Hitachi L32HP04U A User manual

GB
Instructions for use
L32HP04U A
32” LCD Colour Television

English - 1 -
Contents
Analogue TV Menu System.................................. 19
Picture Menu..................................................... 19
Sound Menu ..................................................... 20
Feature Menu ................................................... 21
Install Menu ...................................................... 22
Source Menu .................................................... 23
PC Mode Menu System........................................ 23
PC Position Menu............................................. 23
Displaying TV Information .................................... 24
Mute Function....................................................... 24
Picture Mode Selection......................................... 24
Freezing Picture ................................................... 24
Zoom Modes......................................................... 24
Auto .................................................................. 24
16:9................................................................... 24
4:3..................................................................... 25
Panoramic......................................................... 25
14:9................................................................... 25
Cinema ............................................................. 25
Subtitle.............................................................. 25
Zoom................................................................. 25
Teletext................................................................. 25
Tips....................................................................... 26
Image Persistence............................................ 26
No Power.......................................................... 26
Poor Picture...................................................... 26
No Picture......................................................... 26
Sound ............................................................... 26
Remote Control................................................. 26
Input Sources.................................................... 26
Appendix A: PC Input Typical Display Modes.......27
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 28
Specifications ....................................................... 29
DVB-T functionality information............................ 30
Product Guarantee............................................... 31
Accessories............................................................ 2
Features ................................................................. 2
Preparation............................................................. 2
Safety Precautions ................................................. 2
Power Source..................................................... 3
Power Cord......................................................... 3
Warning .............................................................. 3
Disconnecting the Device...................................3
Moisture and Water ............................................ 3
Cleaning.............................................................. 4
Heat and Flames ................................................ 4
Lightning............................................................. 4
Replacement Parts............................................. 4
Servicing............................................................. 4
Waste Disposal................................................... 4
Information for Users in European Union
Countries ............................................................ 4
Headphone Volume............................................ 4
Installation........................................................... 4
LCD Screen........................................................ 4
Connection to a Television Distribution System
(Cable TV etc.) from Tuner.................................4
Environmental Information...................................... 5
Overview of the Remote Control ............................ 6
LCD TV and Operating Buttons.............................. 7
Viewing the Connections- Back Connectors .......... 7
Viewing the Connections - Side Connectors..........8
Power Connection.................................................. 8
Aerial Connection................................................... 8
Connecting the LCD TV to a PC............................. 9
Connecting to a DVD Player................................... 9
Using the Cable Holder .......................................... 9
Using Side AV Connectors ...................................10
Connecting Other Equipment via Scart................ 10
Inserting Batteries into the Remote Control
Handset................................................................ 10
Switching the TV On/Off.......................................10
To Switch the TV On......................................... 10
To Switch the TV Off......................................... 10
Input Selection.......................................................11
Basic Operations...................................................11
Operation with the Buttons on the TV................11
Initial Settings........................................................11
General Operation................................................ 12
Electronic Programme Guide (EPG) .................... 12
Displaying Subtitles .......................................... 12
Digital Teletext (** for UK only) ......................... 13
Analogue Teletext............................................. 13
Widescreen....................................................... 13
IDTV Menu System .............................................. 13
Channel List...................................................... 13
Timers............................................................... 15
Conditional Access ........................................... 15
TV Setup........................................................... 15
Setup ................................................................ 15
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 100_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1 21.10.2010 16:49:1921.10.2010 16:49:19

