Hitachi CG2143S User manual

GB
Instructions for use
CG2143S

GB -1-
Contents
Other Features...............................................................13
TV Status......................................................................13
Programme Swap (P<P).............................................13
Double-digit (- -)..........................................................13
Personal Preferences (PP).........................................13
Sound Indicator...........................................................13
Sleep Timer Last Minute Indicator..............................13
Mute Indicator..............................................................13
No-Signal....................................................................13
Blue Background During No-Signal............................13
Volume Bar..................................................................13
AVModes.....................................................................14
Teletext...........................................................................14
Tooperate Teletext......................................................14
Toselect apage of Teletext.........................................14
ToSelect IndexPage...................................................14
ToSelect Teletextwith a TV Programme.....................14
Searching for apage while watching TV.....................14
ToSelect Double Height Text......................................14
ToReveal “concealed” Information.............................14
ToStop Automatic Page Change.................................14
ToSelect aSubcode Page..........................................14
Fastext.........................................................................14
Toexit Teletext..............................................................15
ToDisplay the Time.....................................................15
Tips.................................................................................15
Care of the Screen......................................................15
Poor Picture.................................................................15
No Picture....................................................................15
Sound..........................................................................15
Remote Control...........................................................15
Nosolution..................................................................15
Specifications................................................................16
RemoteControlButtons..................................................2
Control PanelButtons.....................................................3
ConnectPeripheralEquipment.......................................3
ConnectPeripheralEquipment.......................................4
Via the Euroconnector...................................................4
Via Aerial Input...............................................................4
Decoder.........................................................................4
TV and Video Recorder.................................................4
Search for and store the test signal of the video
recorder.........................................................................4
CameraandCamcorder...............................................4
Connect the decoder to the video recorder...................4
Preparation......................................................................5
Features........................................................................5
SafetyPrecautions..........................................................5
Before Switching on yourTV..........................................7
Power connection..........................................................7
Connections to the RF input socket..............................7
Howto connect other devices.......................................7
Inserting batteries in the remote control handset.........7
Switching the TVON/OFF.................................................7
To switch the TV on.......................................................7
Toswitch the TV off........................................................7
Operating the TV..............................................................7
A.P.S. (Automatic Programming System)......................7
Operating with the buttons on the TV set......................8
Operating with Remote Control....................................8
Menu System...................................................................8
Sound Menu..................................................................8
Picture Menu................................................................10
Feature Menu..............................................................10
Install Menu.................................................................11
ProgrammeMenu.......................................................12
Autostore.....................................................................12
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:261

GB -2-
RemoteControl Buttons
=Stand By
I-II =Mono/Stereo -Dual I-II
0 -9 =Direct Program
=PreviousProgramme
-- = Double Digit
=Info (Program Menu)
= Programme Up (Cursor Up)
= Cursor Right
-VOL/VOL + =Volume -/Volume +
Yellow(FEATURE)=Feature Menu
Blue (INSTALL) =Installation Menu
=External Source (AV-1,F-AV,RGB)
Teletext Buttons
=Teletext
=Update
=Hold
=Index Page
=Reveal
=Expand
=Time
=Mix
=TV /QuitMenu
Red (SOUND) = Sound Menu
Green (PICTURE) =PictureMenu
= Programme Down (Cursor Down)
=CursorLeft
=Menu
=Change Picture Preset
=Mute
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:262

GB -3-
ControlPanel Buttons
ANT.IN
POWER /=PowerOn/Off
/ =Volume -/ Volume +
- P / P + =Program - / Program +
Front AVinput
AUDIO L/R =Audio left(white)/right(red)
VIDEO =VCR (yellow)
FrontAV
ConnectPeripheralEquipment
Thereis a wide range of audio and video equipmentthat can be connected to yourTV.
The connection diagrams show the back ofthe TV where the differentequipmentshould be connected.
DECODER
FORSATELLITERECEIVER
VIDEO
AUDIO
CAMERA
SCART 1
Aerial
External 1
REARPANEL
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:263

GB -4-
ConnectPeripheralEquipment
There is awide range of audio and video equipment that can
be connected toyourTV.
The following connection diagrams showyou where the dif-
ferent equipment should be connected at the rear side ofthe
TV.
Via the Euroconnector
Your TV set has aEuroconnectorsocket. If youwant toconnect
peripherals(e.g.video,decoder,etc.)which haveEuroconnec-
tors,toyourTV,use SCART1 input.
If an external device is connected via Euroconnector sockets
TV is switched toAV mode automatically. If the signal is RGB
then the RGB OSDindicatoris displayed on the screen.
InAVmode ifyou press the “ ”button the TVstatus OSD is
displayed on the screen.
ViaAerial Input
If the equipmentyou wanttoconnecttoyourTV e.g.video re-
corder orsatellite receiver doesnothave aSCART socket,you
should connectit tothe aerial (ANT) socket on yourTV.
Decoder
Cable TV offersyou awide choice ofprograms.Mostofthem
are free,othersaretobepaidfor bytheviewer.Thismeansthat
youwill need tosubscribe to the broadcasting organization
whose programmes you wish toreceive.This organization will
supplyyou with a corresponding decoder unit to allowthe
programmestobeunscrambled.
Forfurther information ask your dealer.See also the booklet
supplied with yourdecoder.
Connecting adecoder with an aerial socket to the TV
•Connectthe aerial cable.
Connecting adecoder without an aerial socket to the
TV
•Connectthedecoder to your TV witha SCARTlead to
SCART1.When yourdecoderhas aSCART connectoryou
can obtain betterpicturequality ifyou connectaSCART lead
to EXTERNAL.
• Then select the appropriate AV mode by pressing the “AV ”
button.
TVand Video Recorder
•If yourvideo recorderhas aSCART socket please connectit
tothe TV using aSCARTlead. YourTV should also be con-
nected to your video recorder using the aerial RF output
socket.
Please note using a SCARTlead will produce betterqualitiy
pictures.
Search for and store the test signal of the
videorecorder
•Unplug the aerial cable from the aerial socket“ANT”ofyour
video recorder.
•Switch on your TV and putthe video recorderon the testsig-
nal. (See the handbook foryour video recorder.)
•Enter the Tuning menu via the Install menu.
• Search forthe testsignal ofyourvideo recorderin the same
wayas you searched for andstored the TV signals. See
Tuning,Search and StoreTV channels.Storethe testsignal
underprogramme number 0.
• Replace the aerial cable in the aerial socket“ANT” ofyour
video recorder once you have stored the test signal.
Camera andCamcorder
Toconnectto Front-AVinput
Connectyourcamcorderto the frontofyourTV.
•ConnectyourequipmenttotheTV viaVIDEO (yellow),AUDIO
R (red)and AUDIO L (white) inputs.You should connectthe
jacks to the inputof the same colour.
Connect the decodertothevideo recorder
Somevideorecordershave aspecialSCART connector for de-
coder.
•ConnectaSCART lead tothe SCART connectorofyourde-
coderand tothe special SCART connectorofyourvideo re-
corder.See also the handbook ofyour video recorder.
•Toconnectyour video recordertothe TV, see TV and Video
Recorder section.
Ifyouwanttoconnect moreequipmenttoyour TV,consult your
dealer.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:264

