................................................. 31

DL.2 User Manual xi
Info Tab .................................................................................................... 32
Info_Hours ............................................................................................. 32
Info_Version Screen ................................................................................ 32
Info_Status Tab ...................................................................................... 32
Reset Screen ............................................................................................. 33
Chapter 4: DMX Programming Basics
If you are new to DMX programing, this chapter will give you a brief overview
and tips on programming DL.2 fixtures with Wholehog consoles from High End
Systems.
DMX Programming Overview ......................................................................35
DMX512 Links ............................................................................................ 35
Determining a DMX Start Channel ................................................................. 35
8-bit vs. 16-bit DMX Parameters ................................................................... 35
Lighting Consoles ........................................................................................36
Fixture Libraries: ........................................................................................ 36
Using DL.2 Servers with a WholeHog Console .............................................36
Adding a Fixture ......................................................................................... 36
DMX Output Displays .................................................................................. 36
16-bit DMX ................................................................................................ 37
Wholehog III Programming Notes ..............................................................37
Play Speed ................................................................................................ 37
Mask Strobe .............................................................................................. 37
Play Modes (Opacity) .................................................................................. 37
CMY .......................................................................................................... 37
Control Channel Functions ........................................................................... 37
Chapter 5: Graphics Engine Overview
The DL.2 fixture’s graphic engine software gives you control over content
selection, playback, 3-D environment you will use to select, image and project
3-D Video Lighting Content.
Working in the DL.2 3-D Environment .........................................................39
Image Optimizing Controls .........................................................................39
Graphics Control Hierarchy .........................................................................39
Graphic Engine Function Flow ....................................................................... 40
Graphics Engine Functions ..........................................................................41
Object Graphic Functions ............................................................................. 41
Global Functions ......................................................................................... 41
Making Graphics Effect Choices ...................................................................41

xii DL.2 User Manual
Chapter 6: Graphic Functions: Defining Content
Each Graphic Object’s content is composed of a 3-D object overlaid with a
media file. This chapter outlines how to select an image’s object and media file
components as well as define the video segment and its playback.
Selecting Content ........................................................................................43
How Content is Organized ............................................................................ 43
Selecting Content ....................................................................................... 43
Content Selection Parameters ..................................................................... 44
Object ....................................................................................................... 44
Media Folder .............................................................................................. 45
Media Folder Descriptions ......................................................................... 46
Media File .................................................................................................. 47
Defining a Media File Segment .................................................................... 47
In Frame and Out Frame Parameters ............................................................ 47
Segment Selection Examples ....................................................................... 48
Defining Playback .......................................................................................48
Playback Mode ........................................................................................... 48
Playback Speed .......................................................................................... 49
Chapter 7: Graphic Functions: Rotation, Position, Scale
You can independently control each Graphic Object’s rotation direction and
speed; along with it’s position and scale in x, y, and z axis directions.
Rotating a 3-D Object ................................................................................. 51
Rotation Parameters ...................................................................................53
X Rotation ................................................................................................. 53
Y Rotation ................................................................................................. 54
Z Rotation ................................................................................................. 55
Scaling the Object ....................................................................................... 56
X Scale ..................................................................................................... 56
Y Scale ..................................................................................................... 57
Z Scale ..................................................................................................... 58
Changing Object Position ............................................................................59
X Position .................................................................................................. 59
Y Position .................................................................................................. 60
Z Position .................................................................................................. 61
Chapter 8: Graphic Functions: Opacity and Effects
You can adjust opacity and apply a variety of color mixing and geometric
effects to each individual Graphic Object.
Opacity ....................................................................................................... 63
Visual Mode ................................................................................................ 64

