Hisense RB325D4AW1 Mounting instructions

RB325D4AW1
RB325D4AB1

2
Safety and warning info rmation.........2 Using your appliance.......................12
Installing your new appliance ..............7 ....................12 Helpful hints and tips
Reversing the door ...........................8 Cleaning and Care.........................13
Description of the appliance..............10 Troubleshooting ............................15
Operation......................... .................11
This appliance is produced in accordance with the following EU guidelines:
2006/95/EC, 2004/108/EC, 2009/125/EC, EC.643/2009 and 2002/96/EC
For your safety and correct
usage, before installing and
first using the appliance,
read this user m anual
carefully, including its hints
and warnings.
To avoid unnecessary
mistakes and accidents, it is
important to make sure that
all people using the appliance
are thoroughly familiar with its
operation and safety features.
Save these instructions and
be sure that they remain
with the appliance if it is
moved or sold, so that
anyone using it throughout
its life will be properly
informed on usage and
safety notices.
For the safety of life and
property, keep the precautions
of these user's instructions as
the manufacturer is not
responsible for damages
caused by omission.
Safety for children and others
who are vulnerable
This appliance can be used
by children aged from 8
years and above, and
per s o n s with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge if
they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user
maintenance should not be
carried out by children
without supervision.
Keep all packaging away
from children as there is risk
of suffocation.
Safety and warning informationContents
Contents
Disposal of the appliance..............17
Hisense Refrigerator

3
If you are discarding the
appliance, pull the plug out
of the socket, cut the
connection cable (as close
to the appliance as you can)
and remove the door to
prevent children from
suffering an electric
shock
or from closing
themselves inside.
If this appliance, featuring a
magnetic door seals, is to
replace an older appliance
having a spring lock (latch)
on the door or lid, please
make the sp ring lock
unusable before you
discard the old appliance.
This will reduce the risk
of trapping children or
animals inside.
General safety
WARNING his — T
appliance is designed
to be used in domestic
households and not intended
for use in retail or
commercial environments.
WARNING — Do not store
explosive substances such
as aerosol cans with a
flammable propellant in this
appliance.
WARNING If the supply —
cord is damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
WARNING Keep —
ventilation openings in the
appliance enclosure or in
any built-in structure clear
of obstruction.
WARNING Do not use —
mechanical devices or
other means to accelerate
the defrosting process,
other than those
recommended by the
manufacturer.
WARNING Do not —
damage the refrigerant
circuit.
WARNING Do not use —
electrical appliances inside
the food storage
c o m p a r t m e n t s o f t h e
appliance, unless they are
of the type recommended
by the manufacturer.
WARNING The —
refrigerant and insulation
are flammable.
Hisense Refrigerator

4
When disposing of the
appliance, do so only at
an a u t h o r i z e d w a s t e
disposal center. Do not
expose to flame.
Electrical safety
1.The power cord must not
be lengthened.
2.Make sure that the
power plug is not crushed
Refrigerant
or damaged. A crushed or
The refrigerant isobutene
(R600a) is contained within
the refrigerant circuit of the
appliance. This is a natural
gas with a high level of
environmental compatibility,
wh ic h is nevertheless
flammable . During
transportation and
installation of the appliance,
ensure that none of the
components of the
refrigerant circuit becomes
damaged.
The refrigerant (R600a) is
flammable.
Caution:risk of fire
If the refrigerant circuit
is damaged:
-Avoid naked flames and
sources of ignition.
-Thoroughly ventilate the
room in which the appliance
is situated.
It is dangerous to alter the
specifications or modify this
product in any way.
Any damage to the cord
may cause a shortcircuit,
fire, and/or electric shock.
damaged power plug may
overheat and cause a fire.
3.Make sure that you can
access the main plug of the
appliance.
4.Do not pull the main
cable.
5.If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6.You must not operate the
a pp l i an c e w i t h o ut the
interior lighting lamp cover.
7.The fridge should only be
supplied with single phase
alternating current of 220 ~
240V / 50Hz . If the supply
fluctuates outside this range
an automatic A.C. voltage
regulator
of more than 350W
should be used. The fridge
should be plugged into an
adequately earthed supply
Hisense Refrigerator

5
Daily use
Do not store flammable
gas
or liquids in the
appliance, there is a risk of
explosion.
Do not operate any
electrical appliances in
the appliance (e.g.
electric ice cream
makers, mixers etc.).
When unplugging always
pull the plug from the
mains socket. Do not pull
on the cable.
Do not place hot items near
the plastic components of
this appliance.
Do not place food products
directly against the air
outlet on the rear wall.
Store pre-packed frozen
food in accordance with the
frozen food manufacture’s
instructions.
The manufactures storage
recommendations should be
strictly adhered to. Refer to
relevant instructions for
storage.
Do not place carbonated
or fizzy drinks
in the
freezer compartment as it
creates pressure on the
container, which may
Cause it to explode,
resulting in damage to the
appliance.
Frozen food can cause frost
burns if consumed straight
from the freezer compartment.
Do not place the appliance
in direct sunlight.
Keep burning candles,
lamps and other items
with naked flames away
from the appliance
The appliance is only
intended for keeping food a n
d/or beverages for normal
household consumption a s
explained in this instruction
booklet
The appliance is heavy.
Care should
be taken
when moving it.
Do not remove nor touch
items from the freezer
compartment if your hands
are damp/wet, as this could
cause skin abrasions or
frost/freezer burns.
Never use the base,
drawers,
doors etc. to
stand on or as supports.
Frozen food must not be
refrozen once it has been
thawed out.
Hisense Refrigerator

