HIK VISION iDS-TCV507-BIR/1550 Instruction sheet

Network Trac Camera
Conguraon Manual

Iniaves on the Use of Video Products
Thank you for choosing Hikvision products.
Technology aects every aspect of our life. As a high-tech company, we are increasingly aware of
the role technology plays in improving business eciency and quality of life, but at the same me,
the potenal harm of its improper usage. For example, video products are capable of recording
real, complete and clear images. This provides a high value in retrospect and preserving real-me
facts. However, it may also result in the infringement of a third party's legimate rights and
interests if improper distribuon, use and/or processing of video data takes place. With the
philosophy of "Technology for the Good", Hikvision requests that every end user of video
technology and video products shall comply with all the applicable laws and regulaons, as well as
ethical customs, aiming to jointly create a beer community.
Please read the following iniaves carefully:
●Everyone has a reasonable expectaon of privacy, and the installaon of video products should
not be in conict with this reasonable expectaon. Therefore, a warning noce shall be given in
a reasonable and eecve manner and clarify the monitoring range, when installing video
products in public areas. For non-public areas, a third party's rights and interests shall be
evaluated when installing video products, including but not limited to, installing video products
only aer obtaining the consent of the stakeholders, and not installing highly-invisible video
products.
●The purpose of video products is to record real acvies within a specic me and space and
under specic condions. Therefore, every user shall rst reasonably dene his/her own rights in
such specic scope, in order to avoid infringing on a third party's portraits, privacy or other
legimate rights.
●During the use of video products, video image data derived from real scenes will connue to be
generated, including a large amount of biological data (such as facial images), and the data could
be further applied or reprocessed. Video products themselves could not disnguish good from
bad regarding how to use the data based solely on the images captured by the video products.
The result of data usage depends on the method and purpose of use of the data controllers.
Therefore, data controllers shall not only comply with all the applicable laws and regulaons and
other normave requirements, but also respect internaonal norms, social morality, good
morals, common pracces and other non-mandatory requirements, and respect individual
privacy, portrait and other rights and interests.
●The rights, values and other demands of various stakeholders should always be considered when
processing video data that is connuously generated by video products. In this regard, product
security and data security are extremely crucial. Therefore, every end user and data controller,
shall undertake all reasonable and necessary measures to ensure data security and avoid data
leakage, improper disclosure and improper use, including but not limited to, seng up access
Network Trac Camera Conguraon Manual
i

control, selecng a suitable network environment (the Internet or Intranet) where video
products are connected, establishing and constantly opmizing network security.
●Video products have made great contribuons to the improvement of social security around the
world, and we believe that these products will also play an acve role in more aspects of social
life. Any abuse of video products in violaon of human rights or leading to criminal acvies are
contrary to the original intent of technological innovaon and product development. Therefore,
each user shall establish an evaluaon and tracking mechanism of their product applicaon to
ensure that every product is used in a proper and reasonable manner and with good faith.
Network Trac Camera Conguraon Manual
ii

Legal Informaon
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
Network Trac Camera Conguraon Manual
iii

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Network Trac Camera Conguraon Manual
iv

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Network Trac Camera Conguraon Manual
v

Contents
Chapter 1 Applicaon Mode Conguraon ................................................................................. 1
1.1 Set Checkpoint Capture ......................................................................................................... 1
1.1.1 Set Checkpoint Single I/O .............................................................................................. 1
1.1.2 Set RS-485 Radar ........................................................................................................... 4
1.1.3 Set Mixed-Trac Lane ................................................................................................... 8
1.2 Set Intersecon Violaon System Capture ........................................................................... 12
1.3 Set Smart Monitoring Capture ............................................................................................. 15
1.4 Set License Plate Recognion System Capture .................................................................... 18
1.5 Set Applicaon Mode Detailed Parameters ......................................................................... 20
1.5.1 Set Violaon and Incident Detecon .......................................................................... 20
1.5.2 Set Linked Lane Parameters ........................................................................................ 24
1.5.3 Set Connuous Capture Parameters ........................................................................... 25
1.5.4 Set Scene Mode .......................................................................................................... 26
1.5.5 Calibrate Speed via Video ........................................................................................... 27
1.5.6 Set Radar Parameters .................................................................................................. 28
1.5.7 Set Violaon Recording Parameters ............................................................................ 29
1.5.8 Set Supplement Light Linkage ..................................................................................... 30
1.5.9 Set Lane Speed Limit Parameters ................................................................................ 30
1.5.10 Set Trac Light Detecon Parameters ...................................................................... 31
1.6 Set Capture Schedule ........................................................................................................... 33
1.7 Set Capture Parameters ....................................................................................................... 34
1.7.1 Set Captured Image Parameters ................................................................................. 34
1.7.2 Set License Plate Recognion Parameters .................................................................. 36
1.7.3 Set Supplement Light Parameters ............................................................................... 36
1.7.4 Set Picture Composion .............................................................................................. 39
1.7.5 Set Informaon Overlay .............................................................................................. 40
Network Trac Camera Conguraon Manual
vi