DL.2 User Manual xiii
Content Optimization .................................................................................. 65
Push to Sepia ............................................................................................. 66
Push to Red ............................................................................................... 67
Gray maker 1 ............................................................................................. 68
Gray maker 2 ............................................................................................. 69
Posterizer .................................................................................................. 70
Color to B/W .............................................................................................. 71
Fire Gradient .............................................................................................. 71
Negative Art .............................................................................................. 72
Exposure Control ........................................................................................ 73
Effect 1 Mode and Effect 2 Mode .................................................................74
Chapter 9: Graphic Functions: Synchronizing Content
After designating a master fixture with the Sync To parameter, you can
synchronize the content of other fixtures to any Object on the master in terms
of playback time, rotation or both.
Synchronization Parameters .......................................................................77
Sync Mode ................................................................................................. 77
Playback Timing ...................................................................................... 78
Sync To ..................................................................................................... 78
Chapter 10: Global Functions
Global Graphic controls affect the composite image created by defining two or
three separate object graphics. You can adjust intensity, define masks, select
a point in space to view the composite image, and control keystone correction.
Global Intensity ..........................................................................................79
Global Effect Mode 1 and Effect Mode 2 .......................................................80
Masking Control ..........................................................................................83
Mask Shape Select and Strobing ................................................................... 83
Mask Shapes .......................................................................................... 83
Strobing Mask Shapes .............................................................................. 83
Mask Size .................................................................................................. 84
Mask Edge Fade ......................................................................................... 85
Image Edge Fade ....................................................................................... 86
Keystone Correction Parameters .................................................................87
X Ratio ........................................................................................................88
Y Ratio ........................................................................................................88
Global Viewpoint Mode ................................................................................89
Perspective View, Spherical Coordinates ........................................................ 89
Perspective View, Cartesian Coordinates ........................................................ 89
Orthogonal View, Cartesian Coordinates ........................................................ 89
Viewpoint Position X ...................................................................................90

xiv DL.2 User Manual
Viewpoint Position Y ................................................................................... 90
Viewpoint Position Z (Zoom) ...................................................................... 90
Chapter 11: Effect Mode Options Descriptions
Effects can be applied to the Media File content (texture) mapped onto a 3-D
object. Multiple Color and Geometric options are available in Effect Mode
Parameters for both individual Graphic object and Global control.
Effect Mode Color Options ........................................................................... 92
All or Nothing ............................................................................................. 92
Background Color ....................................................................................... 92
Background Color Cycle ............................................................................... 92
Chromakey Coarse, Inverse ......................................................................... 93
Chromakey Fine ......................................................................................... 93
Chromakey Medium .................................................................................... 94
Chromakey Medium, Inverse ........................................................................ 94
CMY Add All Pixels ...................................................................................... 95
CMY Add Non-black Pixels ............................................................................ 95
Color DeConverge ...................................................................................... 96
Colorize Gray Scale ..................................................................................... 96
Edge Fade Color ......................................................................................... 97
Glow ......................................................................................................... 97
Intensity Key ............................................................................................. 98
Mask Color ................................................................................................ 98
RGB Add, All Pixels ..................................................................................... 99
RGB Add2, All Pixels ................................................................................... 99
RGB Add to Non-black Pixels .......................................................................100
RGB Invert ...............................................................................................100
RGB Invert and Swap to BRG ......................................................................100
RGB Invert and Swap to GBR ......................................................................101
RGB Scale ................................................................................................101
RGB Swap to BGR ......................................................................................101
RGB Swap to BRG ......................................................................................102
RGB Swap to GBR ......................................................................................102
RGB Swap to GRB ......................................................................................102
RGB Swap to RBG ......................................................................................103
Scan Line .................................................................................................103
Solarize 1 .................................................................................................103
Solarize 2 .................................................................................................104
Solarize 3 .................................................................................................104
Solarize 4 .................................................................................................104
Solid Color RGB .........................................................................................105

