Hiland F6000 User manual

Room 803, Building 1, Xigang Development
Center, Sandun Town, Xihu District, Hangzhou
tel.: [phone]
[email protected] | https://www.hiland.cc/
LED Gate Flash lamp F6000 Ex Tax: $5.64
Technical data
Certification: CE
Color: Yellow
Flicker frequency: 1hz
IP Level: 54
Lamp: LED
Loading capacity: <3w
Product size: φ68* 120mm
Product weight: 112g
Working temperature: -20º～+60℃
Working voltage: 12-240VAC /DC
USER MAUNAL
LED Gate Flash lamp F6000

Room 803, Building 1, Xigang Development
Center, Sandun Town, Xihu District, Hangzhou
tel.: [phone]
[email protected] | https://www.hiland.cc/
I. Safety Instruction
1. For security, please read the user manual carefully before initial operation;
2. Please be sure the power is off before connecting, the product is produced without fuse;
3. This system must not endanger life or property during the running failure or its security risks have been eliminated
II. nbsp;Technical Specification
1. working voltage：12-240VAC /DC
2. Loading capacity：<3W

Room 803, Building 1, Xigang Development
Center, Sandun Town, Xihu District, Hangzhou
tel.: [phone]
[email protected] | https://www.hiland.cc/
3. Flicker Frequency：1HZ
4. Working temperature：-20º～+60℃
5. IP Level: IP54
6. Size：φ76* 125mm
III. Connecting Instruction
1. Port CN1 is for connecting the power input, working voltage is 12-240VAC/DC
2. Port CN2 is for connecting the antenna to extend the effective distance of controller
IV. Instructions
4.1 LED will flicker in 1HZ after power on
4.2 JP1 switch
It’s the switch for switching LED in flickering or lighting, When JP1 at flash, LED will flicker in 1Hz after power on, When JP1 at No flash,
LED will light after power on
https://www.hiland.cc/led-gate-flash-lamp-f6000-html