Hisense 50A7G User manual

Bar code

English
ES-A210802-1
QUICK SETUP GUIDE
Before using the TV, please read this guide thoroughly
and retain it for future reference. For more detailed
instructions, please see the User Manual or the E-Manual.
50A7G
55A7G
65A7G
75A7G

A
Important Safety Precautions
This symbol alerts user about the
presence of a dangerous voltage not
isolated inside the product which can
be sufficiently powerful to constitute a
risk of electrocution.
This symbol alerts user about the
presence of important operating
instructions and maintenance in the
document enclosed in the package.
Disposal of Used Electrical & Electronic Equipment
ATTENTION
RISK OF SHOCK
ELECTRIC
Packaging and electrical goods should be recycled appropriately, and
not treated as household waste. Please dispose of this equipment at
your applicable collection point for the recycling of electrical & electronic
equipment waste. By ensuring the correct disposal of this product,
you will help prevent potentially hazardous to the environment and to
human health, which could otherwise be caused by unsuitable waste
handling of this product. The recycling of materials will help conserve
natural resources. Please do not therefore dispose of your old electrical
and electronic equipment with your household waste. For more detailed
information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
Do not open the back cover.
In no case the user is allowed to operate
inside the TV set. Only a qualified
technician is entitled to operate.
Class II product: This symbol indicates that it does not require a safety
connection of protective earthing (ground).
AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.

1
Contents
Contents
Figures and illustrations in this manual are provided for reference only and may di󰀨er
from actual product appearance.
Parts of the software function changes with the system upgrade.
Accessories List..............................................................................................................1
Installing the Stand.........................................................................................................2
Installing the Wall Mount Bracket ...................................................................................4
TV Front..........................................................................................................................5
TV Rear ..........................................................................................................................6
Making Connections.......................................................................................................7
Remote Control ............................................................................................................ 11
Turning the TV on for the First Time.............................................................................14
Specifications ...............................................................................................................15
Other Information..........................................................................................................17
Accessories List
The following accessories are included with TV:
Quick Setup Guide × 1 Remote Control × 1 AAA Battery × 2
Power Cord × 1 Base Stand × 2 Screw × 4
RCA Jack to AV Cable× 1
The accessories may be di󰀨erent from the list above due to di󰀨erent models, countries/regions,
please refer to the actual accessory bag.

2
Follow the illustrations and textual instructions below to complete the installation steps:
Installing the Stand
Installing the Stand or Wall Mount Bracket
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
For 50"/55"
Base Stand
Base Stand
Screws：
M4×12
Screws：
M4×12

3
Installing the Stand or Wall Mount Bracket
For 65"/75"
Attention: According to the size of the TV supporting surface, you can select one of
the base stand installation patterns, as shown in the figure.
Base Stand
Base Stand
Base Stand
Base Stand
Screws：
M5×16(65")
M5×12(75")
Screws：
M5×16(65")
M5×12(75")
Screws：
M5×16(65")
M5×12(75")
Screws：
M5×16(65")
M5×12(75")

4
Installing the Stand or Wall Mount Bracket
Installing the Wall Mount Bracket
Wall mount hole pattern (mm)
300 × 200 (50"/55")
400 × 200 (65")
400 × 300 (75")
Wall mount screw size M6
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover of the TV
8.0-10.0 mm
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.
Before mounting the TV, remove the TV stand if you have already attached it, and make
sure the wall mount bracket supports the weight of your TV.
Place spacers between the TV and bracket.
Make sure the tilt angle between the TV screen and the
vertical surface is no more than 15 degrees.
Standard dimensions are shown below.
≤15°
TV screen
Vertical
surface
NOTES
The diameter and length of the screws differ depending on the wall mount bracket
model.
Wall mount bracket is optional, your device may not have wall mount bracket, please
refer to the actual accessories.

5
TV Front
TV Front
NOTES
The Picture is Only for Reference.
Powering on the TV requires several seconds to load programs. Do not rapidly
turn the TV off as it may cause the TV work abnormally.
Item Description
Remote sensor
Receive remote signals from the remote control.
Do not put anything near the sensor, as its function may be
affected.
Power indicator The light is red in standby mode.
Standby / Source
Press the button to turn the TV on. Press it again to bring up the
control menu and move the focus between different inputs. Long
press the button to make a selection.
Remote sensor/Power indicator/Single button (Standby/Source)

6
TV Rear
NOTES
Check the jacks for position and type before making any connections.
Loose connections can result in image or color problems. Make sure
that all connections are tight and secure.
The TV may not be compatible with all external devices. To check
compatibility, please refer to the user manual of external device.
Do not connect external equipment while TV's power cord is plugged
in. It may cause electric shock.
Service jack is not available for you to connect an external device. It
can only be used by our factory for testing purposes.
TV Rear
USB 2
DC 5V 0.5A(MAX)
HDMI 3
(4K@60Hz) SERVICE
ANT HDMI 2(4K@60Hz)
(eARC/ARC) AV IN USB 1
DC 5V 1A(MAX)
HDMI 1
(4K@60Hz)
AC INPUT LAN DIGITAL
AUDIO OUT

7
Making Connections
ANT Connect an outdoor VHF/UHF antenna or cable.
TV JACK
Outdoor
Antenna
Antenna Cable (75Ω)
or ANT OUT
Cable
VHF/UHF Antenna
ANT
(not included)
HDMI / AV
Connect a HDMI / AV cable from an external AV equipment. No sound connection
is needed for HDMI to HDMI connection. If the signal resolution does not match the
specification table, you need to change the setting of device according to the table.
Please consult your device user manual for instruction.
·To select the HDMI / AV
Press the [INPUT] button, when the list of input Source appears, press the [
/ / < / >
]
buttons to select the source HDMI / AV, then press the [OK] button to connect.
BETTER (HDMI)
Video Eect:
Video Camera/
Set-top Box/
Satellite Receiver
TV JACK
GOOD (AV)
Video Eect:
TV JACK
HDMI cable (not included)
White(L)
Red(R)
Yellow(Video)
AV IN
(Cables are not included)