GB -5-
Preparation
Place the TV on a solid surface.
IfplacingtheTV into acabinetoralcove,ensurethere isatleast
a100mm (10cm) gap tothe sides and rearand top ofthe TV.
Thisis to allowforadequate ventilationduringoperation.
Please read belowformore safety information beforeinstal-
lation.
“Use thisapparatus intropicaland/ormoderateclimates”
Features
•Itis a remotecontrolled colour television.
•100 programmes from VHF,UHF bands orcable channels
can be preset.
•Itcan tune cable channels.
• Controlling the TV is very easyby its menu driven system.
•It has SCART connector forexternal devices (video recorder,
audio equipment,video games,etc.).
• German Stereo sound systems.
•FrontAVin is available.
•Teletext(Fastext).
•Directchannel access.
•A.P.S. (Automatic Programming System).
•All programmes can be named.
• Programme swapping between last watchedtwo pro-
grammes.
•Forward or backward automatic tuning.
•Sleep timer.
•Child Lock.
•Automaticsound mute when no transmission.
•When no valid signal is detected, after 5 minutes the TV
switches itself automaticallyto stand-by mode.
• WSS (Wide Screen Signaling).
SafetyPrecautions
IMPORTANT SAFETY INFORMATION ON
OPERATING YOUR TV
Do’s and Don’ts
DO’s
This Television has been designed and manufactured tomeet
international safety standards,but like any electrical equip-
ment, caremust be taken if you aretoobtain the bestresults
and safety is to be assured.
DO read the operating instructions beforeyou attempttouse
the equipment.
DO consult your dealer if you arein any doubt about installa-
tion, operation orsafetyof your equipment.
DO be careful with glass panels or doors on equipment.
This TV is supplied with a fitted mains plug. This plug must
notbe cutoff as itmay contain aspecial radio interference fil-
ter,the removal ofwhich could lead toimpaired performance.
If you wish toextend the lead,obtain an appropriatesafety ap-
proved extension lead or consult yourdealer.
Observethe manufacturersinstructions when connecting ex-
tension leads tothe TV.Check the fuse rating onthe newplug,
this should be fitted with a 5 Amp fuse which conforms to ei-
therASTAor BSI (BS1362) approvals, these areeasily iden-
tifiable by either the or symbols. If you are in anydoubt
aboutthe installation ofan extension lead, please consult a
competent electrician.
DON’Ts
DON’T continue to operatethe equipment if you arein any
doubtaboutitworking normally,orifitis damaged in anyway
switch off, withdrawthe mains plug and consultyour dealer.
DON’T place water filled vessels on top ofT.V. cabinets.
DON’T removeanyfixed coveras this mayexpose dangerous
voltages.
DON’T leaveequipmentswitchedon when itisunattended un-
less it is specifically stated thatit is designed for unattended
operation orhas astand-bymode.Switch off using the switch
on the equipment and make sure your family knowhow todo
this.Special arrangementsmay need tobe made forinfirmor
handicapped people.
DON’T use equipment such as personal stereos or radios so
that you aredistracted from the requirementsof traffic safety.
Itis illegal to watch television whilst driving.
DON’T obstructthe ventilation of the equipment, for example
withcurtains or soft furnishings.Overheating will cause dam-
age and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fixlegs orstands to
the TV withany screwsother than those provided - toensure
completesafety alwaysusethemanufacturersapprovedstand
withthe fixings provided.
DON’T allow electrical equipment tobe exposed to rain or
moisture.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:265

