High End studio spot 575 User manual

Studio Spot® 575 User Manual i
User Manual
© High End Systems, Inc. 2004, All Rights Reserved
Information and specifications in this document are subject to change without notice.
High End Systems, Inc. assumes no responsibility or liability for any errors or inaccura-
cies that may appear in this manual.
Trademarks used in this text: Studio Spot, Cyberlight, Lightwave Research, LithoPattern,
x.Spot, Studio Color, Technobeam, Wholehog III, and LithoPatterns are registered trade-
marks; and TalkBack, the High End Systems globe logo and the Hog logo are trademarks
of High End Systems, Inc. or High End Systems Europe Ltd. Belden is a registered trade-
mark of Belden, Inc., Motorola is a registered trademark of Motorola Inc.; Philips is a reg-
istered trademark of Philips Corporation.
Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. High End Systems, Inc. dis-
claims any proprietary interest in trademarks and trade names owned by others.
Studio Spot is protected by one or more of the following patents:
US 4,392,187; US 4,602,321; US 4,688,161; US 4,701,833; US 4,709,311; US 4,779,176; US 4,800,474; US 4,962,687;
US 4,972,306; US 4,980,806; US 5,010,459; US 5,031,078; US 5,073,847; US 5,078,039; US 5,186,536; US 5,209,560;
US 5,278,742; US 5,282,121; US 5,307,295; US 5,329,431; US 5,331,822; US 5,367,444; US 5,402,326; US 5,430,629;
US 5,432,691; US 5,454,477; US 5,455,748; US 5,506,762; US 5,515,254; US 5,537,303; US 5,545,951; US 5,580,164;
US 5,590,954; US 5,590,955; US 5,640,061; US 5,647,662;US 5,665,305; US 5,691,886; US 5,728,994; US 5,758,955;
US 5,758,956; US 5,769,527;US 5,774,273; US 5,798,619; US 5,806,951; US 5,823,661; US 5,825,548; US 5,828,485;
US 5,829,868; US 5,857,768; US 5,882,107; US 5,934,794; US 5,940,204; US 5,945,786; US 5,953,152; US 5,980,066;
US 6,048,080; US 6,327,103; US 6,048,081; US 6,057,958; US 6,054,816; US 6,126,288; US 6,142,652; US 6,172,822;
US 6,188,933; US 6,208,087; US 6,219,093; US 6,220,730; US 6,241,366; US 6,255,787; US 6,256,136; US 6,278,542;
US 6,288,828; US 6,327,103; US 6,421,165; US 6,430,934; US 6,466,357; US 6,502,961; US D347,113; US D350,408;
US D359,574; US D360,404; US D365,165; US D366,712; US D370,080; US D372,550; US D377,338; US D381,740;
US D409,771; US 6693392; US 6719433; EP 0662275; EP 0767398; DE 621495; DE 655144; DE 797503; EP 0475082;
GB 2 043 769 B; GB 2 055 842 B; GB 2 283 808 B; GB 2 290 134 B; GB 2 291 814 B; GB 2 292 530 B; GB 2 292 896 B;
GB 2 294 909 B; GB 2 295 058 B; GB 2 303 203 B; GB 2 306 887 B; GB 2 307 036 B; GB 2 316 477 B; MR0862-1996;
M9,604,224.9
Additional patents pending.
Friday, July 18, 2008
Studio Spot User Manual
P/N 60600093 Version 3.0
Printed in the U.S.A.
®
audiovias.com

ii Studio Spot® 575 User Manual
Contacting High End Systems®
US and the Americas
Sales Department: High End Systems, Inc.
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 512.836.2242
fax: [phone]
Customer Service: High End Systems, Inc.
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 800.890.8989
24-hour fax: [phone]
24-hour voice mail: 512.837.3063 or 800.890.8989
U.S. New York High End Systems, Inc. New York
311 W. 43rd Street
New York, NY 10036
voice: 210.957.6840
fax: [phone]
U.S. Los Angeles: High End Systems, Inc.
8200 Haskell Avenue
Van Nuys, CA 91406 US
voice: 818.947.0550
fax: [phone]
Europe Headquarters: High End Systems Europe LTD.
53 Northfield Road
London W13
voice: +44 20.8579.5665
fax: [phone]
Singapore: High End Systems Singapore Pte. Ltd.
1 Tannery Road 06-05
Cencon 1
Singapore 1334
voice: [phone]
FAX: [phone]
World Wide Web: http://www.highend.com