6
To avoid items falling and
causing injury or damage
to the appliance, do not
overload the door racks
or put too much food in
the crisper drawers.
Caution!
Care and cleaning
Before p e rf o rm i n g
maintenance, switch off
the appliance and
disconnect the mains plug
from the mains socket.
Do not clean the appliance
with metal objects, steam
cleaners, ethereal oils,
organic solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
Installation Important!
For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check for damage. Do not
connect the appliance if it
is damaged. Report
possible damage
immediately to your
retailer. In this case,
please retain packing.
It is advisable to wait at
least four
hours before
connecting the appliance to
avoid damaging the
compressor.
Adequate air circulation
should be provided
around the appliance. To
achieve sufficient
ventilation. Please follow
the instructions relevant
to installation.
Wherever possible the back
of the product should not be
too close to flammable
materials as some
components are hot in
normal operation.
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible following
installation of the appliance.
Service
This product must be
serviced by an authorized
Service Center or Service
Agent, and only genuine
spare parts must be used
Hisense Refrigerator

1749
636
1139
938
7
It is advisable for there to be

8
Reversing the door
1. Stand the refrigerator, open the upper
door and remove the door shelves and close
it(preventing ). damage to the shelves
2. Use a putty knife or thin-blade
screwdriver to prize the screw hole cover
which is at the top left corner of the
refrigerator, and Unscrew the upper hinge
cover which is at the top right corner of the
refrigerator.
screw hole cover screw
upper hinge
cover (right)
The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
Tools you will need:
1. 8mm socket driver
2. cross-shaped screwdriver
Before you start
in order to gain access to the
base, you should rest it on soft foam
packaging or similar material to avoid
damaging the cooling pipes at the rear of the
refrigerator.
carefully tilt the refrigerator
backwards
3. Putty knife or thin-blade screwdriver
3.Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver or
a spanner(please support the upper door
with your hand when doing it ).
right upper hinge part
special flange
selftapping screws
4.Remove the upper hinge , transfer it to
reversed side and tighten securely, then put
it in a safe place.
pin
NOTE: When removing the door, watch for
washer(s) between the ceter hinge and the
bottom of the freezer door that may stick to
the door. Do not lose .
6.Unscrew the two special flange self-
tapping screws which are used for fixing the
middle hinge part, then remove the middle
hinge part that the lower door in place.
these
holds
5.Lift the upper door and set it on a non
scratching surface with the outside up
middle hinge part
special flange
selftapping screws

8. Remove the screw hole cover from the left
holes as illustrated and transfer them to the
holes at the right side.uncovered
screw hole cover
screw hole covers
screw hole cover
screw hole covers
7. Lift the lower door and set it on a non
scratching surface with the outside up
NOTE: When removing the door, watch for
washer(s) between the hinge and the
bottom of the freezer door that may stick to.
the door. Do not lose .
center
these
12. Transfer the lower door to the
position, adjust the lower hinge part, the
hinge into the lower hole of the lower
door, then tight the bolts.
new
fit
pin
9. Lay the refrigerator on soft foam
packaging or similar material. Remove both
adjustable bottom feet parts, and remove
the front feet fixed board and the lower
hinge part by unscrewing the special flange
self-tapping screws.
front feet fixed board
ajustable bottom
feet part
special flange
selftapping screws
lower hinge part
ajustable bottom
feet part
special flange
selftapping screws
10. Unscrew the bottom hinge and
it to the .
pin move
adjoining hole
11. Replace the lower hinge part to the left
side and it with the special flange self-
tapping screws. Replace the front feet fixed
board to side and it with the
special flange self-tapping screws. Install
the ajustable bottom feet parts,
fix
the other fix
lower hinge part
front feet fixed board
13. the middle hinge part 180
, transfer it and adjust its position
, the middle hinge into the upper hole
of the lower door, tight the bolts.
Turn by
degrees
Fit pin
14.Transfer the upper door to the
appropriate position. Secure the door's level;
the middle hinge into the lower hole of
the upper door.
fit pin
9

15. the upper hinge into the upper
hole of the upper door,and adjust the
position of the upper door(please support
the upper door with your hand when doing
it),fixing the upper hinge part with the special
flange self-tapping screws.
Fit pin
16. Install the screw hole cover on the top
right corner of the refrigerator. Install the
upper hinge cover (which is in the plastic
bag) on the left corner .Put the other upper
hinge cover into the plastic bag.
17. Open the upper door and install the door
shelves, then close it.
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
upper hinge part
screw
upper hinge cover (left) screw hole
cover
Description of the appliance
View of the appliance
1.Temperature regulator
2.Storage shelf.
3.Crisper Cover
4.Crisper
5.Upper Drawer in freezer
6.Middle Drawer in freezer
7.Lower Drawer in freezer
8.Upper Door rack
9.Lower Door rack
10.Ajustable bottom feet part
11.handles(only for the model with handles) 10
10
18.
usage
d