1.7.6 Set Body Picture Mang ............................................................................................ 44
1.7.7 Set Trac Light ............................................................................................................ 45
1.7.8 Set Vehicle Feature Parameters .................................................................................. 48
1.7.9 Set Image Encoding Parameters .................................................................................. 49
1.8 Set Barrier Gate Linkage ....................................................................................................... 49
1.8.1 Set Allowlist and Blocklist ........................................................................................... 50
1.8.2 Control Barrier Gate .................................................................................................... 51
1.8.3 Set Wiegand Parameters ............................................................................................. 52
Chapter 2 Radar Detecon ........................................................................................................ 53
2.1 Set Detecon Parameters .................................................................................................... 53
2.2 Set Radar Calibraon ........................................................................................................... 55
2.2.1 Manual Calibraon ...................................................................................................... 56
2.2.2 Auto Calibraon .......................................................................................................... 57
2.3 Search Detected Vehicles ..................................................................................................... 58
Chapter 3 View Real-Time Picture ............................................................................................. 60
Chapter 4 Search Picture .......................................................................................................... 62
Chapter 5 View Trac Stascs ................................................................................................ 63
5.1 View Real-Time Trac Stascs .......................................................................................... 63
5.2 View Trac Flow Stascs ................................................................................................... 63
Chapter 6 View Trac Light Status ............................................................................................ 64
Network Trac Camera Conguraon Manual
vii

Chapter 1 Applicaon Mode Conguraon
Note
●The supported applicaon modes vary with dierent models. The actual device prevails.
●If the applicaon mode supports area drawing, you can check Display All Areas to display all the
lines and areas, convenient to view the eect of all the lines and areas. If you uncheck it, only
the current selected lane will be displayed, convenient to draw the current lane.
Cauon
You can click Default to restore all the set parameters to the default sengs. Please operate with
care.
1.1 Set Checkpoint Capture
1.1.1 Set Checkpoint Single I/O
Set checkpoint single I/O if capture is triggered by external I/O signal (digital signal). In this mode,
the informaon including the vehicle passing me, vehicle overview, license plate number, license
plate color, vehicle color (only supported for the Middle East version), the facial features of the
driver and the front passenger, etc. will be recorded.
Before You Start
Connect F+ of the I/O signal to the T interface of the device, and F- to the GND of the device.
Steps
1. Go to Conguraon → Capture → Applicaon Mode .
2. Select Trigger Mode as Checkpoint Single I/O.
Network Trac Camera Conguraon Manual
1

Figure 1-1 Set Checkpoint Single I/O
3. Oponal: Select the violaon type(s) to be detected, and set the corresponding parameters.
Refer to Set Violaon and Incident Detecon for details.
4. Set scene and mode parameters. Refer to Set Scene Mode for details.
5. Check the corresponding External Input according to the connected I/O signal.
Note
Each input corresponds to one lane.
6. Oponal: Check Occupy Emergency Lane Capture if you want to detect the violaon of
occupying emergency lane.
7. Set the lane parameters. Refer to Set Linked Lane Parameters for details.
8. Set the parameters below.
Level Status
Network Trac Camera Conguraon Manual
2

Capture is triggered according to the level signal status. If you select Falling Edge, the device
will trigger capture at the moment that the high level falls to low level. If you select Rising
Edge, the device will trigger capture at the moment that the low level rises to high level.
Capture Interval
Select Time, and set Interval (the me between the adjacent captures).
Capture Pictures
The number of captured picture(s).
9. Oponal: Link supplement light(s) to the specic lane(s). Refer to Set Supplement Light Linkage
for details.
10. Oponal: Check the other external input channel(s) to copy the same sengs.
11. Draw lane lines.
1) Click Draw Lane Line.
Note
The system will capture a picture and use it as the background. You can also check Video
Background to use the live view as the background.
2) Select the default lane line and right border line, and drag the two end points of the line or
drag the whole line to adjust its posion according to the actual scene.
3) Click OK.
Network Trac Camera Conguraon Manual
3

