Hisense XQB30-M328H User manual

MODEL:XQB30-M328H

Part Name
Cover
Frame
Safety Cover
Pulsator
Cabinet
Back Cover
Power Cord
Drain Hose
Accessories
Drain hose
Waterproof board
Safety cover + Hinge Water supply hose

Installation Instructions
Water inlet connection
Connect the inlet hose supplied with the machine to a tap with a 3/4” thread.
Do not use previously employed hoses.
Installation should comply with local water authority and building regulations’ requirements.
The installation of water inlet pipe

Installation
Install the drain hose
Position the other end of the drain hose .It can be positioned in the three way .
A . Over the edge of a wash basin .Secure the guide to the side of basin wall with a hook
or to the tap with a piece of string to prevent the drain hose from moving .
B.In a standpipe
The standpipe mush no shorter than 32 in .(81cm) and no longer than 39 in. (100cm)
C.In a laundry tub
The laundry tun mush no shorter than 32 in. (81cm) and no longer than 39 in.(100cm)
up

Operation
Press the button to select
delay time : 2-3-4-5-6-8-10
-12-16-20-24-0 (no reserve)
Press this button to select
water level :1-2-3-4
Press and hold this
button 3 seconds
Child Lock , use this
option to disable the
controls. Press and hold
this button 3 second
again ,Child Lock to be
settle
LED LIGHT
Press this button select
program : Normal, Soak ,
Warm ,Hot , Boiling ,Speedy ,
Rinse , Spin , Air Dry
Water clarity test :When
choose this program ,
indicator light -on ,
when it start work ,
indicator
flash.
Start /Pause
Press this button
to turn on the power
of the machine . Press
this button and hold 0.5
second to turn Off the unit
Press the button to start.
Press button to pause. Again
4
PRO
GRAM
WATER
LEVEL
PRESET
TIME
CHILD
LOCK
NOR
MAL
SOAK
WARM
HOT
BOILING SPEEDY
RINSE
SPIN
TUB SELF
CLEAN

NOR
MAL
SOAK
WARM
HOT
BOILING SPEEDY
RINSE
SPIN
TUB SELF
CLEAN
Operation
1.Normal program---for washing normal clothes
2.Soak program---water temperature 30°C ,fit for washing dirty laundry more completely
3.Warm program--water temperature 40°C, fit for washing underwear
4.Hot program--water temperature 60°C, fit for washing cotton-padded clothes
5.Boiling program--water temerature 90°C, fit for washing the clothes need
high-temperature sterilization
6.Speedy program--fit for washing slight dirty laundry
7.Rinse program--In order to remove more stains from unwashed laundry detergent
and other stains effectively
8.Spin program---Only for spin
9.The barrel cleaning program removes dirt from the washing machine, keeping it clean
and the clothes will be cleaner when washing.
5
WIFI indicator

Safety and Precautions
Please read the following carefully . Prevent personal injury and prolong
the service life of the machine.
Because the water in the process of hot program and boiling program is hot ,
so there is a danger of scalding.In particular,
children should be prevented from approaching this washing machine .
After hot program and boiling program washing ,the water drain out from the machine
is hot , please be careful to guard against scalding. Plug the power cord into an AC
110V/60HZ wall socket rated 15amps or higher . Use the socket for this machine only .
Sharing a wall socket with other appliances ,using a power strip ,or extend the power
cord may result in electric shock or fire.
Ensure that the power voltage ,frequency and current match the product specifications .
Failing to do so may sesult electric shock or fire
Do not use this product and other heating equipment at
the same time
Inspection of clothes before hot program and boiling program
washing Separate the clothes according to the color
Do not wash clothes that may fade
The maximum wash capacity of
hot program and boiling
program washing is 1.5 kg
1. Clothes are classified according to the type, color
and degree of contamination (such as dirty clothes,
non fading clothes, white clothes, soft clothes, etc.).
2. Fasten all clothing with the attached objects and
emptying the pocket
3. If the clothing is damaged, please repair it and wash
it again
4. Check the button to tighten
5. It is better to pretreat the difficult stains before washing.
If the laundry is caught in the safety lid, the clothes will
be torn or may cause leakage and splash, so be sure to
close the safety lid after the safety lid is not clamped
The above capacity is for reference only .The wash capacity will vary slightly according
to the thickness of the clothes
Baby/Child Adult
Baby diapers
Baby Summer
clothes
Baby light
clothes
Child Summer
clothes
Baby sweater
Baby coat
6-8pcs
5-6pcs
3-4pcs
2-3pcs
1-2pcs
1pc
Underwear
Socks
T-shirt
Vest
Towel
Scarf
8-10pcs
10-12 pairs
2-3pcs
2-3pcs
3-4pcs
1pc
Textile categories that are
not suitable for boiling wash Clothes that is not suitable for boiling wash
Cotton fabric
Knitted fabric
Hemp fabric
wool or silk product
Chemical fiber fabric
Man-made fiber
A faded T-Sshirt
Printed T-shirt
Crease proof clothes
Clothes that only allow cold water to wash
Jacket ,Shirt ,stockings
Do not boiling wash clothes
6
Inspection of clothes before hot water
and boiling wash program