Studio Spot® 575 User Manual iii
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45104
Manufacturer’s name: High End Systems
Distributor’s name: High End Systems, Inc.
2105 Gracy Farms Lane
Austin, Texas 78758
U.S.A.
Declares that the product
Product Name: Studio Spot 575
Product Number: Studio Spot 575
Product Options: All
conforms to the following EEC directives:
73/23/EEC, as amended by 93/68/EEC
89/336/EEC, as amended by 92/31/EEC and 93/68/EEC
Equipment referred to in this declaration of conformity first manufactured in 1998 in com-
pliance with the following standards:
Safety: EN 60598-1: 1993
EN 60598-2-17: 1989
A1-A3: 1993
EMC: EN 55022, 1987 Class A ITE
IEC 801-2, 1991 Level 2 (4/8 kV)
IEC 801-3, 1991 Draft 5 Level 2 (3 V/m)
IEC 801-4, 1988 Level 2 (1 kV/0.5 kV)
U.S.A., Friday, July 18, 2008
Kenneth Hansen, Compliance Engineer

iv Studio Spot® 575 User Manual
Product Modification Warning
High End Systems products are designed and manufactured to meet the requirements of
United States and International safety regulations. Modifications to the product could
affect safety and render the product non-compliant to relevant safety standards.
Mise En Garde Contre La Modification Du Produit
Les produits High End Systems sont conçus et fabriqués conformément aux exigences
des règlements internationaux de sécurité. Toute modification du produit peut entraîner
sa non conformité aux normes de sécurité en vigueur.
Produktmodifikationswarnung
Design und Herstellung von High End Systems entsprechen den Anforderungen der U.S.
Amerikanischen und internationalen Sicherheitsvorschriften. Abänderungen dieses
Produktes können dessen Sicherheit beeinträchtigen und unter Umständen gegen die
diesbezüglichen Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto
I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i requisiti
delle normative di sicurezza statunitensi ed internazionali. Qualsiasi modifica al prodotto
potrebbe pregiudicare la sicurezza e rendere il prodotto non conforme agli standard di
sicurezza pertinenti.
Advertencia De Modificación Del Producto
Los productos de High End Systems están diseñados y fabricados para cumplir los
requisitos de las reglamentaciones de seguridad de los Estados Unidos e internacionales.
Las modificaciones al producto podrían afectar la seguridad y dejar al producto fuera de
conformidad con las normas de seguridad relevantes.
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.

Studio Spot® 575 User Manual v
Important Safety Information
Instructions pertaining to continued protection against fire, electric shock, exposure to
excessive ultraviolet (UV) radiation, and injury to persons are found in Appendix C.
Please read all instructions prior to assembling, mounting, and operating this equipment.
Important: Informations De Sécurité
Les instructions se rapportant à la protection permanente contre les incendies,
l’électrocution, l’exposition à un rayonnement ultraviolet (UV) excessif et aux blessures
corporelles se trouvent dans l’Annexe C.
Veuillez lire toutes les instructions avant d’assembler, de monter ou d’utiliser cet
équipement.
Wichtige Sicherheitshinweise
Sicherheitsanleitungen zum Schutz gegen Feuer, elektrischen Schlag, übermäßige UV-
Strahlung und Verletzung von Personen finden Sie in Anhang C.
Vor der Montage, dem Zusammenbau und der Intbetriebnahme dieses Geräts alle
Anleitungen sorgfältig durchlesen.
Informazioni Importanti Di Sicurezza
Le istruzioni sulla protezione da incendi, folgorazione, esposizione eccessiva a raggi
ultravioletti (UV) e infortuni sono contenute nell’appendice C.
Si prega di leggere tutte le istruzioni prima di assemblare, montare e azionare
l’apparecchiatura.
Informacion Importante De Seguridad
En el Apéndice C se encuentran instrucciones sobre protección continua contra incendios,
descarga eléctrica, exposición excesiva a radiación ultravioleta (UV) y lesiones
personales.
Lea, por favor, todas las instrucciones antes del ensamblaje, montaje y operación de este
equipo.