Figure 1-2 Draw Lane Line
12. Click Save.
1.1.2 Set RS-485 Radar
Set RS-485 radar if RS-485 signal (speed detecon or capture via radar) is connected, and capture is
triggered by radar. In this mode, the informaon including the vehicle speed, vehicle passing me,
vehicle overview, license plate number, license plate color, vehicle color, the facial features of the
driver and the front passenger, etc. will be recorded.
Before You Start
●Install the radar.
●Connect the D+ and D- of the radar RS-485 interface to the D+ and D- of the device RS-485
interface.
Network Trac Camera Conguraon Manual
4

Steps
1. Go to Conguraon → Capture → Applicaon Mode .
2. Select Trigger Mode as RS-485 Radar.
Network Trac Camera Conguraon Manual
5

Figure 1-3 Set RS-485 Radar
Network Trac Camera Conguraon Manual
6

3. Oponal: Select the violaon type(s) to be detected, and set the corresponding parameters.
Refer to Set Violaon and Incident Detecon for details.
4. Set scene and mode parameters. Refer to Set Scene Mode for details.
5. Set the lane parameters. Refer to Set Linked Lane Parameters for details.
6. Set connuous capture parameters. Refer to Set Connuous Capture Parameters for details.
7. Set speed limit parameters. Refer to Set Lane Speed Limit Parameters for details.
8. Link supplement light(s) to the specic lane(s). Refer to Set Supplement Light Linkage for details.
9. Set radar parameters. Refer to Set Radar Parameters for details.
10. Oponal: Check the other lane(s) to copy the same sengs.
11. Draw lane lines.
1) Click Draw Lane Line.
Note
The system will capture a picture and use it as the background. You can also check Video
Background to use the live view as the background.
2) Select the default lane lines and right border line, and drag the two end points of the line or
drag the whole line to adjust its posion according to the actual scene.
3) Click OK.
Network Trac Camera Conguraon Manual
7

Figure 1-4 Draw Lane Line
12. Click Save.
1.1.3 Set Mixed-Trac Lane
Set mix-trac lane if capture is triggered by virtual coils (video or radar detecon). In this mode,
the informaon including the vehicle speed, vehicle passing me, vehicle overview, license plate
number, license plate color, vehicle color, the facial features of the driver and the front passenger,
etc. will be recorded.
Before You Start
●Install the radar if speed detecon is needed.
●Connect the D+ and D- of the radar RS-485 interface to the D+ and D- of the device RS-485
interface.
Network Trac Camera Conguraon Manual
8

Steps
1. Go to Conguraon → Capture → Applicaon Mode .
2. Select Trigger Mode as Mixed-Trac Lane.
Network Trac Camera Conguraon Manual
9

Figure 1-5 Set Mixed-Trac Lane
Network Trac Camera Conguraon Manual
10

3. Oponal: Select the violaon type(s) to be detected, and set the corresponding parameters.
Refer to Set Violaon and Incident Detecon for details.
4. Set connuous capture parameters. Refer to Set Connuous Capture Parameters for details.
5. Set scene and mode parameters. Refer to Set Scene Mode for details.
6. Set the lane parameters. Refer to Set Linked Lane Parameters for details.
7. Oponal: Set violaon recording parameters. Refer to Set Violaon Recording Parameters for
details.
8. Set speed limit parameters. Refer to Set Lane Speed Limit Parameters for details.
9. Link supplement light(s) to the specic lane(s). Refer to Set Supplement Light Linkage for details.
10. Set radar parameters. Refer to Set Radar Parameters for details.
11. Oponal: Check the other lane(s) to copy the same sengs.
12. Draw lane lines.
1) Click Draw Lane Line.
2) Set the property of the lane lines.
3) Select the default lane lines, right border line, and trigger line, and drag the two end points
of the line or drag the whole line to adjust its posion according to the actual scene.
4) Click OK.
Network Trac Camera Conguraon Manual
11

Figure 1-6 Draw Lane Line
13. Click Save.
1.2 Set Intersecon Violaon System Capture
Set video analysis intersecon violaon system if capture is triggered by virtual coils. In this mode,
the informaon including the violaon informaon, vehicle passing me, vehicle overview, license
plate number, license plate color, vehicle color, etc. will be recorded.
Steps
1. Go to Conguraon → Capture → Applicaon Mode .
2. Select Trigger Mode as Video Analysis E-Police.
Network Trac Camera Conguraon Manual
12