Safety and Precautions
7

Safety and Precautions
8

Troubleshooting
Function of fault alarm and flash
E 1
E 2
E 3
E 4
E 5
E 6
E 7
Exceptional
phenomenons Cause Sensor of water
lever series
No indication
in controller
The power plug is not plugged tight,
the Power switch is not switched No display
No display
Re-plug the power plug,
press”POWER”button
Power socket no electricity or
fuse disconnection Check the power socket or fuse
After the failure Of electricity
supply, it need to re-operation
After the electricity, Wash Rinse
Spin Normal four indicator lights up
Overhigh voltage or low voltage
Low voltage no display, overhigh
voltage may cause the fuse damaged
Pull the plug, use after the
voltage return to normal
Enter water
failure
Have not open the tap, stop water, low water pressure,
water have not reach the set water level after 20minutes
Open the tap, Clean the netting according to
the method of “Cleaning the water inlet”
Drain failure
The drain house is placed too high or have not lay down
the drian hose. The drain hose is wrung or jammed.
Check the drain hose, lay the drain hose lowly, press
“Start/Pause” button after checking. Open the machine
cover and close the machine cover for alarm free
Open abnormal
Safety lid is open Closed the lid
Touch the
shell during
the spinning
Cloth are uneven in tub causes its unbalance and rub
the shell. Washing machine will adjust itself. After twice
adjustment,if it still in unbalance,it will Be warning.
Open the lid, put clothes well, close the lid
Overhigh
water level Water level up on the highest safety water level PCB can Auto-precess
Sensor of water
lever abnormal
Stage frequency less than high water level limit
or exceed than low water level limit, will shows
sensor of water lever error alarm
Please ask professional person to check
Pause
abnormal Pause time exceed 10 minutes Please press the “start” button
Solution
After the electricity,
please re-operation
Note :After checking the above points, there is still an exception.
Please pull off the power plug and contact the distributor as soon
as possible.
Sensor of
waterTemerature
abnormal
Sensor of water temperature open/short circuit
E 8
Restore normal or automatically
switch to cold water
Super high
water temperature
Water temperature is more than 93 degrees Wait for water temperature to cool or switched
to hot program washing or shutdown
E 0
Heating abnormal Continuous heating for 30 minutes, the temperature rise is
less than 2 degrees Switched to hot program washing or shutdown
E C
Lid lock abnormal Continuous action ,can not be locked or cannot be opened Restart
F 1
Communication
abnormal The display board and the drive board are not connected well Call to service center for help
C E
9

390*420*720mm
18
Specification
Model No
Voltage /Frequency
Rated wash and spin capacity
Water Level
Water inlet pressure
Rated input power
Net Weight
Product size
Noise Noise
XQB30-M328H
Unbalance adjustment function
If the clothes are placed unevenly in the inner tub during spinning ,
it will cause vibration. This machine has the function of unbalance
adjustment. Automatic power off function
10 minutes after starting, do not start the program, automatically
cut off the power supply. After the completion of the laundry program,
the power supply is automatically cut off
10
heating power