vi Studio Spot® 575 User Manual
Symbols
The following international caution and warning symbols appear in margins
throughout this manual to highlight messages.
Caution: This symbol appears adjacent to Caution messages. Not heeding
these messages could result in personal injury and/or damage to
equipment.
Warning:This symbol appears adjacent to high voltage warning messages.
Not heeding these messages could result in serious personal
injury.
This symbol indicates that a fire hazard is present. Not heeding these
messages could result in serious personal injury.
This symbol indicates that eye protection is required.
This symbol indicates an explosion hazard.
This symbol indicates the minimum distance to a lighted object, which in
this case, is 1 meter.
This symbol indicates a hot surface.
This symbol indicates that an object not be mounted on a flammable
surface
Manual Conventions
This manual uses the following conventions:
• a menu button will look like: press the <ENTER> button
• an L.E.D. display item on the front panel will look like: SET menu
• DOS prompts, computer file names, and input keyboard strokes will look like:
Type a:\ setup.

Studio Spot® 575 User Manual vii
Warranty Information
Limited Warranty
Unless otherwise stated, your product is covered by a two year parts and labor limited
warranty. Dichroic filters are not guaranteed against breakage or scratches to coating. It is
the owner’s responsibility to furnish receipts or invoices for verification of purchase, date,
and dealer or distributor. If purchase date cannot be provided, date of manufacture will be
used to determine warranty period.
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Material Authorization (RMA) number from your dealer
or point of purchase BEFORE any units are returned for repair. The manufacturer will
make the final determination as to whether or not the unit is covered by warranty. Lamps
are covered by the lamp manufacturer’s warranty.
Any Product unit or parts returned to High End Systems must be packaged in a suitable
manner to ensure the protection of such Product unit or parts, and such package shall be
clearly and prominently marked to indicate that the package contains returned Product
units or parts and with an RMA number. Accompany all returned Product units or parts
with a written explanation of the alleged problem or malfunction. Ship returned Product
units or parts to: 2105 Gracy Farms Lane, Austin, TX 78758 USA.
Note: Freight Damage Claims are invalid for fixtures shipped in non-factory boxes
and packing materials.
Freight
All shipping will be paid by the purchaser. Items under warranty shall have return
shipping paid by the manufacturer only in the Continental United States. Under no
circumstances will freight collect shipments be accepted. Prepaid shipping does not
include rush expediting such as air freight. Air freight can be sent customer collect in the
Continental United States.
REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. HIGH END SYSTEMS, INC. MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PRODUCT, AND
HIGH END SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. HIGH END SHALL NOT BE LIABLE FOR
ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST
PROFITS, SUSTAINED OR INCURRED IN CONNECTION WITH ANY PRODUCT OR
CAUSED BY PRODUCT DEFECTS OR THE PARTIAL OR TOTAL FAILURE OF ANY
PRODUCT REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND
WHETHER OR NOT SUCH DAMAGE WAS FORESEEN OR UNFORESEEN.
Warranty is void if the product is misused, damaged, modified in any way, or for
unauthorized repairs or parts. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

