HIK VISION DS-2TP21B-6AVFW User manual

How to get video stream of Thermographic
Handheld Camera through UVC protocol

Test Information
Model: DS-2TP21B-6AVF/W
Firmware Version: V5.4.32 build200921 (The Screen Mode feature is only
supported for this version and above)
Test Software/Platform: Potplayer on a Window 10-based platform PC
Test steps
1. Go to Local Settings >> Device Settings and turn on the Screen Mode;
2. The device is connected to the computer via USB cable;
3. Open the PotPlayer player software;
4. F5 shortcut key to enter the parameter selection interface, configure
"Camera >> Video Recording Device", set the format to MJPG640 480 30, and
exit after confirming;

5. ctrl+J shortcut key to preview;

6. ctrl+F1 shortcut key to view playback information;
7. After manual shutdown and restart, repeat steps 2~6;
Notes:
1. For Step 2: After the device is connected to the computer via the USB cable,
the camera can be recognized in the computer device management;
2. For Step 5: Use PotPlayer to preview normally;
3. For Step 6: the current frame rate in the playback information is stable at
about 25fps;
4. For Step 7: the function of device is normal, and the customer could use
this feature to display video stream on other devices that support this feature
through UVC protocol.