GB -6-
ABOVEALL
•NEVERletanyone,especiallychildrenpush anythinginto
holes,slotsorany otheropening inthe case -thiscould
result inafatal electricshock.
• NEVER guess ortake chances withelectricalequipment
ofany kind -it isbettertobe safethan sorry!
1. Power Cord
The powersupply cable should be placed so thatitis notlikely
tobewalkedonor pinchedbyitemsplacedonor against it.Pay
particularattention to the cable
Whereit entersthe plug,power outlet, and the pointwhereit
emerges from the receiver.
2. Moisture and Water
Donotuse this equipmentin a humid and damp place (avoid
the bathroom, the sink in the kitchen, and near the washing
machine). Do not expose this equipment to rain or water,as
this maybe dangerous and do notplace objectsfilled withliq-
uids on top. Avoid from dripping or splashing.
3. Cleaning
Beforecleaning,unplug the receiverfrom the main supplyout-
let. Donotuse liquid oraerosol cleaners.Clean withasoft dry
cloth.
4. Lightning
Topreventdamage during astorm,lightning orwhen going on
holiday,disconnectthe power leadand aerialfrom thewall
outletand disconnectthe aerial plug from the back ofthe tele-
vision.
5. Ventilation
The slotsand openings on the receiver are intended for ven-
tilation and to ensurereliable operation.Toprevent overheat-
ing,theseopeningsmustnotbeblockedorcoveredin anyway.
6. Replacement Part
When replacement partsare required, be surethe service
technician has used replacementpartswhich arespecified by
the manufacturer orhavethe same specifications as the origi-
nal one. Unauthorized substitutions mayresult in fire,electri-
cal shock,or otherhazards.
7. Servicing
Pleasereferall servicingtoqualifiedpersonnel.Donotremove
the back coveras this may result in an electric shock.
8. X-rays
This television has sheilding forprotection against the emis-
sion ofX-rays.
9. Flamesources
Do not place naked flame sources on the apparatus.
Warning!
Anyinterventioncontrarytoregulations,inparticular,anymodi-
fication of high voltage or a replacement of thepicturetube
may lead to an increased concentration ofx-rays. Any televi-
sion modified in this way no longer complies withlicense and
mustnot be operated.
Instructionsfor wastedisposal:
•Packaging andpackagingaids arerecyclable and should
principallyberecycled.Packagingmaterials,suchasfoilbag,
must be keptaway from children.
•Batteries,includingthosewhich areheavy metal-free,should
notbe disposed ofwithhousehold waste.Please dispose of
usedbatteriesin an environmentallysoundmanner.Findout
aboutthe legal regulations which apply in your area”
“DONOTLEAVEYOUR TV INSTAND-BYOR OPERATING
WHENLEFTUNATTENDEDFORALONGTIME”
CAUTION
RISKOFELECTRIC SHOCK
The lightning flash withthe arrowhead symbol, within an equilateral triangle, is intended toalert the user
to the presence of uninsulated ''dangerous voltage''
within the product' enclosurethat may be of sufficientmagnitude toconstitutearisk ofan electric shock.
The exclamation pointwithin an equilateral triangle is intended toalert the usertothe presence ofimpor-
tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:266

GB -7-
BeforeSwitchingonyour TV
Power connection
IMPORTANT: The TV setis designed tooperateon220-240V
AC,50Hz.
•Afterunpacking,allow the TVsettoreach the ambientroom
temperature before you connect the setto the mains.
Connections to the RF input socket
• Connectthe aerial orcable TV plug intothe RFinputsocket
on the back of the TV.Ifyou arealso connecting avideo re-
corder /satellite receiver, plug the aerial into this equipment
firstand then connectthe RFoutputsocket from this device
tothe RFinputon the back ofthe TV.
VHF/UHF
75
Ω
TV REAR PANEL
CABLE TV
Howto connectother devices
IMPORTANT: SwitchofftheTV beforeconnectingany external
device.
Socketsforexternal connections areatthe back ofthe TV.For
connection of other devices via Euroconnector refer to the
manuals ofthe related devices.
Inserting batteries in the remote control
handset
•Place the batteries in the right directions as seen below.
•Removethe battery coverlocated on the back ofthe handset
by gently pulling upwards from the indicated part.
• Insert two AAA (R03) or equivalent type batteries inside.
•Replace the battery cover.
NOTE: Remove batteries from remote control handset when
itis nottobe used foralong period.Otherwise itcan be dam-
aged due to any leakage of batteries.
Switching theTV ON/OFF
To switchthe TV on
Your TV will switch on in twosteps:
1- Press the powerbutton located on the frontofthe TV.Then
the TV switches itselftostandby mode and the REDLED
located belowthe TV turns on.
2- To switch on the TVfrom stand-bymode either:
Pressadigit buttonon theremotecontrolso thataprogramme
number is selected,
or,
Press Programme Upor Downbuttons on the front of the TV
or on the remotecontrol, so thatlast switched off programme
is selected.
Ineithercase the TV will switch on and theRED LED will turn
toGREEN.
To switch theTV off
•Pressthestand-bybuttononthe remotecontrol, sotheTVwill
switch to stand-bymode and the GREEN LED will become
RED,
or,
Pressthepowerbuttonlocatedon thefrontoftheTV,sothe TV
will switch off and theGREEN LED will turnoff.
Operatingthe TV
You can operate your TV both using the remote control
handsetand onsetbuttons.
A.P.S. (Automatic Programming System)
"PLEASE, CHECKANTENNACABLE.AUTO PROGRAMMING
SYSTEM"messagewillbedisplayedwhenyouturnonyourTV
forthe firsttime. A.P.S.,searches and sortsall channels and
stores them automatically on yourTV, according tothe trans-
mission of programmesystemsinyour area.
TocancelA.P.S. beforestarting,press “
TV
”button.Firstofall
choose the “COUNTRY”. This,will effect the sort process in
A.P.S.
The "STANDARD"setting is fixed to"BG".You cannotchange
this item's setting.
Toselect“START”use “ “or“ ”button and press “ ”or“ ”
button.Tocancel A.P.S.during running press “ ” or “ ” but-
ton.
PLEASECHECKANTENNACABLE
AUTO. PROGRAMMINGSYSTEM
COUNTRY
STANDARD
START
D
BG
A.P.S.ISRUNNING
P07 VHF1
CANCEL
After A.P.S. isfinalized, aprogramme list will apperon the
screen.In the programme list you will see the programme
numbers andnames assigned to theprogrammes.
If you do not accept the locations and / or the programme
names of programmes, you can change them in Programme
menu.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:267