DL.2 User Manual xv
Geometric Effect Options ..........................................................................106
Cartoon Edge .......................................................................................... 106
Collage Generator ..................................................................................... 106
Central Panorama Collage ....................................................................... 106
Horizontal Panorama Collage ................................................................... 107
Vertical Panoramas Collage ..................................................................... 107
Edge Detect Black and White ...................................................................... 108
Edge Detect Color ..................................................................................... 108
Horizontal Mirror ...................................................................................... 109
Magnifying Lens ....................................................................................... 109
Magnifying Lens 2 ..................................................................................... 109
Pixel Twist ............................................................................................... 110
Raindrop ................................................................................................. 110
Sinewave, Circular w/X-axis Wobbulation ..................................................... 111
Sinewave, Circular w/Z-axis Wobbulation ..................................................... 111
Sinewave, Horizontal w/X-axis Wobbulation ................................................. 112
Sinewave, Horizontal w/Z-axis Wobbulation ................................................. 112
Sinewave, Vertical w/X-axis Wobbulation ..................................................... 113
Sinewave, Vertical w/Y-axis Wobbulation ..................................................... 113
Sinewave, Vertical w/Z-axis Wobbulation ..................................................... 113
Texture Ripple, Asymmetrical Circular ........................................................ 114
Texture Ripple, Horizontal .......................................................................... 115
Texture Ripple, Vertical ............................................................................. 115
Tiling ...................................................................................................... 116
Transparent Wipes.................................................................................... 117
Chapter 12: Fixture Motion Functions
This chapter describes mechanical control for the DL.2 fixture with it’s internal
projector.
Pan and Tilt ...............................................................................................119
Dimmer ..................................................................................................... 119
Focus ........................................................................................................119
Zoom ......................................................................................................... 119
MSpeed (Motor Speed) ..............................................................................120
Control Function Options ..........................................................................120
Fixture Operations .................................................................................... 120
Projector Control ...................................................................................... 121
Control Parameter Projector Options ........................................................ 121
Using the Internal Projector’s Menu .......................................................... 122

xvi DL.2 User Manual
Chapter 13: Live Video Input and Control
The DL.2 graphics engine can receive video from an external source or its own
integrated digital video camera equipped with an infared illuminator to provide
a direct digital video feed option.
Live Video Sources .................................................................................... 123
Internal Camera ........................................................................................123
Other Video Sources ..................................................................................123
Live Video Connection Options .................................................................. 124
Configuring the Video Input Source .......................................................... 124
Sending the Camera Feed to Camera Out .................................................. 125
Controlling the Internal Camera Input ...................................................... 125
Camera Zoom ...........................................................................................125
Camera Focus ...........................................................................................125
IR Illuminator ...........................................................................................125
Camera Shutter ........................................................................................126
White Balance Mode ...................................................................................126
Orientation ...............................................................................................126
Camera Effects ..........................................................................................126
Chapter 14: Content Management Application (CMA)
A Content Management Application (CMA) running on your workstation or
laptop computer gives you remote control of uploading and crossloading
content, upgrading software and fixture configuration for multiple DL.2 fixtures
on a fixture network.
Overview. ................................................................................................. 127
Installing the CMA .................................................................................... 127
Upgrading CMA Software to a Newer Version .................................................128
Auto Discovery ..........................................................................................128
Fixture Identification ..................................................................................128
The Management Client Window ............................................................... 128
Viewing Server Identification Information .....................................................129
Client Window Content Organization ............................................................130
Preloaded Stock Content .........................................................................130
Custom User Content ..............................................................................130
Media Files ............................................................................................130
3D Object Files ......................................................................................131
Viewing Server Configuration Data ...............................................................131
Viewing Content ........................................................................................131
Viewing Folders ......................................................................................132
Viewing Files ..........................................................................................132
Managing User Content ............................................................................. 133

