TasmanEco Maui User manual

RECYCLED
Assembly Instruction
Packaging and instructions
printed on recycled materials
Maui 3 Drawer Chest
Tasman Eco Pty Ltd abn. 58 106 988 578
4-6 Merr yvale Rd, Minto, NSW 2566
t. 02 9603 5000 f. 02 9603 7000
e. ser [e-mail] p.o.
box 5878 Minto, DC, NSW 2566
w.www.tasmaneco.com.au
This product has been independently tested and complied with:
Save the instructions for future reference.
Assembly of this furniture is best undertaken by two people.
AS/NZS 4935:2009 Domestic furniture -Free standing chests of drawers, wardrobes
and booksheleves/ Bookcase Determination of stability &AS/NZS 8124.3:2012 +A1:2016
Migration of certain elements.

Hardware List
Warning
Small parts can present choking hazard.Always keep small parts out of reach of children
both during and after assembly.Store any spare or unused parts in a safe place.
Assembly tips
for hardware
We recommend tightening all screws and connectors by hand.If using a
cordless driver,set the speed to a slow setting and the clutch to a low setting
to prevent excessive tightening that may result in damage to your furniture.
Screws Recheck tightness
Locking pin x 52 Camlock x 52
M4x25 Screw x 2
M6x35 Bolt x 20
Wall strap x 1
2
!"#$%&'$"( )** +,(("+$,- .,*$/0)$ *")/$ $1, 2,($'/ )3$"- )//"2.*%(& $'"
+'"/$45)/ /,2" +,(("+$,-/ 2)6 *,,/"( )/ $'" +'"/$ /"$$*"/78"-%,9%+)**6
+'"+: )** ,3 $'" +,(("+$,- /+-"1/ 2):%(& /;-" $'"6 )-" $%&'$7
!""#$ %#& '(
To avoid damage the chest, please use provided allen key only when you are assembling.

3
Parts checklist
Side panel x 2 Bottom base x 1 Top board x 1
Chest frame back panel x 2 Drawer front panel x 3
Drawer back panel x 3 Drawer side panel ( right ) x 3Drawer side panel ( left ) x 3
leg x 4
Drawer base panel x 3
Drawer support panel x 3
Front rail x 2

4
1Attach the legs on bottom base secure with
M6 x 35mm bolts. 2Fit locking pins to side panels.
3 4 Fit the top board & Bottom base to chest
frame secure with M6 x 35mm bolts.
M6x35 Bolt x 8
Locking pin x 16
M6x35 Bolt x 12
Camlock x 16
1 2 3
Attach the back side panel with side panels
secure with camlocks.

6Fit locking pins to the drawer back panels as well as the drawer side panels as per attached pictures.
Locking pin x 18
X3
X3
X3
5
5Tighten all bolts and screws by Allen key but do not over tighten.
!""#$ %#&

6
78Fit the drawer support panels to the drawer
back panel secure with camlocks.
9Insert base sliding into groves on
side panels. 10 Fit locking pins into the drawer front panels.
Camlock x 12 Camlock x 6
X3 X3
Locking pin x 18
X3
1 2 3
X3
!"# $"%& '()&*$ #+ %,(-&, .(/0
'()&* $&/1,& -"#2 /(3*+/0$4

7
11
12 Insert the runner on drawers into runners fixed into frame of the chest once aligned push drawers in.
Camlock x 18
X3
1 2 3
!"# $"%& '()&*$ #+ #,& %-(.&- /-+)# '()&* $&01-& ."#, 0(2*+03$4

8
Instruction for Wall Strap installation
Hardware List
A.2 x Self tapping screw B.1xWall strap
Step 1-
Screw Wall Strap to back of the chest with Self tapping screw(Supplied)
Back
Front Front
Please note:The wall fixing is not supplied,Please seek advice from your local
hardware supplier to ensure you purchase the correct wall fixing.
Wall
Step 2 Step 3
Wall
Step 3-
Ensure the wall strap is fixed into the wall securely.
Back
!"#$ %& '()*"*(+ ",# )"-.$ /0011 ",# 2#3" (3 *") *+"#+4#4 3*+.2 $()*"*(+ *+ (-4#- "( 5*6#
7(8 -((1 ",# )9-#: ",# :.22 )"-.$ *+"( ",# :.22;

9
Step 4-
Once you have completed step 3 then reposition the chest in its intended
position(Two people maybe required for this step):
Step 5-
The stallation of your wall strap is now completed
Wall
Wall

Guarantee & Warranty
.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The guarantee described below is in addition to the guarantee provided by law.
Note: In situations where a person purchases this product for the purpose of gifting to another, the recipient is considered to be the
original owner.
CONDITIONS:
1.The item is improperly assembled or adjusted and or not assembled strictly in accordance with the written instructions provided
by the seller in the box containing the item.
4.The item is transferred, gifted or disposed of by the original owner to another.
WARRANTY CLAIM PROCEDURE:
For warranty claims, please email us via our claims section on our website www.tasmaneco.com.au or visit the store where the
product was purchased.
Tasman Eco Pty Ltd ABN. 58 106 988 578
4-6 Merryvale Rd ,Minto ,NSW 2566
PH: 02 9603 5000 FAX: [phone]
w.www.tasmaneco.com.au
Email: [e-mail]
The replacement product will be identical to the originally purchase product wherever possible, though in situations where the
identical model is discontinued or out of stock, then Tasman Eco Pty Ltd will replace the product with amodel that is functionally
equivalent
This Guarantee is made to the purchaser and/or original owner only. For purposes of this Guarantee, the original owner is
considered to be the person who first makes use of the product.
2.There is damage to the product and that damage is deemed by Tasman Eco Pty Ltd to be caused by incorrect assembly, misuse
or by use or storage outside of the physical or environmental specifications of the product.
3.There are modifications to the product or to parts of the product that were not authorized in writing by Tasman Eco Pty Ltd.
The product must be returned to Tasman Eco Pty Ltd or to the place of purchase with proof of purchase, including date
and purchase price.
2YEAR MATERIALS AND WORKMANSHIP GUARANTEE
If within 2years of thedateof purchase of this product, there is found anydefect in materialsor workmanshipof this product,
Tasman Eco Pty Ltdwillreplace the product free of charge, subject to the conditionbelow:
The 2Year Material and Workmanship Guarantee will be void and nullified in circumstances where: