
item no: HD-SM
INSTR HD-SM V2.1: 08∙2016
INSTRUCTIONS FOR USE:
SPRAY MOP
The Hilway Direct Spray Mop includes the following:
Handle (A)
Lower Pole (B)
Mop Base (C)
Cleaning Pad (D)
Rellable Cartridge Bottle (E)
For Use On:
Polyurethane and factory nished wood, cork, bamboo, laminate
and vinyl. Do not use on waxed wood oors.
Mop Care:
Machine wash mop pad after each use and allow it to air dry. Do
not use fabric softener.
Store mop with cartridge bottle inserted.
™
™www.hilway.com
1-877-356-6748
Hilway Direct™
12 McCullough Dr, ste 10
New Castle, DE 19720
To Use Assembled Spray Mop:
1. Unscrew top of Cleaning Liquid Bottle (D) and ll bottle with
Hilway Direct Hardwood & Laminate Floor Cleaner (ready
to use). Replace bottle top and insert lled cartridge into
receptacle on lower pole.
2. Put mop pad, white side up, onto mop base. Press down
on mop base to secure velcro attachment.
3. Before mopping, sweep or vacuum oor to remove loose
dirt particles and debris.
4. To mop oor, pull trigger on spray mop handle (A) to
release cleaner and wipe oor with mop in a back and forth
motion. When possible wipe in the direction with the grain
of the oor. Work in small sections, approximately 4 ft x 4
ft, until oor is cleaned. Mopped area will air dry quickly. Do
not allow cleaner to dry on oor before wiping. Do not use
on waxed wood oors.
A. Handle
Mango
B. Lower Pole
Palo inferior
C. Mop base / Base para mopa
D. Cleaning Liquid Bottle
Botella de liquide de
limpieza
E. Cleaning pad / Almohadilla para limpieza
See reverse for assembly instructions.