GB -8-
Operating with the buttons on the TV set
Volume setting and programme selection can be made using
the buttons on the front panel.
Volume Setting
•Press “ ”button to decrease volume or“ ” button
to increase volume,so a volume level scale (slider) will be
displayed at the middle of the bottom on the screen.
•By pressingboththe“ ”and“ ”buttonsatthesame
time you can enter Main menu.
Programme Selecting
•Press “P+”button toselectthe nextprogramme or“P-”but-
ton to select the previous programme.
Operating with Remote Control
The remotecontrol handset of yourTV is designed tocontrol
all the functions of the model you selected. The functions will
be described in accordance with the menu system ofyourTV.
Functions ofthe menu system aredescribed in Menu System
section.
Volume Setting
Press “VOL+”button toincrease volume.Press “VOL-”button
todecrease volume. A volume level scale (slider) will be dis-
played atthe middle of the bottom on the screen.
Programme Selecting (Previous or next programme)
•Press “ ” button to select the previous programme.
•Press “ “button to select the next programme.
Programme Selecting (direct access):
Press digit buttonsonthe remote controlhandset toselect
programmes between 0 and 9. TVwill switch to the selected
programme.Toselectprogrammes between 10 -99,you must
use the double digit button "- -".
thisOSD is displayedat the left handupper on the
screen.
Afterthis,pressthedigitbuttonsconsecutively forthepro-
gramme you wanttoselect(eg. forprogramme 27,firstpress
2and then 7).Ifthe second digitis not entered within 3 sec-
onds, this function will disappear.
Press directly the programme number to reselect single digit
programmes.
Programme Swapping
•Press "P<P"(programme swap) button to select the last
selected programme. This buttonprovides swapping be-
tween last two selected programmes. For example, select
programme 8,then selectprogramme 2.Now,if you press
"P<P"button,programme 8will be selected.If you press the
same button again,programme 2will be selected and so on.
MenuSystem
YourTV has beendesigned withamenu system, toprovide an
easy manipulation of amulti-function system. The TV is con-
trolled by choosing the commands, which are displayed on
the screen.
Press the " "button.The Mainmenu will bedisplayed atthe
middleon the screen.
All the selected itemsin thismenu systemis indicated with
CYAN characters and with an arrow on the leftside of items.
Toselectasub-menu use “ “or“ ”button,and press “ ”or
“”button.Each option canalso beselectedwiththe coloured
button and " "button on the remotecontrol.
MAINMENU
The menusystem isdescribed below.
The shortway in ordertoenter the menus,press :
" " Button,MainMenu.
RedButton,Sound Menu.
GreenButton,PictureMenu.
YellowButton,Feature Menu.
Blue Button,InstallMenu.
""Button,Programme Menu.
Menu button has two functions;firstis opening or closing the
"MAIN MENU", and the second is closing the sub-menu and
then opening its parent menu.
Sound Menu
Tochange sound settings
• Enterthe Sound Menu directly,pressing the Red button or,
•Asyou enterthe main menu, sound will be the first selected
option. In the main menu, select SOUND using “ “ or “ ”
button,then enter the soundmenu pressing“ ” or “ ”
button.
Setting Volume:
Asyou enterthe sound menu,Volume will be the firstselected
option.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:268

GB -9-
•Press “ ”button to increase volume.
•Press “ ”button to decrease volume.
Or you can directly change the volume settings using “VOL+”
(toincrease) or “-VOL”(todecrease) button.
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
Setting Balance
It allows adjusting the distribution between the left and right
speakers.
•Using “ “or“ ”button select Balance.
•Press “ ”button to change balance to the right.
• Press “ ” button tochange balance to the left.
When balancecontrolisinmid position,the cursorisdisplayed
with the two reciprocal arrows.
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
Selecting Mode
• Using “ “ or“ ”button selectMode.
• Press “ ” or “ ” button tochange Mode.
Youcan choose MONO, STEREOor DUAL (I-II)mode,onlyif the
selected channel supports that mode.
You can also change sound mode directlypressing “I-II”but-
ton on your remote control.
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
In case ofbilingual broadcast(Dual Sound), you can select
originalor dubbedlanguage usingmodeoption.
SettingAVL
Automatic Volume Limiting (AVL)function normalises sound
toobtain fixed outputlevel between programs,having different
sound levels.Pressing “ ” or“ ” button will turnon and off
this feature.
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
Setting Effect
You can use this featuretoswitch the sound effecton and off.
Pressing“ ”or “ ”button willturnonandoff thisfeature. Ifthe
currentsoundsystemisMONO and thesoundeffectis setON,
then the sound will be heardas if it isSTEREO. If the current
sound system is STEREO, switching this effect on will give a
morespatialsound.
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
Equalizer
ToenterEqualizersub-menu,select Equalizerusing “ “or“ ”
button,then enterEqualizermenu pressing “ ”or“ ”button.
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
InMODE item therearefivepredefined and one userdefined
options.These areUSER, CLASSIC, JAZZ,ROCK, POP and
FLAT.The predefined options can notbe changedbythe user.
Ifyou change one ofthe frequency values of the predefined
options,the MODE is switched automaticallytoUSER option.
The USER option may be adjusted by the user.
The 5items belowthe MODE areavailable toadjustthe sound
settings in 5frequencyvalues:120 Hz, 500 Hz,1.5kHz, 5kHz
and 10 kHz.Tochange the values of 5 frequencyoptions,
selectone ofthe options by “ “ or“ ”button,and then press
“”toincrease the value,or“ ”todecrease the value.Inmid
position, cursor is displayed with the two reciprocal arrows.
Tostore theEqualizersettings,press “ ” or“ ” button on
“STORE”option.
During the store process all the items are stored, moreover,
the USER mode information would notbe lost. Inotherwords,
when the usermode is selected again,afterstoring the MODE
withone ofthe predefined options,the userdefinde frequency
values would be set.
ToStore the Settings
• Press “ ” or “ ” button on “STORE” option to storeSound
menusettings.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:269

