HiMirror Slide User manual

Quick Start Guide
Power Adapter Quick Start Guide Warranty Card
HiMirror Slide
Back to previous page
Bring up the menu
Back
Function
Menu
Mirror / Light
Safety Lock –
Use Safety Lock to
lock up and keep
Slide Panel from
unexpected sliding.
Touch Key 2
Slide Panel – Slide the panel to the right to open
and use HiMirror Slide; slide it back to close and
use the panel as a mirror.
54
Switch between Mirror mode
and ambient makeup light
OVERVIEW
PACKAGE CONTENTS
Power Jack –
Connect HiMirror Slide to a power outlet
using the provided power adapter.
1
USB Port – Connect
with HiMirror Slide
supported peripheral
devices.
3
Stand –
Flip open the stand for HiMirror
Slide to stand.Hold the stand
and rotate HiMirror Slide
counterclockwise for videos or
supported apps.
Power Jack
Stand
High Sensitivity Microphone
High Resolution Camera Ambient Makeup Light
Serial Number
MAC
SN
High Performance SpeakerSlide Panel
Touch Key
Menu
Back
Mirror / Light
Power Button
Safety Lock
Rotating Disk
USB Port
Reset
*11" mirror size with 8" TFT LCD touch panel
W
A
R
N
I
N
G
!
F
R
A
G
I
L
E

Note:
1. Children under the age of 13 are not permitted to create a HiMirror account.
2. Make sure HiMirror Slide is placed on a flat and even surface.
HiMirror Slide must be constantly connected to your WiFi network
HiMirror Slide must be installed within the range of a WiFi network
BEFORE YOU START
For best results, make sure that the light sources around your HiMirror Slide are even and your face is not partially
shadowed. Please refer to the following instructions when the light source is not adequate for HiMirror Slide.
Light Source
A. Strong backlight, such as a large window.
Suggestion: Close the blinds or curtains.
C. Multiple light sources.
Suggestion: Leave only the light source in front of you and turn the other lights off.
B. Uneven indoor lighting, such as a light source shining on one side of your face.
Suggestion: Adjust the light's direction, or turn the light off.
Temperature / Humidity Operation: 5°~35°C; 30%~80% RH
Storage & Transportation: -20°C~60°C; 0~90% RH
OPTIMAL ENVIRONMENT CONDITIONS
1. Connect HiMirror Slide to a power outlet using the power adapter.*
2. Push the power button to turn on HiMirror Slide.
3. Slide the panel to the right to open and use HiMirror Slide.
4. Follow the on-screen instructions to complete setup.
GETTING STARTED
Note: HiMirror Slide must be plugged into a power outlet at all times.
*
Power Adapter Input AC: 100-240V~50/60Hz, 0.7A
Output DC: 12V/2A, 24W
HDBM5000X01