HIK VISION DS-2TD1228T-2/QA User manual

Thermal & Optical Bi-spectrum Network
Camera
User Manual

Thermal & Optical Bi-spectrum Network Camera User Manual
i
Legal Information
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND
"WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

Thermal & Optical Bi-spectrum Network Camera User Manual
ii
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.

Thermal & Optical Bi-spectrum Network Camera User Manual
iii
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.

Thermal & Optical Bi-spectrum Network Camera User Manual
iv
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
●In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region.
Transportation
●Keep the device in original or similar packaging while transporting it.
●Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and the company shall not take any
responsibilities.
●DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic
interference.
Power Supply
●Please purchase the charger by yourself. Input voltage should meet the Limited Power Source
(12 VDC, 24 VAC, or PoE(802.3af)) according to the IEC62368 standard. Please refer to technical
specifications for detailed information.
●Make sure the plug is properly connected to the power socket.
●The socket-outlet shall be installed near the equipment and shall be easily accessible.
●DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
●DO NOT touch the bare metal contacts of the inlets after the circuit breaker is turned off.
Electricity still exists.
●+ identifies the positive terminal(s) of equipment which is used with, or generates direct current.
- identifies the negative terminal(s) of equipment which is used with, or generates direct
current.
Battery
●Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions. Il y a risque d'explosion si la batterie est remplacée par une
batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux
instructions.
●The built-in battery cannot be dismantled. Please contact the manufacture for repair if
necessary.
●For long-term storage of the battery, make sure it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
●This equipment is not suitable for use in locations where children are likely to be present.
●Improper replacement of the battery with an incorrect type may defeat a safeguard (for

Thermal & Optical Bi-spectrum Network Camera User Manual
v
example, in the case of some lithium battery types).
●DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,
which may result in an explosion.
●DO NOT leave the battery in an extremely high temperature surrounding environment, which
may result in an explosion or the leakage of flammable liquid or gas.
●DO NOT subject the battery to extremely low air pressure, which may result in an explosion or
the leakage of flammable liquid or gas.
Installation
●Never place the equipment in an unstable location. The equipment may fall, causing serious
personal injury or death.
●This equipment is for use only with corresponding brackets. Use with other (carts, stands, or
carriers) may result in instability causing injury.
System Security
●You acknowledge that the nature of Internet provides for inherent security risks, and our
company shall not take any responsibilities for abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker attack, however, our company will provide timely
technical support if required.
●Please enforce the protection for the personal information and the data security as the device
may be confronted with the network security problems when it is connected to the Internet.
Please contact us when the device might exist network security risks.
●Please understand that you have the responsibility to configure all the passwords and other
security settings about the device, and keep your user name and password.
Maintenance
●If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
●To reduce the risk of fire, replace only with the same type and rating of fuse.
●The serial port of the equipment is used for debugging only.
Using Environment
●Make sure the running environment meets the requirement of the device. The operating
temperature shall be -40°C to 65°C (-40°F to 149°F), and the operating humidity shall be 95% or
less, no condensing.
●DO NOT expose the device to high electromagnetic radiation or dusty environments.
●DO NOT aim the lens at the sun or any other bright light.
●The equipment shall not be exposed to dripping or splashing and that no objects filled with

Thermal & Optical Bi-spectrum Network Camera User Manual
vi
liquids, such as vases, shall be placed on the equipment.
●No naked flame sources, such as lighted candles, should be placed on the equipment.
●Provide a surge suppressor at the inlet opening of the equipment under special conditions such
as the mountain top, iron tower, and forest.
●Burned fingers when handling the parts with symbol . Wait one-half hour after switching off
before handling the parts.
Emergency
●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various
countries or regions, including without limitation, the United States, European Union, United
Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authorities for any necessary export
license requirements if you intend to transfer, export, re-export the thermal series products
between different countries.