GB -10-
VOLUME
BALANCE
EFFECT
STORE
MODE
AVL
EQUALIZER
MONO
ON
OFF
PictureMenu
•Toenter thePicturemenudirectly,press the “GREEN”button,
or
•Press " " button,now you arein Main menu. In the Main
menu,select“PICTURE”using “ “or“ ”button,then enter
the Picture menu pressing “ ” or “ ”button.
Setting Brightness
•Asyouenterthe picturemenu,Brightnesswill bethefirst
selectedoption.
• Press “ ” button to increase brightness.
• Press “ ” button to decrease brightness.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE 4:3
Setting Contrast
•Using “ “or“ ”button selectContrast.
•Press “ ” button to increase contrast level.
•Press “ ” button to decrease contrast level.
Setting Colour
•Using “ “or “ ”button selectColour..
•Press “ ” button to increase colour level.
•Press “ ” button to decrease colour level.
Setting Sharpness
•Using “ “or “ ”button select Sharpness.
• Press “ ” button to increase sharpness.
• Press “ ” button to decrease sharpness.
Mode
This item is used tochange the picturesize. By pressing “ ”
or“ ”buttonyoumay choose one of these options: “4:3”,
“16:9”and “AUTO”. It isalso possible tochange picturemodes
directly by pressing button “ ” on yourremotecontrol.
• 4:3 This option forces the pictureratio to 4:3 mode.
•16:9 This option forces the pictureratio to 16:9 mode.
• AUTO This allowstochange the picturemode automatically,
according to the transmission of the selected channel. For
example,yourTV is 4:3mode,but the transmission of that
channel isin16:9mode.If you selecttheAUTO mode,the TV
isswitchedto16:9modeautomatically.IftheTV isin4:3
mode andthe pictureratio ofthechannelisalso4:3,there will
be no affect selecting the picture mode to AUTOmode.
WSS featureis onlyused inTV and F-AV modes.Forthe Pic-
tureMode selection inAV-1 the pin 8(ofScart) value is used.
In RGB modes the PictureMode can be 4:3,16:9(Automode
is notavailable.).
When the menu appears on screen, picture mode will auto-
matically change to its defaulttube mode (4:3 or16:9) but it
will turned to its stored mode whenthe menu disappears.
ToStore the Settings
•Press “ ”or “ ”button on STORE option to store Picture
menu settings except PictureMode.
FeatureMenu
•Toenter the Featuremenu directly,press the “YELLOW”
button,or
•Press " " button,now you arein Main menu. In the Main
menu,select FEATURE using“ “or “ ”button.Thenenterthe
Feature menu pressing “ ”or “ ”button.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2610

GB -11-
Sleep Timer
Asyou enterthe Featuremenu,SLEEP TIMERwill be the first
selected option. Use “ ”or “ ”button to change the Sleep
Timer valuesbetweenOFF,0:15:00,0:30:00,0:45:00, 1:00:00,
1:15:00,1:30:00,1:45:00and 2:00:00.
It is displayed on the upperrightofthe screen.If sleep timeris
activated itis displayed with the TVstatus and erased with it
after 3 seconds.
SLEEPTIMER
CHILD LOCK
LANGUAGE
OFF
OFF
ENGLISH
If thereis only one minuteleftofthe countdownofthe timer,it
is displayed automaticallyon the upperrightofthe screen,and
stayed there until finishing.Then TV goesautomatically to
stand-by.
ChildLock
You can use this featuretoprevent children turning on TVor
changing programs or adjustments etc. withoutremote con-
trol.
The CHILD LOCK featurecan be setby “ ” or “ ” button to
either ON or OFF.When OFFisselected,therewillbenodiffer-
ence in the operation ofyourTV.WhenON is selected,the TV
can only be controlled bythe remote control handset. Inthis
case,the frontpanel buttons (exceptthe Switch On/Off button)
will not work.
SLEEP TIMER
CHILD LOCK
LANGUAGE
OFF
OFF
ENGLISH
Selecting Menu Language
Menu language can be chosen bypressing “ ”or“ ”button
on LANGUAGE item.
SLEEP TIMER
CHILD LOCK
LANGUAGE
OFF
OFF
ENGLISH
ToStore Settings
In Feature menu all settings are stored automatically.
Install Menu
•Toenterthe Install menu directly,press theBLUE button,or
•Press " " button,now you arein Main menu. In the Main
menu,select“INSTALL.”using “ “or“ ”button.Then enter
the Install menu pressing “ ”or “ ”button.
Selecting Programme
Toselectprogramme number,you can use “ ”or“ ”button,
Digit Buttons or The Double Digit button with digit buttons.
Selecting Band
BAND, can be chosen either,
•VHF1,VHF3 orUHFby“ ”or“ ”button.
Selecting Frequency
The frequency value is,
•044 -890 MHz forband VHF1 -VHF3 -UHF.
FREQUENCY can be changed by “ ”or “ ”button, by the
Digit buttons orbythe Double Digit button withdigit buttons.
Thedecimalvalue infrequencycannotbe changed bythedigit
buttons,itcan be changed onlybythe “ ”or“ ”button.The
value can be “00”, “25”, “50”and “75”.Also changing Fine Tun-
ing changes the decimal part.
Standard
The "STANDARD"setting is fixed to"BG".You cannotchange
this item's setting.
Selecting Search
Tostartthesearchprocess,press “ ” button for forward
search or “ ”button forbackward search.SEARCH item blinks
during search process, since the process is stopped or sig-
nal isfound.Duringsearchprocess thesemi-transparent
menu background becomes "BLUE".Tostop the search pro-
cess “ ” or “ ” button must be pressed again.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (af-
ter coarse adjustment), if you are nothappy about the image
on the screen.
Use “ ”or“ ”button onFINE TUNING item,until getting the
best image on the screen.
ToStore Settings
Press“ ”or “ ”buttonon STOREoptiontostoreInstallmenu
settings.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2611