English - 2 -
Accessories
TV DTV
M
INFO
123
456
789
0-/--
EXIT
SWAP
P<P I-II
SOURCE
AV
/
/
GUIDE
WIDE
PP
OK
SELECT
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
P+
P -
+
RC 1050
Remote
Controller
Batteries: 2 X AAA
Instruction Book
Quick Guide
Cable Holder
Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• HDMI connector for digital video and audio. This
connectionisalsodesigned toaccept highdefinition
signals.
•200 programmes from VHF, UHF(analogue).
• 500 programmes for digital mode (IDTV).
• OSD menu system.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system.
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
•Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
•When no validsignal isdetected, after 5minutes the
TV switches automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98,ME,2000,XP, Vista.
• Game Mode.
Introduction
Thank you for choosing this product.This manual will
guide you for the proper operation of your
TV. Before operating the TV, please read
this manual thoroughly.
Please do keep this manual in a safe place
for future references.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
SOME DOSAND DON’TS ON THE SAFE USE
OF EQUIPMENT
Thisequipmenthas beendesignedand manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken if you are to
obtain the best results and safety is to be assured.
**************
DO readthe operatinginstructions before youattempt
to use the equipment.
DO ensure that all electrical connections (including
themainsplug, extensionleads andinter-connections
between the pieces of equipment) are properly
made and in accordance with the manufacturer’s
instructions. Switch off and withdraw the mains plug
before making or changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DO route the mains lead so that it is not likely to be
walkedon,crushed, chafed,or subjected toexcessive
wear and tear or heat.
**************
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 200_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 2 21.10.2010 16:49:2021.10.2010 16:49:20

English - 3 -
Power Source
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet.
Power Cord
Do not place the set, a piece of furniture, etc. on the
powercord (mainslead) orpinch the cord.Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
powercord withwet handsas thiscould causea short
circuitor electricshock. Nevermake aknot inthe cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on.Adamaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
This TV receiver is supplied with a moulded mains
plug. The mains plug must not be cut off, as it may
contain a special radio interference filter, the removal
of which could lead to impaired performance. If you
wish to extend the lead, obtain an appropriate safety
approved extension lead or consult your dealer.
Observe the manufacturers instructions when
connectingextension leads to the set.Check the fuse
rating on the new plug; this should be fitted with a 5
Amp fuse which conforms to either ASTA or BSI
(BS1362) approvals, these are easily identifiable by
either the ASA or symbols. If you are in any doubt
about the installation of an extension lead, please
consult a competent electrician.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
anddo notplaceobjects filledwith liquids,
such as flower vases, on top. Avoid from
dripping or splashing.
Ifanysolid objector liquidfalls into thecabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipmentwithitemssuchasnewspapers,tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to
drippingorsplashing,or objectsfilledwithliquids,such
as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DON’T use makeshift stands and NEVER fix legs
with wood screws - to ensure
complete safety always fit the manufacturer’s
approved stand or legs with the fixings
provided according to the instructions.
DON’T use equipment such as personal stereos or
radios so that you are distracted from
the requirements of traffic safety. It is illegal to watch
television whilst driving.
DON’T listen to headphones at high volume, as such
use can permanently damage your
hearing.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated
that it is designed for unattended operation or has a
stand-by mode. Switch off using the
switch on the equipment and make sure that your
family know how to do this. Special
arrangements may need to be made for infirm or
handicapped people.
DON’T continue to operate the equipment if you are
in any doubt about it working
normally, or if it is damaged in any way - switch off,
withdraw the mains plug and consult
your dealer.
ABOVE ALL
--- NEVER let anyone especially children
push anything into holes, slots or any other
opening in the case - this could result in a
fatal electrical shock;
--- NEVER guess or take chances with
electrical equipment of any kind
--- it is better to be safe than sorry!
*************
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 300_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 3 21.10.2010 16:49:2221.10.2010 16:49:22

English - 4 -
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
Ventilation
Theslots and openings on theTVset are intended for
ventilationandto ensurereliableoperation.Toprevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
Theset shouldnot beplaced near toopen
flames and sources of intense heat such
asan electric heater.Ensure that noopen
flame sources, such as lighted candles,
are placed on top of the TV. Batteries
should not be exposed to excessive heat
such as sunshine, fire or the like.
Lightning
Beforeastormandlightningorwhengoing
onholiday, disconnectthe powercordand
aerial lead from the wall sockets.
Replacement Parts
Whenreplacement partsare required,make surethat
the service technician has used replacement parts,
which are specified by the manufacturer or have the
samespecifications asthe originalone. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
shouldprincipally berecycled. Packagingmaterials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
Information for Users in European
Union Countries
The above mark is in compliance with
the Waste Electrical and Electronic
Equipment Directive 2002/96/
EC (WEEE). The mark indicates
the requirement NOT to dispose
the equipment including any spent
or discarded batteries as unsorted
municipal waste, but use the return
and collection systems available. If the batteries or
accumulators included with this equipment display
thechemical symbolHg, Cd, or Pb, thenit meansthat
the battery has a heavy metal content of more than
0.0005% Mercury, or more than 0.002% Cadmium or
more than, 0.004% Lead.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attachedto thewall inaccordance withthe installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
TheLCD panel isa very hightechnology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Connection to a Television
Distribution System (Cable TV etc.)
from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
throughotherapparatuswithaconnectiontoprotective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 400_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 4 21.10.2010 16:49:2221.10.2010 16:49:22