viii Studio Spot® 575 User Manual

Studio Spot® 575 User Manual ix
Table of Contents
Contacting High End Systems® ............................................................................................ii
Product Modification Warning ............................................................................................. iv
FCC Information .................................................................................................................... iv
Important Safety Information ................................................................................................ v
Symbols .................................................................................................................................. vi
Manual Conventions .............................................................................................................. vi
Warranty Information ...........................................................................................................vii
Limited Warranty ........................................................................................................... vii
Returning an Item Under Warranty for Repair ...........................................................vii
Freight ............................................................................................................................. vii
Chapter 1: Product Overview
Features ................................................................................................................................1-1
Standard Features ............................................................................................................1-1
Optional Accessories ...........................................................................................................1-4
Specifications .......................................................................................................................1-5
Physical .............................................................................................................................1-5
Electrical ...........................................................................................................................1-6
Optical System .................................................................................................................1-7
Dichroic Glass Gobos (Standard and Standard Zoom Models) ................................1-7
Effect Glass (All Models) ..............................................................................................1-7
LithoPatterns (All Models) ...........................................................................................1-7
Lenses (Standard and CMY Models) ...........................................................................1-7
Zoom Lens (Standard Zoom and CMY Zoom Models) ..............................................1-7
Lamps ...............................................................................................................................1-8
Front and Side Panel Functionality ....................................................................................1-8
Chapter 2: Setup and Configuration
Unpacking the Fixture .........................................................................................................2-1
Save All Shipping Materials ............................................................................................2-1
Inspecting the Fixture .....................................................................................................2-1
Road Cases .......................................................................................................................2-2
Minimum Material Requirements ................................................................................2-2
Construction Requirements .........................................................................................2-2
Fixture Setup ........................................................................................................................2-3
Power and Breaker Requirements ..................................................................................2-3
Installing a Power Cord Cap ...........................................................................................2-3
Installing a Line Cord Cap - U.K. Only ...........................................................................2-4
Vatic Fitter Heads Information - Danmark ....................................................................2-4
Fixture Mounting .................................................................................................................2-4
Floor Mounting ................................................................................................................2-4
Truss Mounting ................................................................................................................2-5

xStudio Spot® 575 User Manual
Linking the Fixtures .............................................................................................................2-6
Data Cabling and Connectors .........................................................................................2-6
DMX Data Cables ..........................................................................................................2-6
Cable Connectors ..........................................................................................................2-7
Setting up the Link ...........................................................................................................2-7
Constructing a Terminator ..............................................................................................2-8
Powering On the Fixture .....................................................................................................2-9
Verifying and Uploading Fixture Software ........................................................................2-9
Setting the Fixture Address ...............................................................................................2-10
Fixture Number Mode ...................................................................................................2-10
DMX Starting Channel Mode ........................................................................................2-10
Controlling Studio Spot With DMX ..................................................................................2-11
Chapter 3: Fixture Operation
Direct Menu System Access ................................................................................................3-1
TalkBack™ Support for Remote Access .............................................................................3-1
Navigating the Menu System ..............................................................................................3-2
The Studio Spot 575 Display ...........................................................................................3-2
Unlocking the Menu System ...........................................................................................3-2
Exiting the Menu System ................................................................................................3-3
The Menu System Structure ............................................................................................3-3
Address Menu .......................................................................................................................3-3
Determining DMX Start Channel Assignment ...........................................................3-3
Setting DMX Start Channel or Fixture Number .........................................................3-4
Information Menu ................................................................................................................3-5
Viewing Lamp Status .......................................................................................................3-5
Viewing Lamp Hours .......................................................................................................3-5
Viewing Lamp Strikes ......................................................................................................3-5
Viewing System Version Number ...................................................................................3-6
Resetting Lamp Hours .....................................................................................................3-6
Viewing Fixture Hours .....................................................................................................3-6
Resetting Fixture Hours ...................................................................................................3-6
Monitoring Internal Fixture Temperature ......................................................................3-7
Viewing the Current Internal Temperature .................................................................3-7
Viewing the Minimum Internal Temperature .............................................................3-7
Viewing the Maximum Internal Temperature .............................................................3-7
Resetting Temperature Readings .................................................................................3-7
Viewing DMX Values .......................................................................................................3-8
View Errors and Fixture Parameter DMX Values ......................................................3-8
Viewing DMX Data by Channel Number ....................................................................3-8
Viewing Sensor Data .......................................................................................................3-8
Test Menu .............................................................................................................................3-9
Changing Boot Codes ......................................................................................................3-9
Lamp Test .........................................................................................................................3-9