GB -12-
Programme Menu
• Toenter Programme menu directly,press the " " button,
or
•Press " " button,now you arein Main menu. In the Main
menu, select “PROGRAM.” using “ “ or“ ” button. Then
enter the Programme menu pressing “ ” or “ ” button.
By moving the cursorin fourdirections you can reach 30 pro-
grammes in the same page.By scrolling the pages up ordown
by pressing the navigationbuttons you can selectall the
programmes in TV mode (except the AVmode).
Inmenus,“ “and “ ”buttons areworking like "Direction Up"
and "Direction Down".
By cursor action, programme selection is done automatically.
Selected programme is displayed with“CYAN” characters.In
order to selectprogramme is also possible by using digit or
double-digit button. In this way programme selection is auto-
matic and afterselection the selected programme is displayed
with cyan characters. The TV Status is changed by the pro-
gramme selection too. When using double-digit button in or-
der to select a programme, theProgramme Number in TV
Status OSDis displayed in "P--"form, and by pressing digit
buttons they are displayed in it.
ProgrammeNumber is between00and99.Programme
Namehasanamestringwith 5characters.Afterautostore
process the Programme Namesare setto"PR01"(pro-
gramme number),
At the bottom ofthe menu thereis aprogramme sort functions
section. Each function is activated by colour button (seen be-
low). NAME allows changing the programme name. By DE-
LETE youcandeleteprogrammes thatyoudonotrequire.
INSERT sectionis for inserting programmesintoanother
programme spaces. By selecting AUTOSTORE section,
Autostore menu will be available.
Tochange the nameofaparticular programme,Select thepro-
gramme and push theRED (NAME) button.The firstletterbe-
gins to blink on the selected name. To change that letter“ “
or“ ”button can be used,and toselectthe otherletters,“ ”
or“ ”buttoncan be used.Ifthecursorisatthe lastletterofthe
Programme Name, pressing “ ”button moves the cursorat
the beginning.Onthe contrary,ifthe cursoris atthe beginning
ofthe Programme Name,pressing “ ”buttonmovesthe
cursorat the end.
01 PR01
02
03
04
05
06
07 -----
08
09
10
-----
-----
-----
PR02
PR03
PR04
PR05
PR06
11
12
13
14
15
16
17
18
19
20
--- --
--- --
--- --
--- --
--- --
--- --
--- --
--- --
--- --
--- --
21 -----
22 -----
23 -----
24 -----
25 -----
26 -----
27 -----
28 -----
29 -----
30 -----
AUTOSTOREINSERT DELETENAME
Afterchanging the nameby pressingtheRED button (STORE)
itis stored. Afteractivating the name process the “INSERT”,
“DELETE”and “AUTOSTORE”processes will be inactiveand
"CANCEL"option will be valid. This option cancels the name
process, ifyou do not wish to store the newname.
WhentheGREEN buttonispressed,"NAME", "AUTOSTORE"
and "DELETE"functions areerased, the selected programme
(A) is displayed withgreen characters. From nowon, the au-
tomatic selection is canceled.Cursormoves areindicatedwith
“CYAN”characters.Withnavigationbuttons,theparticularpro-
gram space (B) can beselectedand by pressing the green
button again the programme will be inserted into that space.
All programmes belowthe inserted programme will move
down byone number.
"CANCEL"function cancels the activated "INSERT"process.
For"DELETE"process press the yellowbutton,(“NAME”, “IN-
SERT”and “AUTOSTORE”functions areinactive). Pressing
yellowbutton again erases the selected programme from the
programmelist,andtheprogrammesbelowshiftoneup.
Pressingbluebutton cancelstheactivated “DELETE”process.
ToenterAutostoremenu,press tothe blue button.Tolearnthe
features ofthis function see "AUTOSTORE"below.
Autostore
(A.P.S. :Automatic Programming System)
A.P.S, searches and stores all channels automaticallyon your
TV,according to the transmission of programme systems in
yourarea.
PLEASE CHECK ANTENNACABLE
AUTO. PROGRAMMINGSYSTEM
COUNTRY
STANDARD
START
D
BG
A.P.S.IS RUNNING
P07 VHF1
CANCEL
TocancelA.P.S. before starting,press “
TV
”button.Firstofall
choosethe “COUNTRY”.
The "STANDARD"setting is fixed to"BG".You cannotchange
this item's setting.
This,willeffectthe sort process in A.P.S..Toselect“START”use
“ “ or“ ”button andpress “ ”or“ ”button.TocancelA.P.S..S.
during running press “ ”or “ ”button.
After A.P.S. is finalized,a programmelist will apper on the
screen.In the programme list you will see the programme
numbers andnames assigned to theprogrammes.
If you do not accept thelocations and/or the programme
names of programmes, you can change them in Programme
menu.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2612

