HIK VISION NETWORK CAMERA User manual

NETWORK CAMERA
User Manual
V2.0.0
2009-8

Thank you for purchasing our product. If there are any questions, or requests, please
do not hesitate to contact the dealer.
This manual applies to DS-2CD802/812/892PF(NF)(-E)(-W), DS-2CD832F(-E),
DS-2CD802/812/892P(N)-IR1(IR3)(IR5), DS-2CD702/712/792PF(NF)(-E), DS-2CD732F(-E),
DS-2CD862MF-E, DS-2CD852MF-E, DS-2CD762MF-FB(H), DS-2CD752MF-FB(H),
DS-2CD752MF(-E), DS-2CD852F series Network Camera
This manual may contain several technical incorrect places or printing errors, and the
content is subject to change without notice. The updates will be added to the new
version of this manual. We will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of
the security or signaling aspects of this product. UL has only tested for fire, shock or
casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the security or signaling
aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF
ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

User Manual of Network Camera
1
1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings
Follow these safeguards to
prevent serious injury or death.
Cautions Fol
low these precautions to
prevent potential injury or material
damage.
Warnings
1. In the use of the product, you must strictly comply with the electrical safety regulations of the
nation and region.
2. Source with AC 24V or DC 12V according to the IEC60950－1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

User Manual of Network Camera
2
2
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use a
clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the CCD from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of CCD at the
same time.
5. The CCD may be burned out by a laser beam, so when any laser equipment is being used, make
sure that the surface of the CCD will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating temperature
should be between -10°C ~+60°C), dusty or damp locations, and do not expose it to high
electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating environment.
8. Keep the camera away from liquids.
9. While shipping, the camera should be packed in its original packing, or packing of the same
texture.
10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be
replaced regularly according to their average life time. The average time varies because of
differences between operating environment and usage history, so regular checking is
recommended for all users. Please contact with your dealer for more details.

User Manual of Network Camera
3
3
Index
Chapter 1 Introduction................................................................................................................................................. 1
1.1 Network camera Functions and Features....................................................................................................... 1
1.2 Applications................................................................................................................................................... 2
Chapter 2 Installation................................................................................................................................................... 3
2.1 Panels Description......................................................................................................................................... 3
2.1.1 Side Elevation of the Camera ............................................................................................................. 3
2.1.2 Rear Panel Description ....................................................................................................................... 5
2.2 Product Installation........................................................................................................................................ 8
2.2.1 Box camera Installation...................................................................................................................... 8
2.2.2 Dome camera Installation................................................................................................................... 9
2.2.3 Vandal proof Dome camera Installation............................................................................................ 10
2.2.4 Topological graph of network camera .............................................................................................. 12
2.3 Client Software Installation......................................................................................................................... 13
Chapter 3 Parameter Configuration........................................................................................................................... 16
3.1 Visit Network Camera in LAN.................................................................................................................... 16
3.2 Configuration via Web browser................................................................................................................... 17
3.3 Configuration via Client Software............................................................................................................... 20
3.4 Visit Network Camera in Internet................................................................................................................ 26
3.4.1 Visit network camera with static IP .................................................................................................. 26
3.4.2 Visit network camera with dynamic IP............................................................................................. 27
Chapter 4 Menu Introduction..................................................................................................................................... 31
4.1 Main Menu .................................................................................................................................................. 31
4.2 Menu Introduction of 2.0 Megapixels CMOS Network Camera................................................................. 32
4.2.1 Language settings ............................................................................................................................. 32
4.2.2 Flicker Control.................................................................................................................................. 32
4.2.3 Resolution settings............................................................................................................................ 32
4.2.4 Frame settings................................................................................................................................... 33
4.2.5 Shutter settings.................................................................................................................................. 33
4.2.6Auto Gain settings............................................................................................................................. 34
4.2.7 DAY / NIGHT Settings..................................................................................................................... 34
4.2.8 White Balance Settings..................................................................................................................... 35
4.2.9 Effect Mode settings......................................................................................................................... 35
4.2.10 Mirror mode settings....................................................................................................................... 36
4.2.11 ePTZ settings .................................................................................................................................. 37
4.3 Menu Introduction of 1.3Megapiixels CCD Network Camera.................................................................... 37
4.3.1 Language settings ............................................................................................................................. 38
4.3.2 Resolution settings............................................................................................................................ 38
4.3.3 Frame settings................................................................................................................................... 38
4.3.4 Lens settings ..................................................................................................................................... 38
4.3.5 Shutter............................................................................................................................................... 39
4.3.6Auto Gain settings............................................................................................................................. 39
4.3.7 DAY / NIGHT Settings..................................................................................................................... 39