Studio Spot® 575 User Manual xi
Homing the Fixture .......................................................................................................3-10
Disabling Encoders ........................................................................................................3-10
Moving the Fixture to Setup Position ...........................................................................3-10
Self Tests ........................................................................................................................3-11
Mode Menu .........................................................................................................................3-12
Crossloading Fixtures ....................................................................................................3-12
Setting the Studio Series Fixture ..................................................................................3-12
Set Menu .............................................................................................................................3-13
Reverting to the Factory Defaults .................................................................................3-13
Setting Lens Option .......................................................................................................3-13
Setting Addressing Method ...........................................................................................3-14
Inverting Display ...........................................................................................................3-14
Inverting Pan ..................................................................................................................3-14
Inverting Tilt ..................................................................................................................3-15
Swapping Pan and Tilt ..................................................................................................3-15
Setting the Fixture Shutdown Time .............................................................................3-15
Preset Menu ........................................................................................................................3-16
Chapter 4: DMX Programming
DMX Programming Options ...............................................................................................4-1
Programming with a DMX Controller ................................................................................4-1
Standalone Programming ...................................................................................................4-2
Preset Programming ........................................................................................................4-2
Menu System Scene Editing ...........................................................................................4-2
Setting Attributes ..........................................................................................................4-2
Using the Time Parameter ...........................................................................................4-3
Using Crossfade, Delay, and MSpeed .........................................................................4-4
Step-By-Step Editing Example .....................................................................................4-4
Copying and Pasting Scenes ...........................................................................................4-6
Capturing DMX Data Into a Scene .................................................................................4-6
Resetting (Re-Initializing) a Scene .................................................................................4-7
Playing Back Scenes in Stand-Alone Mode ...................................................................4-7
Determining the Active Scene .....................................................................................4-8
Synchronizing Preset Playback ...................................................................................4-8
Connecting and Addressing Fixtures for Synchronized Playback ............................4-9
Playing Back Synchronized Scenes .............................................................................4-9
DMX Parameter Descriptions ...........................................................................................4-11
Pan and Tilt ....................................................................................................................4-11
Color Parameters (Studio Spot 575/575 Zoom models) ..............................................4-11
Color Function ............................................................................................................4-11
Color Position ..............................................................................................................4-12
Color Parameters(StudioSpot575CMY/CMY Zoom models) .....................................4-14
Color Function ............................................................................................................4-14
CMY Color Channels ..................................................................................................4-14

xii Studio Spot® 575 User Manual
Litho Wheel Function ....................................................................................................4-14
Litho Wheel Position ......................................................................................................4-15
Litho Wheel Rotation .....................................................................................................4-15
Frost (Studio Spot 575 and CMY models) ....................................................................4-16
Zoom (Studio Spot 575 Zoom/CMY Zoom models) ....................................................4-16
Focus ...............................................................................................................................4-16
Iris ...................................................................................................................................4-17
Shutter ............................................................................................................................4-17
Dimming .........................................................................................................................4-18
MSpeed ...........................................................................................................................4-18
Macro Parameter ............................................................................................................4-19
Control Channel .............................................................................................................4-20
Chapter 5: General Maintenance
Before You Begin ..................................................................................................................5-1
Replacing the Lamp .............................................................................................................5-2
Optimizing the Lamp ...........................................................................................................5-3
Lens Installation ...................................................................................................................5-4
Replacing Dichroic Glass .....................................................................................................5-5
LithoPattern and Effect Installation ....................................................................................5-7
Cleaning Components ..........................................................................................................5-8
Chapter 6: Troubleshooting
Before You Begin ..................................................................................................................6-1
Status LEDs ..........................................................................................................................6-2
Display Error Messages .......................................................................................................6-2
General Troubleshooting .....................................................................................................6-5
Upload Troubleshooting ......................................................................................................6-6
Onboard Self-Tests ...............................................................................................................6-6
Testing DMX Data ................................................................................................................6-6
Support Checklist .................................................................................................................6-6
Appendix A: DMX Protocol
Standard Studio Spot® 575DMX Protocol ........................................................................A-1
Studio Spot® 575 Zoom DMX Protocol ............................................................................A-9
Studio Spot® 575 CMY DMX Protocol ...........................................................................A-17
Studio Spot®575CMY ZoomDMX Protocol ...................................................................A-21
Appendix B: MSpeed Conversion Table
Appendix C: Safety Information
Appendix D: Menu Maps
Studio Spot 575/575 Zoom Models ....................................................................................D-1
Studio Spot 575 CMY/CMY Zoom Models ........................................................................D-9