Thermal & Optical Bi-spectrum Network Camera User Manual
vii
Contents
Chapter 1 Legal Informationi
Chapter 1 Symbol Conventionsiii
Chapter 1 Safety Instructioniv
Chapter 1 Overview1
1.1 Brief Description1
1.2 Function1
Chapter 2 Device Activation and Accessing2
2.1 Activate the Device via SADP2
2.2 Activate the Device via Browser2
2.3 Login3
2.3.1 Plug-in Installation3
2.3.2 Illegal Login Lock4
Chapter 3 Temperature Measurement5
3.1 Notice5
3.2 Thermography Configuration Flow Chart6
3.3 Automatic Thermography8
3.3.1 Set Thermography Parameters8
3.3.2 Set Normal Mode9
3.3.3 Set Expert Mode10
3.3.4 Set Thermography Rule11
3.3.5 Point Thermography12
3.3.6 Line Thermography12
3.3.7 Area Thermography13
3.3.8 Set Shielded Region13
3.4 Manual Thermography13
Chapter 4 Fire Source Detection14
4.1 Recommended Scene14
4.2 Set Fire Detection Parameters14
Chapter 5 Behavior Analysis16
5.1 Flow Chart of Behavior Analysis16
5.2 Set VCA Parameters17
5.3 Calibration17
5.3.1 Calibrate Automatically17
5.3.2 Calibrate Manually18
5.3.3 Verify the Calibration Result19
5.4 Set Rules19
5.5 Advanced Configuration21
Chapter 6 Event and Alarm23

Thermal & Optical Bi-spectrum Network Camera User Manual
viii
6.1 Set Motion Detection23
6.1.1 Normal Mode23
6.1.2 Expert Mode24
6.2 Set Video Tampering Alarm25
6.3 Set Alarm Input26
6.4 Set Exception Alarm27
6.5 Detect Audio Exception27
Chapter 7 Arming Schedule and Alarm Linkage29
7.1 Set Arming Schedule29
7.2 Linkage Method Settings29
7.2.1 Trigger Alarm Output29
7.2.1.1 Manual Alarm30
7.2.1.2 Automatic Alarm30
7.2.2 FTP/NAS/Memory Card Uploading30
7.2.3 Send Email31
7.2.3.1 Set Email31
7.2.4 Notify Surveillance Center32
7.2.5 Trigger Recording32
7.2.6 Set Audible Alarm Output32
7.2.7 Set Flashing Alarm Light Output33
Chapter 8 Live View34
8.1 Live View Parameters34
8.1.1 Window Division34
8.1.2 Live View Stream Type34
8.1.3 Enable and Disable Live View34
8.1.4 Start Digital Zoom34
8.1.5 View Previous/Next Page35
8.1.6 Full Screen35
8.1.7 Light35
8.1.8 Wiper35
8.1.9 Lens Initialization35
8.1.10 Auxiliary Focus35
8.1.11 Quick Set Live View35
8.1.12 Lens Parameters Adjustment36
8.2 Set Transmission Parameters36
Chapter 9 Video and Audio38
9.1 Video Settings38
9.1.1 Stream Type38
9.1.2 Video Type38
9.1.3 Resolution39
9.1.4 Bitrate Type and Max. Bitrate39

Thermal & Optical Bi-spectrum Network Camera User Manual
ix
9.1.5 Video Quality39
9.1.6 Frame Rate39
9.1.7 Video Encoding39
9.1.7.1 H.26440
9.1.7.2 H.26540
9.1.7.3 MJPEG40
9.1.7.4 Profile40
9.1.7.5 I-Frame Interval40
9.1.7.6 SVC40
9.1.8 Smoothing41
9.1.9 Display VCA Info41
9.1.10 Audio Settings41
9.1.10.1 Audio Encoding41
9.1.10.2 Audio Input41
9.1.10.3 Environmental Noise Filter41
9.1.11 Two-way Audio42
9.1.12 Set ROI42
9.2 Display Settings43
9.2.1 Image Adjustment43
9.2.2 Image Adjustment (Thermal Channel)43
9.2.3 Exposure Settings44
9.2.4 Day/Night Switch44
9.2.5 Set Supplement Light44
9.2.6 BLC45
9.2.7 WDR45
9.2.8 White Balance45
9.2.9 DNR45
9.2.10 Defog46
9.2.11 Gray Scale46
9.2.12 Set Palette46
9.2.13 Set Target Color46
9.2.14 DDE47
9.2.15 Brightness Sudden Change47
9.2.16 Enhance Regional Image47
9.2.17 Mirror47
9.2.18 Video Standard48
9.2.19 Digital Zoom48
9.2.20 Scene Mode48
9.3 OSD48
9.4 Set Privacy Mask49
9.5 Overlay Picture49