User Manual of Network Camera
4
4
4.3.8 White Balance Settings..................................................................................................................... 40
4.3.9 BACKLIGHT COMPENSATION.................................................................................................... 41
4.3.10 Mirror mode settings....................................................................................................................... 42
Appendix 1 SADP Introduction................................................................................................................................. 44
Appendix 2 Port Map ................................................................................................................................................ 46
Appendix 3 Pin Definition......................................................................................................................................... 48
Appendix 4 Product Specification............................................................................................................................. 49
DS-2CD862MF-E.............................................................................................................................................. 49
Specification.............................................................................................................................................. 49
Dimension.................................................................................................................................................. 50
DS-2CD852MF-E.............................................................................................................................................. 51
Specification.............................................................................................................................................. 51
Dimension.................................................................................................................................................. 52
DS-2CD762MF-FB ........................................................................................................................................... 53
Specification.............................................................................................................................................. 53
Dimension.................................................................................................................................................. 55
DS-2CD752MF-FB ........................................................................................................................................... 56
Specification.............................................................................................................................................. 56
Dimension.................................................................................................................................................. 58
DS-2CD752MF-E.............................................................................................................................................. 59
Specification.............................................................................................................................................. 59
Dimension.................................................................................................................................................. 60
DS-2CD852F..................................................................................................................................................... 61
Specification.............................................................................................................................................. 61
Dimension.................................................................................................................................................. 62

User Manual of Network Camera
1
1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux
operation system and the latest Davinci hardware platform of TI, the system operates with high
scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product
small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Network Function :support the TCP/IP protocols(TCP/IP,HTTP,DHCP,DNS,RTSP RTCP,PPPoE,
Furthermore,FTP,SMTP,NTP,SNMP addible),and IE browsing.
Heartbeat Function: The server can acquire real time operating performance of the network
camera through the heartbeat function.
Alarm Function: The product includes 1 channel of alarm signal input and 1 channel of alarm
on/off output, and supports motion detection, video missing, mask alarm and external alarm
input.(Get details in Specification)
Voice Talking：Support bidirectional voice talking and monomial voice broadcasting.
User Management: Support multilevel right management. The administrator can create up to
15 separate users with different right levels, which highly improves the system security.
The product offers a 10M/100M self-adaptive Ethernet interface.
Support set the parameters, browses real time videos or checks the camera performance
through software or IE, and gets external alarming and stores the compressed bit rate through
network.
Support remote upgrades and maintenance.
RS-485 supports monomial transparent channel function so that clients on remote PC can
control the serial devices.
Compression Functions:
Support 1 channel video signal and 25fps in Pal (704 × 576) ,30fps in NTSC (704 × 480) real time
H.264 or MPEG-4 video Encoding standard compression, which supports both variable bit rate
and variable frame rate; besides, you can self-define both the video quality and its compressed
bit rate.
Support resolution of 4CIF (PAL:704 × 576, NTSC:704 × 480), DCIF (PAL:528 × 384, NTSC:528 ×
320), 2CIF (PAL:704 × 288, NTSC:704 × 240), CIF (PAL:352 × 288, NTSC:352 × 240),QCIF (PAL:176
× 144, NTSC:176 × 120).
Support resolution up to 1600×1200 Pixels for 2.0 megapixels Network Camera.
Support resolution up to 1280×960 Pixels for 1.3 megapixels Network Camera.