Studio Spot® 575 User Manual xiii
List of Figures
Figure 1-1 Studio Spot 575/575CMY Physical Dimensions ............................................1-5
Figure 1-2 Studio Spot 575Z/575CMY Zoom Physical Dimensions ..............................1-6
Figure 1-3 Front Panel .......................................................................................................1-8
Figure 1-4 Fixture side panels ...........................................................................................1-9
Figure 2-1 Removing the Bezel ...........................................................................................2-1
Figure 2-2 Roadcase Construction ......................................................................................2-2
Figure 2-3 Floor Installation ................................................................................................2-4
Figure 2-4 Attaching Mounting Hardware .........................................................................2-5
Figure 2-5 Safety Cable Installation ...................................................................................2-5
Figure 2-6 Data Cable Construction ...................................................................................2-7
Figure 2-7 Data In and Data Out Connectors ....................................................................2-7
Figure 2-8 Linking fixtures to a DMX console ...................................................................2-8
Figure 2-9 Data Terminator .................................................................................................2-9
Figure 2-10 Using the Front Panel ....................................................................................2-10
Figure 3-1 Menu navigation buttons ...................................................................................3-2
Figure 4-1 Crossfade, Delay, and MSpeed Example .........................................................4-4
Figure 4-2 Synchronized Playback Example .....................................................................4-9
Figure 4-3 Studio Spot 575 factory color wheels .............................................................4-12
Figure 4-4 Studio Spot 575 factory litho wheels ..............................................................4-15
Figure 4-5 MSpeed Values ................................................................................................4-18
Figure 5-1 Removing Lamp Access Cap .............................................................................5-2
Figure 5-2 Installing the Lamp ............................................................................................5-2
Figure 5-3 Lamp Optimization Screw .................................................................................5-3
Figure 5-4 Removing and replacing Lens ...........................................................................5-4
Figure 5-5 Locating the Color Wheels ................................................................................5-5
Figure 5-6 Removing Dichroic Glass ..................................................................................5-5
Figure 5-7 Dichroic Glass Orientation ................................................................................5-6
Figure 5-8 Determining The Coated Side of Dichroic Glass .............................................5-6
Figure 5-9 Locating the Litho/Effect Wheels ......................................................................5-7
Figure 5-10 Factory Litho Wheel Position ..........................................................................5-7
Figure 5-11 Removing the Securing Spring .......................................................................5-7
Figure 6-1 Status LEDs on front panel above ....................................................................6-2

xiv Studio Spot® 575 User Manual
List of Tables
Table 1-1 Studio Spot 575 Model Feature Comparison .................................................. 1-1
Table 1-2 Lens Specifications ........................................................................................... 1-7
Table 2-1 Breaker Requirements ...................................................................................... 2-3
Table 2-2 DMX Starting Channels ................................................................................... 2-11
Table 4-1 Color Functions ................................................................................................ 4-11
Table 4-2 Colors Options in Combined Mode ............................................................... 4-12
Table 4-3 Litho Functions ................................................................................................ 4-14
Table 4-4 Litho Rotation .................................................................................................. 4-15
Table 4-5 Frost Functions ............................................................................................... 4-16
Table 4-6 Iris and Iris Strobing Effects ........................................................................... 4-17
Table 4-7 Shutter Strobe Functions ............................................................................... 4-17
Table 4-8 Macro Functions ............................................................................................. 4-19
Table 4-9 Control Functions ........................................................................................... 4-20
Table 5-1 Calculating Beam Angle .................................................................................... 5-4
Table 6-1 Display Error Messages .................................................................................... 6-2

