Hisense LCD3733EU User manual

LCD TV
Service Manual
Chassis：MS9
Product Type：LCD3733EU
LCD4033NEU
LCD4233EU
All manuals and user guides at all-guides.com

- 2 -
Contents
Contents ..................................................................................................................2
1. Product Safety Servicing Guidelines ..................................................................3
2. Product Function Specifications.........................................................................5
3. Lcd Panel Spec ....................................................................................................6
3-1 General Description..................................................................................6
3-2 General Features ......................................................................................6
4. Block Diagram.....................................................................................................8
4-1 Main board ..................................................................................................8
4-2 Power board of LCD3733EU .......................................................................9
4-3 Power board of LCD4033NEU/LCD4233EU ...............................................9
5. Service Mode And Adjustment .........................................................................10
6. Software Updating............................................................................................13
6-1、Updating Tool .........................................................................................13
6-2、Software Updating Operation................................................................14
7. Bill Of Materials.................................................................................................24
8. Troubleshooting................................................................................................29
9. Ciruit Diagram...................................................................................................29
All manuals and user guides at all-guides.com

- 3 -
1. Product Safety Servicing Guidelines
WARNING:
Service should not be attempted by anyone unfamiliar with the necessary
precaution on this receiver. The following are the necessary precaution to be
observed before serving this chassis.
1. Since the power supply circuit of this receiver is directly connected to the AC
power line, an Isolation transformer should be used during any dynamic
service to avoid possible shock hazard.
2. When replacing a chassis in the cabinet, always be certain that all the
protective devices are put back in place, such as:
non-metallic control knobs, insulating cover, shields, isolation
resistor-capacitor network etc.
3. When replacing parts or circuit boards, disconnect the power cord.
4. When replacing a high wattage resistor (oxide metal film resistor) on the
circuit board, keep the resistor (1/2in) away from circuit board.
5. Connection wires must be kept away from components with high voltage or
high temperature.
6. If any fuse in this LCD TV receiver is blown, replace it with the FUSE
specified in the chassis part list.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence of
uninsulated dangerous voltage within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the set.
All manuals and user guides at all-guides.com

- 4 -
Many electrical and mechanical parts in the chassis have special
safety-related characteristics. These characteristics are often passed unnoticed
by a visual inspection. When replacement parts are required, be sure the
service technician uses replacement parts specified by us that have the same
characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock and injury to persons or other hazards. This LCD TV product
should be situated away from heat source such as radiation, stoves, or other
product that produce heat.
All manuals and user guides at all-guides.com

- 5 -
2 Product Function Specifications
All manuals and user guides at all-guides.com

- 6 -
3. LCD Panel Spec
3-1 General Description
LCD3733EU、LCD4033NEU、LCD4233EU’S LCD Panel is a TFT LCD module
with 18-EEFL Backlight unit and 1ch-LVDS interface. This module supports
1366 x 768 WXGA format and can display true 16.7M colors (8-bit colors).
The inverter module for backlight is built-in.
3-2 General Features
LCD3733EU:
LCD4033NEU:
All manuals and user guides at all-guides.com

- 7 -
LCD4233EU:
All manuals and user guides at all-guides.com

- 8 -
4. Block Diagram
4-1 Main board
All manuals and user guides at all-guides.com

- 9 -
4-2 Power board of LCD3733EU
4-3 Power board of LCD4033NEU/LCD4233EU
POWER BOARD
All manuals and user guides at all-guides.com

- 10 -
5. Service Mode And Adjustment
Use the remote control, first open MAIN MENU with MENU button, and
choose SOUND with the CHANNEL UP/DOWN button, then choose the
BALANCE with VOLUME UP, while Balance value is 0, press 0、5、3、2,you
can enter factory menu.
Fac. Menu
LOGO
NULL
WELCOME
Auto Calibration
Auto Color
ColorTemp. Standard
RED COLOR 137
GREEN COLOR 140
BLUE COLOR 138
White Balance
RDRV 10
GDRV 10
BDRV 10
RCUT 137
GCUT 140
BCUT 138
BRIGHT_H 80
CONTRAST _H 80
BRIGHT_L 40
CONTRAST_L 40
Factory Menu
White Balance
Auto Test
Auto Calibration
LOGO
OSD Language
Country
Option
Factory Init
Test Pattern
Version:
All manuals and user guides at all-guides.com