User Manual of Network Camera
2
2
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP / IP, HTTP, DNS, RTP / RTCP, PPPoE protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and get external alarming and store the compressed bit rate through network.
Support remote upgrades and maintenance.
RS-485 supports monomial transparent channel function so that clients on remote PC can
control the serial devices.
Support NAS storage.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for ATM, bank counters, supermarkets and factories.
2. Remote surveillance for nursing homes, kindergartens and schools.
3. AI janitors.
4. AI building/district management systems.
5. Self-service systems of power plants.
6. Outdoor monitoring systems for bridges, tunnels and crossroad traffic.
7. Pipelining and warehouse monitoring.
8. 24-hour monitoring for road traffic.
9. Remote monitoring of forest and water resources.
10. Surveillance for airdrome, railway station, bus stop etc.

User Manual of Network Camera
3
3
Chapter 2 Installation
Notes：
1. Please check if all the items on the package list have been included with your camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. If the product does not operate properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. Users are responsible for any
problem caused by modification or repairing without authorization.
2.1 Panels Description
2.1.1 Side Elevation of the Camera
Fig 2.1.1 Side Elevation of DS-2CD852MF-E and DS-2CD852F network camera
Fig 2.1.2 Side Elevation of DS-2CD862MF-E network camera

User Manual of Network Camera
4
4
Fig 2.1.3 Side Elevation of DS-2CD752MF-E network camera
Fig 2.1.4 Side Elevation of DS-2CD752MF-FB DS-2CD762MF-FB network camera

User Manual of Network Camera
5
5
2.1.2 Rear Panel Description
Fig. 2.1.4 Rear Panel of DS-2CD852F series
1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).
2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ.
3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω.
4. 1 channel alarm output (1A 1B). 1 channel alarm input signal (IN,G). RS-485 bus interface
(T＋T-).
5. SD card slot (Support SDHC ).
6. Power supply interface of 12VDC, ±10%.
Fig. 2.1.6 Rear Panel of DS-2CD852MF-E, DS-2CD862MF-E network camera
1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).

User Manual of Network Camera
6
6
2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ.
3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω.
4. SDHC card slot (Support SDHC ).
5. 1 channel alarm input signal.
6. 1 channel alarm output (1A 1B). Please refer to Section 2.3.2 for pin definition. (The external
series-wound power should be under 12V DC/ 30mA).
7. RS-485 bus interface (T+ T-).
8. Standard BNC for 1 channel video output.
9. GND.
10. Power supply indicate lamp.
11. Power supply interface of AC24V or DC12V.
Fig. 2.1.7 Rear Panel of DS-2CD752MF-E series
Address& protocols dial switch, define for dial switch: , from 1 to 5 dial switch
function as follows:
Switch Function ON OFF
1 SHARP SOFT
2 AES AI
3 BLC OFF
4 FL ON
5 NAGC SAGC

User Manual of Network Camera
7
7
Notices: There are invalid dial switches for DS-2CD702, DS-2CD712, DS-2CD792, DS-2CD732 series
from 6 to 10;
1. SD card slot：Supports SDHC card, and the dimensions of SD meet the market’s normal
standard.
2. Fixed Screw: Loosen this screw to rotate the camera horizontally and vertically to
adjust the pan and tilt position. When the camera angle is determined, lock the fixed screw to
fix the camera.
3. Video cable slot: The analog output is not as high definition as network output. The
analog video output is just for testing when something unexpected happens.
4. Ethernet Interface:
The Ethernet interface is a RJ45 10M / 100M self-adapted Ethernet port. And the three
indicate LED’s respectively mean transmission and receipt status, link status and power status.
5. Cable Hole: User can select a cable hole from the side or bottom of the camera to
thread the cables. When selecting one direction to thread the cable, please cover the other