Studio Spot® 575 User Manual Product Overview 1-1
1
Chapter 1:
Product Overview
Features
Studio Spot 575 is available in four models that vary in features as shown in the
following table:
Standard Features
• Automatic switching power supply operates on all international voltages at 50 or
60 Hertz .
• Provides full DMX control using 24 channels with 16-bit accuracy for pan, tilt,
and gobo indexing; and 8-bit accuracy for all other parameters.
• Convection cooling ensures quiet performance.
• 370° pan and 255° tilt
• Up to 35 combination patterns using 10 rotating litho/effects (plus two open)
located on two independent wheels. Each wheel can be independently indexed
and rotated in either direction at variable speeds. Slow and lenticular glass
effects are standard. Optional and custom LithoPatterns, effect glass, and prisms
are available and are easily installed.
• Each of the two color wheels support five dichroic glass filters plus open.
• Optional CMY Feature replaces standard color wheels with two double wheels
that can be rotated to achieve continuous color mixing.
• The MSR 575/2 provides a high color rendering index and a high color
temperature of 6200 K. An optional MSD 575 lamp is available for architectural
applications. The MSD 575 provides a color temperature of 5600 K and enhanced
lamp life. Studio Spot fixtures also include a lamp power reduction for special
applications.
Table 1-1 Studio Spot 575 Model Feature Comparison
Feature Studio Spot Model
575 575 Zoom CMY CMY Zoom
Color Wheels with 10 Dichroic Glass Filters Total XX
CMY Continuous Color Mixing Wheels XX
Mechanical Frost Flags XX
Mechanical Zoom Lens XX

1-2 Product Overview Studio Spot®575 User Manual
• A patented elliptical/spherical reflector system delivers an extraordinary gain in
light output compared to systems in other similar fixtures.
• Special effect functions provide color spins, random color combinations, random
gobos, or MSpeed to control the color and litho wheels. The ‘blink’ function
quickly strobes the dimming system during color and/or litho changes.
• Eight factory-programmed macros modify a specific set of constructs to produce
a unique effect, while allowing the user to retain control of all other constructs.
• A variable frost mechanism provides infinite beam diffusion to create a wash
effect.
Note: Frost is not available in models with the optional Zoom lens
feature.
• A smooth mechanical dimming system provides seamless dimming without
affecting the beam shape or the color temperature output.
• An independent iris can remotely manipulate the beam diameter.
• The variable remote focus lens can precisely focus on either litho/effect wheel at
any distance.
• The standard lens provides an 18° beam angles. Optional 13° and 30° lenses are
available for narrow and wide field projection.
• Optional 18° - 30° Zoom lens is available
• The dimming system provides instant blackout, variable and random speed
strobes, variable and random ramp/snap effects, and a blink function.
Additionally, Studio Spot can dim while strobing.
• Up to 16 scenes can be programmed for playback without a DMX console.
Scenes can be programmed from the front panel or ‘captured’ from DMX data.
You can playback data in stand-alone mode or synchronize playback with up to
32 fixtures.
• Optical encoders for the pan and tilt systems automatically correct the fixture’s
position.
• Onboard menu system allows the user to easily program all functions of the
fixture and provides a full set of diagnostic functions. Studio Spot can also serve
as a DMX tester to view channel values and DMX errors. The display can be
remotely turned on, off, or dimmed via DMX.
• Five LED indicators visually provide the status of the lamp power supply, motor
power supply, and data.
• Studio Spot can be truss mounted on 22-inch centers in any orientation or it can
be floor mounted on its rubber feet.
• Digitally controlled stepper motors provide precision control, high torque,
smooth movement, near quiet performance, and very long life.