Thermal & Optical Bi-spectrum Network Camera User Manual
x
9.6 Set Manual DPC (Defective Pixel Correction)50
9.7 Set Picture in Picture50
Chapter 10 Video Recording and Picture Capture51
10.1 Storage Settings51
10.1.1 Set Memory Card51
10.1.2 Set NAS51
10.1.3 Set FTP52
10.1.4 Set Cloud Storage53
10.2 Video Recording53
10.2.1 Record Automatically53
10.2.2 Record Manually55
10.2.3 Playback and Download Video55
10.3 Capture Configuration56
10.3.1 Capture Automatically56
10.3.2 Capture Manually56
10.3.3 View and Download Picture57
Chapter 11 Network Settings58
11.1 TCP/IP58
11.1.1 Multicast Discovery59
11.2 Port59
11.3 Port Mapping60
11.3.1 Set Auto Port Mapping60
11.3.2 Set Manual Port Mapping61
11.4 Multicast61
11.5 SNMP61
11.6 Access to Device via Domain Name62
11.7 Access to Device via PPPoE Dial Up Connection63
11.8 Enable Hik-Connect Service on Camera63
11.8.1 Enable Hik-Connect Service via Web Browser64
11.8.2 Enable Hik-Connect Service via SADP Software64
11.8.3 Access Camera via Hik-Connect65
11.9 Set ISUP65
11.10 Set Open Network Video Interface66
11.11 Set Alarm Host66
11.12 Set Alarm Server66
11.13 Set Network Service67
11.14 Set SRTP67
Chapter 12 System and Security69
12.1 View Device Information69
12.2 Search and Manage Log69
12.3 Import and Export Configuration File69

Thermal & Optical Bi-spectrum Network Camera User Manual
xi
12.4 Export Diagnose Information70
12.5 Reboot70
12.6 Restore and Default70
12.7 Upgrade70
12.8 View Open Source Software License71
12.9 Time and Date71
12.9.1 Synchronize Time Manually71
12.9.2 Set NTP Server71
12.9.3 Set DST72
12.10 Set RS-23272
12.11 Set RS-48572
12.12 Set Same Unit73
12.13 Security73
12.13.1 Authentication73
12.13.2 Security Audit Log74
12.13.2.1 Search Security Audit Logs74
12.13.3 Set IP Address Filter74
12.13.4 Set SSH75
12.13.5 Set HTTPS75
12.13.5.1 Create and Install Self-signed Certificate75
12.13.5.2 Install Authorized Certificate76
12.13.6 Set QoS76
12.13.7 Set IEEE 802.1X76
12.14 User and Account77
12.14.1 Set User Account and Permission77
Chapter 13 Appendix78
13.1 Common Material Emissivity Reference78
13.2 Device Command78
13.3 Device Communication Matrix79
13.4 FAQ79

Thermal & Optical Bi-spectrum Network Camera User Manual
1
Chapter 1 Overview
1.1 Brief Description
Thermal & Optical Bi-spectrum network camera equipped with built-in GPU which supports
intelligent behavior analysis algorithm, can realize high-precision VCA detection and real-time
alarm. It is applied to perimeter defense and fire-prevention purposes in critical infrastructures
such as community, villa, construction site, factory, 4S stores, and so on. The pre-alarm system
helps you discover unexpected events immediately and protects your property.
1.2 Function
This section introduces main functions of the device.
Note
Not all models support the configurations below, take the actual product for reference.
Fire Detection
Device can detect the dynamic fire source in the scene and output pre-alarm and alarm to protect
the property.
Temperature Measurement
Device can measure the actual temperature of the spot being monitored. The device alarms when
temperature exceeds the temperature threshold value.
VCA
Device can do behavior analysis. Multiple rules can be configured for different requirements.
Smoking Detection
Device can detect the smoking behavior and alarm.

Thermal & Optical Bi-spectrum Network Camera User Manual
2
Chapter 2 Device Activation and Accessing
To protect the security and privacy of the user account and data, you should set a login password
to activate the device when access the device via network.
Note
Refer to the user manual of the software client for the detailed information about the client
software activation.
2.1 Activate the Device via SADP
Search and activate the online devices via SADP software.
Before You Start
Access www.hikvision.com to get SADP software to install.
Steps
1. Connect the device to network using the network cable.
2. Run SADP software to search the online devices.
3. Check Device Status from the device list, and select Inactive device.
4. Create and input the new password in the password field, and confirm the password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
5. Click OK.
Device Status changes into Active.
6. Optional: Change the network parameters of the device in Modify Network Parameters.
2.2 Activate the Device via Browser
You can access and activate the device via the browser.
Steps
1. Connect the device to the PC using the network cables.
2. Change the IP address of the PC and device to the same segment.

Thermal & Optical Bi-spectrum Network Camera User Manual
3
Note
The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from
192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of
the PC to 192.168.1.100.
3. Input 192.168.1.64 in the browser.
4. Set device activation password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
5. Click OK.
6. Input the activation password to log in to the device.
7. Optional: Go to Configuration → Network → Basic → TCP/IP to change the IP address of the
device to the same segment of your network.
2.3 Login
Log in to the device via Web browser.
2.3.1 Plug-in Installation
Certain operation systems and web browser may restrict the display and operation of the device
function. You should install plug-in or complete certain settings to ensure normal display and
operation. For detailed restricted function, refer to the actual device.
Operating System
Web Browser
Operation
Windows
Internet Explorer 10+
Follow pop-up prompts to
complete plug-in installation.
Google Chrome 57+
Mozilla Firefox 52+
Click to
download and install plug-in.
Go to Configuration →
Network → Advanced
Settings → Network Service
to enable WebSocket or
WebSockets for normal view if

Thermal & Optical Bi-spectrum Network Camera User Manual
4
Operating System
Web Browser
Operation
plug-in installation is not
required. Display and
operation of certain functions
are restricted. For example,
Playback and Picture are not
available. For detailed
restricted function, refer to
the actual device.
Mac OS 10.13+
Mac Safari 12+
Plug-in installation is not
required.
Go to Configuration →
Network → Advanced
Settings → Network Service
to enable WebSocket or
WebSockets for normal view.
Display and operation of
certain functions are
restricted. For example,
Playback and Picture are not
available. For detailed
restricted function, refer to
the actual device.
Note
The device only supports Windows and Mac OS system and does not support Linux system.
2.3.2 Illegal Login Lock
It helps to improve the security when accessing the device via Internet.
Go to Configuration → System → Security → Security Service, and enable Enable Illegal Login
Lock. Illegal Login Attempts and Locking Duration are configurable.
Illegal Login Attempts
When your login attempts with the wrong password reach the set times, the device is locked.
Locking Duration
The device releases the lock after the setting duration.

Thermal & Optical Bi-spectrum Network Camera User Manual
5
Chapter 3 Temperature Measurement
When you enable this function, the device measures the actual temperature of the scene. It
alarms when temperature exceeds the temperature threshold value.
3.1 Notice
This part introduces the notices of configuring temperature measurement function.
●The target surface should be as vertical to the optical axis as possible. It is recommended that
the angle of oblique image plane should be less than 45°.
●The target image pixels should be more than 5 × 5.
●If multiple presets will be taken for temperature measurement, it is recommended to set the
patrol time above 20 s.
●Please select line thermography or area thermography for a certain area temperature
measurement. The point thermography is not recommended in case of deviation occurred
during device movement to affect the accuracy of temperature measurement.

Thermal & Optical Bi-spectrum Network Camera User Manual
6
3.2 Thermography Configuration Flow Chart
This part introduces the process of configuring temperature measurement.

Thermal & Optical Bi-spectrum Network Camera User Manual
7
Figure 3-1 Thermography Configuration Flow Chart

Thermal & Optical Bi-spectrum Network Camera User Manual
8
Note
Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart.
3.3 Automatic Thermography
Configure the temperature measurement parameters and temperature measurement rules. The
device can measure the actual temperature and output alarms when temperature exceeds the
alarm threshold value.
3.3.1 Set Thermography Parameters
Configure the parameters of temperature measurement.
Steps
1. Go to Configuration → Local, enable Display Temperature Info. .
Display Temperature Info.
Select Yes to display temperature information on live view.
Enable Rules to display the rules information on live view.
2. Click Save.
3. Go to Configuration → Temperature Measurement → Basic Settings to configure parameters.
Enable Temperature Measurement
Check to enable temperature measurement function.
Enable Color-Temperature
Check to display Temperature-Color Ruler in live view.
Display Temperature Info. on Stream
Check to display temperature information on the stream.
Display Max./Min./Average Temperature
Check to display maximum/minimum/average temperature information on live view when
the temperature measurement rule is line or area.
Position of Thermometry Info
Select the position of temperature information showed on the live view.
●Near Target: display the information beside the temperature measurement rule.
●Top Left: display the information on the top left of screen.
Add Original Data on Capture
Check to add data on alarm triggered capture of thermal channel.
Add Original Data on Stream