User Manual of Network Camera
8
8
cable hole with a waterproof plug.
6. Lens:
First, loosen the zoom lock handle, rotate it until there is an appropriate view angle between
TELE and WIDE, then tighten the handle.
Loosen the focus lock handle, rotate it until getting a clear image between NEAR and FAR,
then tighten the handle.
2.2 Product Installation
2.2.1 Box camera Installation
Box camera can be fixed in both metope and ceiling. Customers can choose whichever way
according to their specific needs. Please follow the steps below:(Take fixing in ceiling as an example,
fixing in metope follows the same rule).Choose the fixing method and fix the camera bracket
accordingly. If it is metope, then you need to fix the expand bolt (note: the mounting hole of the
expand bolt should align with the bracket) before fixing the bracket. If the wall surface is wooden,
the first step can be ignored and you can use the self-tapping screw to directly fix the bracket.
Please note that the metope on which the camera is fixed should be able to bear at least three
times the weight of the bracket and the camera.

User Manual of Network Camera
9
9
Fig 2.2.1 Fix Ceiling Bracket Fig 2.2.2 Fix Camera
Fig 2.2.3 Fix Lens
2.2.2 Dome camera Installation
Dome camera can be installed include hold equipment, ceiling mounted, cylinders and other styles.
Client can be installed in accordance with their own ways to achieve the installation.Please
according the following specific steps to install (take ceiling mounted as example), when the wall is
wood, use the self-tapping screws to fix the ceiling plate to the wall surface.

User Manual of Network Camera
10
10
Fig 2.2.4 Fix card Fig 2.2.5 Fix in Ceiling
Take the three columns of Dome camera insert in the three fix slot of the ceiling plate. Pay attention
to the direction of insertion. Let the ceiling plate “I” logo and the Dome camera “I” logo in the same
direction. Meanwhile, make the Dome camera along the counterclockwise Rotate 15 degrees until
the switch to the fixed date. At the same time, the “I” signs on the Dome camera and the locking
screw on the ceiling plate is alignment. Then screw down the locking screw on the Ceiling plate.
Fig 2.2.6 Dome camera fixing Fig 2.2.7 Dome camera fixed
2.2.3 Vandal proof Dome camera Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the following steps:
1. First, loosen the screw with a hexagonal Screw driver (attached with the camera), and take down the

User Manual of Network Camera
11
11
transparent cover shown as below:
Fig. 2.2.8 Unload the Cover
2. Use the screws to fix the dome camera on the ceiling.
Fig. 2.2.9 Install the Camera
3. Adjust the camera’s view angle while watching the video on the adjustment monitor.
Loosen the fixed screws, and adjust horizontally and vertically the camera pan and tilt. Adjust the lens focus to
get optimal video effect.
4. Tighten the screw after adjusting camera’s view angle, and cover the transparent casing.

User Manual of Network Camera
12
12
Fig. 2.2.10 Install the Cover
2.2.4 Topological graph of network camera
Megapixels Network Box Camera Application:
Megapixels Network Dome Camera Application:

User Manual of Network Camera
13
13
Notice:
Fig 2.1.12 Alarm output
The alarm output is an on/off output that requires external power supply on connection. The
external power supply shall be 12V DC/30mA, or use AC with external relays. Equipment damage or
electric shock may cause if without relays.
2.3 Client Software Installation
Note:
It is recommended that user’s computer adopted INTEL P3, P4, C4, Core4 CPU, and well-known
brands (Asus, Gigabyte, MSI, ECS, and INTEL etc.)Intel chipset motherboard, to ensure the stability
of the system. Tested the following models of the current graphics cards support the software
installed,ATIRadeonX1650,X1600,X1550,X1300,X800,X600,X550,HD2400,HD2600,NVIDIA GeForce
8600GT,8500GT,8400GS,7600,7300LE,6600LE,6200LE,INTEL915/945G, pay attention to graphics
driver must support hardware scaling function.
Step1: Double click ‘Client software 4000 (v2.0)’ in the Windows Operating System. The ‘Preparing
Setup’ dialog box will pop up automatically;

User Manual of Network Camera
14
14
Fig.2.3.1 Client Software Installation
Step2: Input “User Name”, “Company Name”;
Fig.2.3.2 Customer Information
Step3: Select the destination folder and click ‘Next’ to go to the next step.