GB -13-
OtherFeatures
TV Status
Programme Number, Programme Name (or AV),(theyare
displayed on the upper left of the screen) and Sleep Timer
(shows the time lefton the upper right screen ifenabled). In
stereo options the sound indicatoris displayed withthem too.
They are displayed after programme change for 3 seconds.
Programme Number
Programme Name(5 characters)
TheseOSD’saredisplayedwhenanewprogramme isen-
tered bydigitbutton,bypressing “P<P”button,orby“ “or“ ”
button,orby“
TV
”button.
Programme Swap(P<P)
This button is used to re-enter the preceding entered pro-
gramme again. Pressing "P<P"consecutively allowsto swap
into two last entered programmes.
Double-digit (--)
This OSD is displayed when the "Double-Digit"buttonpressed
in place ofthe programme numberindicator.
Afterthat, in ordertoenteraprogramme press twodigitscon-
secutively.Bothdigitsmustbe entered within 3seconds orthe
function will disappear.
PersonalPreferences(PP)
All the presetvalues will be restored,when pressing "PP".
PictureMode
The picturemode OSDis displayed belowthe sound indica-
tor,byTV Status OSD’s.According tothe WSS data,inside of
the OSD box “4:3”, “16:9”or“AUTO”is written.
Bypressing “ ”button (if Teletext is notactive) the picture
mode can be switched into4:3, 16:9 orAutoMode.
Sound Indicator
Thisis a stereo option.The alternatives of the indicatorare
Mono, Stereo, Dual I and Dual II. This indicator is displayed
under the programme number indicator on the screen. " I-II"
button is used toselect Mono or Stereo, or Dual Ior Dual II.
In Mono broadcast orin forced-mono (for stereo broadcast).
InStereo broadcast.
Ifdualbroadcast detected.DualIis selectedin defaultand also
can be selected after Dual II by Remote Control.
If Dual II selected by RemoteControl.
Sleep Timer Last Minute Indicator
It is displayed on the upperrightofthe screen.If sleep timeris
activated itis displayed with the TVstatus and erased with it
after 3 seconds.
If thereis only one minuteof the countdownleftofthe timer,it
is displayed automaticallyon the upperleft of the screen,and
staysthereuntil time is reached.Then TV goes automatically
tostand-by.
Mute Indicator
Itis placed in the upper middle of the screen when enabled,
and it stays there until it is disabled.
Tocancel mute,therearetwoalternative;thefirstone is press-
ingto" "button,thusvolumeissettothepreceding value,and
the second one is increasing the volume level,thus itstartsat
the minimum level toincrease.By decreasing the volumelevel
in mute state, mute will notbe ignored,only the volume level
will decrease.If muteis cancelled afterdecreasing the volume
level, the volume will return at the decreased level.
No-Signal
No-SignalTimerIndicator
Itis displayed in the middle of the screen when no valid sig-
nal detected. Itshows the time remaining before the switch-
ing tothe Stand-Bymode (it takes 5minutes when no signal
detected or no anyRemote Control command is accessed).
The indicatoris displayed for3seconds when thereis no valid
signal.
AfteraRemoteControl command (if No-SignalTimerisactive)
the timerstops and ifno signal detected again the timeris ini-
tialized to5minutes and starts3seconds lateragain tocount
down.
It is notvalid in AVmode.
Blue Background During No-Signal
Incase,no validsignalisdetected (in TVorAVmode) Blue Back-
ground is activated.During search process Blue Background
is not active. But instead there is another feature given; the
semi-transparentmenubackgroundisbecomesblue.
VolumeBar
Itis displayed in the lowermiddle ofthe screen.When avol-
ume command is received (pressing “VOL+” or “VOL-” by
RemoteControl orFrontpanel)and no menu is active,itstays
on the screen for 3 seconds, afterthe last volume command
or until another command is received in between.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2613

GB -14-
AVModes
By pressing the “ AV “buttonyou canswitchyourTVtoAVV
modes (exceptbeing in Teletext). Pressingthis button con-
secutively will switch the TV in one off the AV modes: AV-1,
F-AV,RGB.
AV-1 supportsthe RGBmode.Butifthereissome colourprob-
lem in AV-1 mode, please force the AV mode toRGB mode.
Inorder toquit the AV mode press the “
TV
” button.
Teletext
Teletextis an information system thatdisplaystexton yourTV
screen.Using the Teletextinformation system you can view a
page of information on asubjectthat is available in the list of
contents (index).
On screen displayis notavailable in text mode.
Contrast, brightness or colourcontrolis not available, but
volume control is available in text mode.
To operate Teletext
•Selecta TVstation on which Teletextis being transmitted.
•Press (TELETEXT)“ ”button.Usuallythe listofcontents
(index)is displayed on the screen.
To select apage of Teletext
•Press the appropriatedigitbuttons forthe required Teletext
page number.
The selected page numberis displayed at the top left corner
of the screen. The Teletext page counter searches until the
selected page number is located, so thatthe desired page is
displayed on the screen.
•Press “ ” button to move the Teletext screen forward one
page at a time.
•Press “ ”button tomovethe Teletextscreen backwardone
page at a time.
To Select IndexPage
•Toselectthe page numberofthe index(generallypage 100),
press “ ” button.
To Select Teletext with a TV Programme
•Press “ ” button.The text is nowsuperimposed over the
programme on the screen.
• Press “ ” button again toreturnto the Teletext page.
Searchingfor a page while watchingTV
• While Teletext Modeison, pressing“ ” will changethe
mode toTV,one more press to“ ” will change the mode
from TV tothe latest Teletextpage weleft. Inthe TV mode enter
apage number using digit keys.Asyou enter digitsfirst line
ofteletext pagewillappearontop screenand willremain
thereuntil the requested page is found.Then teletextline will
be replaced bypage numbertoindicatethatpage has been
found.Now you can displaythis teletextpage pressing “ ”
button.
ToSelect DoubleHeight Text
• Press “ ” button forthe top half ofthe information page to
be displayed in double heighttext.
• Press “ ”“ button again for the bottom half of the informa-
tion page to be displayed in double height text.
•Press “ ”button oncemore forthefull pageofnormalheight
text.
To Reveal“concealed” Information
•Pressing “ ”button once will reveal answers on a quizor
gamespage.
• Pressing“ ”buttonagain willconceal therevealed an-
swers.
To Stop Automatic Page Change
The teletextpage you haveselected may contain moreinfor-
mation than what is on the screen; the rest of the information
will be displayed aftera period of time.
•Press “ ” button to stop the automatic page change.
•Press “ ” buttonagaintoallow thenextpagetobedis-
played.
To Select a SubcodePage
Subcode pages are subsections of long Teletext pages that
can onlybe displayed on the screen one section ata time.
•Select the required Teletextpage.
•Press “ ”button.
•Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
•If the selected subcode page is notdisplayed in ashort time,
press “ ” button. TVprogramme will be displayed on the
screen.
• Teletext page number will be displayed on the upper left
corner ofthe screen when the selected page is found.
• Press “ ” button to display the selected Teletextpage.
Fastext
Your CTV supports the 7pageTeletext system. When the page
number of anyof the 7 pages in memory is entered, thesystem
will not search for the requested page;instead itwill display the
page automatically.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2614