Studio Spot® 575 User Manual Product Overview 1-3
1
• Fixture shutdown, lamp on/off, and homing can be accessed remotely via DMX.
You can also turn the lamp on or off and home the fixture with the front panel
menu system.
• The integral AC power switch/breaker is conveniently located on the side of the
fixture.
• Power factor correction capability optimizes the light source's efficiency and
deliver maximized power economy.
• Power saving mode decreases the wattage and reduces heat when the dimming
system is closed. When the shutter is opened, the lamp instantly returns to full
power.
• Operating software can be uploaded from the Lightwave Research Upload
Dongle, a lighting console, or from another fixture. The latest software version is
available at www.highend.com.
• The lamp cover is secured through its wiring harness for additional safety. Multi-
point grounding is provided throughout for complete assurance of safe operation.
The bezel is secured to the unit by an additional safety cable. The fixture and all
electronics comply with current UL, ETL, C-ETL, CE, FCC, CSA, and EMC
standards for professional lighting fixtures.

1-4 Product Overview Studio Spot®575 User Manual
Optional Accessories
The Studio Spot optional accessories available from your High End Systems dealer/
distributor are listed in the table below. For more information about optional
accessories, contact either your High End Systems dealer/distributor, High End
System Sales, or visit the High End Systems Web site at www.highend.com. For
additional contact information, see “Contacting High End Systems®” on page -ii.
Note: Call High End Systems for information on standard or custom
dichroic color filters, lithopatterns and effect glass.
Part Description Part Number
Replacement MSR700-SA lamp 55030054
Color wheel dichroic filters See Note
Lithopatterns See Note
Effect Glass See Note
Whole Hog III lighting console 25020001
Lightwave Research Upload Dongle 26040002
10-foot heavy duty data cable with Neutrik XLRs 55050005
25-foot heavy duty data cable with Neutrik XLRs 55050006
50-foot heavy duty data cable with Neutrik XLRs 55050007
100-foot heavy duty data cable with Neutrik XLRs 55050008
Male XLR terminator 90404039
Neutrik 5/3 pin and 3/5 pin XLR convertor set 55050015
13° narrow field lens 80160029
18° standard field lens (factory installed) 80160030
Studio Spot User’s Manual 60600093
Cheeseborough clamp 55040014
Safety cable 12040001
Rubber feet 90410089
Keal road case for one fixture 39070001
Keal road case for two fixtures 39070002
Philips MSR 575/2 lamp 55030052
Philips MSD 575 lamp 55030050

Studio Spot® 575 User Manual Product Overview 1-5
1
Specifications
Physical
• Height: 713 mm (28.1 in.)for Standard Models; 733 mm (29.6) for Zoom Models
• Width: 551 mm (21.7 in.)
• Depth 318 mm (12.5 in.)
• Weight: 26.76 kg (59 lbs.)
For additional dimensions, refer to Figure 1-1 and Figure 1-1.
[203.71]
[478.00]
[700.81]
[342.85]
12.63 [320.70]
18.76 [476.53]
12.09 [306.96]
11.53 [292.74]
5.00 [127.00]
[146.46]
13.50
27.59
18.82
8.02
[66.95]
[29.44]
19.08 [484.71]
23.03 [584.91]
1.16
2.64
5.77
Figure 1-1 Studio Spot 575/575CMY physical dimensions

1-6 Product Overview Studio Spot®575 User Manual
Electrical
• Rated voltage: 100–230 V.A.C. (Supports international voltages up to 250 V.A.C.)
• Rated current: 7.0–3.0 A
• Rated power: 700 W max
• Rated frequency: 50/60 Hz
• Max. ambient temperature, Ta: 40° C (104° F)
• Max. exterior surface temperature: 200° C (392° F)
• Power factor: 0.96 @ 230 V/50 Hz,
0.99 @ 100 V/60 Hz
• Max. winding temperature, Tw: 130° C (266° F)
• Max. capacitor temperature, Tc: 85° C (185° F)
13.5 in
343 mm
18.8 in
477 mm
11. 6 in
294 mm
12.5 in
319 mm
5.1 in
12.2 in
131 mm
16 mm
.6 in
309 mm
733 mm
28.9 in
499 mm
19.6 in
[66.95]
[29.44]
19.08 [484.71]
23.03 [584.91]
1.16
2.64
Figure 1-1 Studio Spot 575Z/575CMY Zoom physical dimensions