DL.2 User Manual xvii
Naming and Deleting User Content Files and Folders ..................................... 133
Assigning DMX Values to User Content ........................................................ 133
Assigning DMX Values Automatically ........................................................ 133
Editing User Content DMX Values ............................................................. 134
Valid DMX Values .................................................................................. 134
Moving User Content Files and Folders ......................................................135
Downloading Content from a DL.2 Fixture to Your Local Drive ......................... 136
Uploading Content from Your Local Drive to a DL.2 Fixture ............................. 136
Moving Files Between Fixtures .................................................................. 137
Archiving User Content .............................................................................138
Using Local Archives to Prepare Content Offline ............................................ 138
Creating a Local Archive ............................................................................ 138
For CMA Running Windows XP ................................................................. 138
For CMA Running Mac OS 10.4 ................................................................ 139
Creating Content Backup Archive ................................................................ 139
Deploying a Content Archive ...................................................................... 139
Cloning User Content ................................................................................140
Deleting Content .......................................................................................141
DMX Summary ..........................................................................................141
Upgrading Software ..................................................................................141
Verifying Software Versions ....................................................................... 141
Upgrading the CMA Software ...................................................................... 142
Upgrading DL.2 Fixture Software ................................................................ 142
Viewing and Editing Fixture Configuration ................................................ 143
Viewing Fixture Configuration Values ........................................................... 144
Editing Configuration Values ....................................................................... 144
Chapter 15: Maintenance and Troubleshooting
This chapter includes information on replacing parts, cleaning the fixture, and
some basic troubleshooting procedures.
Pan and Tilt Locking ..................................................................................149
Maintaining the Filtering System ...............................................................150
Filter Warnings ......................................................................................... 150
Cleaning and Replacing Filters .................................................................... 150
Cleaning the Base Housing Filter .............................................................. 151
Replacing the Fixture Filter ..................................................................... 151
Cleaning the Internal Projector Filter ........................................................ 152
Replacing the Lamp ................................................................................... 153
Replacing the Fuse ....................................................................................154
Cleaning or Replacing the Front Window ...................................................154
Replacing Motor Driver Boards ..................................................................155
Fixture Head Driver Board ......................................................................... 156

xviii DL.2 User Manual
Replacing Fixture Base Driver Board .............................................................156
Troubleshooting ........................................................................................ 157
Button Shortcut Commands ........................................................................157
Status Message Menu Display .....................................................................157
Button Action .........................................................................................158
Inactivity Timer ......................................................................................158
Supported Error/Warning Messages ..........................................................158
System State LEDs ....................................................................................160
Board LED States ......................................................................................160
General Troubleshooting Suggestions ...........................................................160
Frequently Asked Questions ........................................................................162
Chapter 16: Restoring the System
There are two types of system restore that you can perform on the DL.2 with
your DL.2 System Restore CD: a “full” system restore or a “partial” system
restore.
Full System Restore .................................................................................. 164
Partial System Restore (Preserving Content) ............................................ 164
Performing the System Restore ................................................................ 165
Appendix A: DL.2 DMX Protocol............................................................... 169
This table describes the Standard, Dual and Single Protocol for DL.2 fixtures.
Appendix B: MSpeed Conversion Table................................................... 219
This table lists the MSpeed (motor) movement times and their corresponding
DMX controller values.
Appendix C: Custom User Content
There are several considerations to keep in mind when creating custom content
to control with the DL.2 graphics engine software.
Creating Video Media Files ........................................................................ 221
Creating 3-D Objects ................................................................................. 221
Managing Custom Content ........................................................................ 222
Appendix D: DL.2 Specifications
FIxture mechanical, electrical, optical and component cpecifications are listed.
Mechanical ................................................................................................ 223
Electrical Specifications ............................................................................ 224
Projector Specifications ............................................................................ 224
Camera Module Specification .................................................................... 224
Environmental Specifications .................................................................... 224

DL.2 User Manual xix
Cable and Connector Specifications ...........................................................225
Video Connectors: .................................................................................... 225
Peripheral/Network Connectors: ................................................................. 225
DMX and RS-485 Projector Link .................................................................. 225
Appendix E: Safety Information
Appendice E: Importantes Informations Sur La Sécurité ................................. 228
Anhang E: Wichtige Hinweise Für Ihre Sicherheit .......................................... 229
Apéndice E: Información Importante De Seguridad ....................................... 230
Appendice E: Importanti Informazioni Di Sicurezza ....................................... 231
Vigtig Sikkerhedsinformation ...................................................................... 231

xx DL.2 User Manual