GB -15-
• Press “ ” button tomove the Teletext screen forwardone
page at a time.
• Press “ ” button tomovethe Teletextscreen backwardone
page at a time.
ForFastext
The subject-heading for the information may haveaparticu-
lar colour.
•Press an appropriateRED, GREEN, YELLOWor BLUE but-
ton in order to reach the relevant page quickly.
To exit Teletext
•Press “
TV
”button.The screen will switch to TVmode.
To Displaythe Time
• While watching aTV programme with Teletext transmission
press “ ” button. The current time information, captured
from Teletext will be displayed at the upper middle ofthe
screenfor 5 seconds.
•Iftheprogrammebeingwatcheddoesnothave Teletexttrans-
mission, no iformation will be displayed.
Tips
Care of the Screen
Clean the screen withaslightly damp, softcloth. Do notuse
abrasivesolventsas theymay damage the TV screen coating
layer
Poor Picture
Have you selected the correct TV system? Is your TV set or
house aerial located too closeto the loudspeakers, non-
earthed audio equipmentorneon lights, etc.?
Mountains or high buildings can cause double picturesor
ghost images. Sometimes you can improve the picture qual-
ity by changing the direction of the aerial.
Is the pictureor Teletext unrecognisable? Check if you have
entered the correctfrequency.
Thepicturequality maydegradewhentwoperipheralsare
connected tothe TV atthe same time.Insuch acase,discon-
nect one of the peripherals.
No Picture
Is the aerialconnectedproperly?Are the plugs connected
tightlytothe aerial socket?Is the aerial cable damaged? Are
suitable plugs used toconnect the aerial? If you arein doubt,
consult your dealer.
NoPicture means thatyourTV is not receiving anytransmis-
sion.Haveyou pressedthecorrect keysontheremotecontrol?
Try once more.
Sound
Youcannothearanysound. Didyou perhapsinterruptthe
sound,pressing “ ” key?
Sound is coming from onlyone ofthe speakers.Isthe balance
set to one direction extreme? See SOUNDmenu.
RemoteControl
Your TVno longerresponds to the remote control. Press the
“
TV
” button on the remotecontrol once more. Perhaps the
batteries are exhausted.If so you can still use the local keys
atthe front ofyourTV.
Haveyou selected the wrong menu? Press “
TV
”keytoreturn
toTV mode or press “ ”toreturntothe previous menu.
No solution
Switch your TV set off and on. If this does not work, call the
service personnel; neverattempttorepairityourself.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2615

GB -16-
Specifications
TVBROADCASTING
PALB/G
RECEIVINGCHANNELS
VHF (BAND I/III)
UHF(BAND U)
HYPERBAND
CABLETV (S1-S20 /S21-S41)
NUMBER OFPRESET CHANNELS100
CHANNELINDICATOR
On Screen Display
RFAERIALINPUT
75 Ohm (unbalanced)
OPERATINGVOLTAGE
220-240VAC,50 Hz.
AUDIOOUTPUT
German Stereo
AUDIO OUTPUTPOWER (WRMS.)(%10THD)
2x8
POWERCONSUMPTION(W) (max.)
95
PICTURETUBE
21“ (55 cm.)
DIMENSIONS(mm)
DLH
WEIGHT(kg)
47356344218.5
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p6513.07.2004, 13:2616

Hitachi, Ltd. Tokyo, Japan
International Sales Division
THE HITACHI ATAGO BUILDING,
No. 15 –12 Nishi Shinbashi, 2 –Chome,
Minato –Ku, Tokyo 105-8430, Japan.
Tel: [phone]
HITACHI EUROPE LTD,
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire
SL6 8YA
UNITED KINGDOM
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE S.A.
364 Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREECE
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE GmbH
Munich Office
Dornacher Strasse 3
D-85622 Feldkirchen bei München
GERMANY
Tel: [phone]
Fax: [phone]
Hotline: [phone] (12ct/min)
Email: [e-mail]
HITACHI EUROPE S.A.
Gran Via Carlos III, 86, planta 5
Edificios Trade - Torre Este
08028 Barcelona
SPAIN
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE srl
Via Tommaso Gulli N.39, 20147
Milano, Italia
ITALY
Tel: [phone]
Tel: [phone] Servizio Clienti
Fax: [phone]
Email: [e-mail]
HITACHI Europe AB
Box 77 S-164 94 Kista
SWEDEN
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE S.A.S
Lyon Office
B.P. 45, 69671 BRON CEDEX
FRANCE
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE LTD (Norway) AB
STRANDVEIEN 18
1366 Lysaker
NORWAY
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACH EUROPE AB
Egebækgård
Egebækvej 98
DK-2850 Nærum
DENMARK
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE AB
Neopoli / Niemenkatu 73
FIN-15140 Lahti
FINLAND
Tel : [phone]
Fax: [phone]
Email: [e-mail]
Hitachi Europe Ltd
Bergensesteenweg 421
1600 Sint-Pieters-Leeuw
BELGIUM
Tel: [phone]
Fax: [phone]
Email: [e-mail]
HITACHI EUROPE LTD
Na Sychrove 975/8
101 27 Pr aha 10 –Bohdalec
CZECH REPUBLIC
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.hitachidigitalmedia.com