English - 5 -
Environmental Information
• This television has been designed to be environmentally friendly by consuming less energy.
You will not only help to save the environment but you can also save money by reducing electricity bills thanks
to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following
steps:
• You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode to On,
the TV will switch to energy-saving mode and brightness level of TV set will be set to the optimum level for
home viewing.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or remove the mains plug from the wall socket. This will also
reduce energy consumption.
• Also remove the mains plug from the wall socket when you are away from home for long period of time.
• Please help us to save the environment by following these steps.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 500_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 5 21.10.2010 16:49:2321.10.2010 16:49:23

English - 6 -
Overview of the Remote Control
TV DTV
M
INFO
123
456
789
0-/--
EXIT
SWAP
P<P I-II
SOURCE
AV
/
/
GUIDE
WIDE
PP
OK
SELECT
ABC DEF GHI
JKL MNO PQR
STU VWX YZ
P+
P -
+
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
RC 1050
Standby1. Cursor up2. Cursor right3. Info4. Numeric buttons5. Exit (in DTV mode)6. Programme up / Page down (in DTV mode)7. Volume up8. TV / Digital TV9. AV / Source10. Yellow (Feature menu) / Current language (in11. DTV mode) (*)
Blue (Install menu)12. Hold (in TXT mode) / No function13. Update (in TXT mode) / No function14. Index page / Electronic Programme Guide (in15. DTV mode)
Reveal (in TXT mode) / Switch from TV to PC16. Expand (in TXT mode) / Image size17. Mix (in TXT mode) / No function18. Teletext / PAT19. Time / Subtitle on-off (in DTV mode) (**)20. Red (Sound menu)21. Green (Picture menu)22. Previous programme23. Mono/Stereo - Dual I-II24. Programme down / Page up (in DTV mode)25. Volume down26. Picture mode selection27. OK / Select28. Cursor down29. Cursor left30. Menu on/off31. Mute32. (*) Only available for EU country options.
(**) Only available for UK.
Remote range is approximately 7m/23ft
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 600_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 6 21.10.2010 16:49:2321.10.2010 16:49:23

English - 7 -
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
menu
meu
n
Standby button1. TV/AV button2. Programme Up/Down3. buttons
Volume Up/Down buttons4.
Note: Press “ ” /“ ”
buttonsat the sametime to view
main menu.
Viewing the Connections- Back Connectors
SCART socket inputs or outputs for external devices.1. Connect the SCART cable between SCART socket on TV and SCART
socket on your external device (such as a decoder, a VCR or a DVD
player).
Note: If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.
PC Input is for connecting a personal computer to the TV set.2. Connect the PC cable between the PC INPUT on the TV and the PC
output on your PC. Please do not connect a device to YPbPr socket
while using PC input.
S/PDIF Coaxial Out3. outputs digital audio signals of the currently watched source.
RF Input connects to an antenna or a cable.4. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
HDMI5. 2: HDMI input
HDMI6. 1: HDMI input
HDMI Input is for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would definitely recommend to plug all your cables into the
back of the LCD before mounting to the wall.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 700_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 7 21.10.2010 16:49:2421.10.2010 16:49:24

English - 8 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the1. channels that you subscribe to. For more information, see “Conditional
Access” section.
Component Video Inputs (YPbPr)2. are used for connecting component
video.You can connect the component video and audio sockets with
a device that has component output. Connect the component video
cables between the COMPONENT VIDEO INPUTS on on the TV and the
component video outputs of your device. While connecting, be sure that the
letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.
IMPORTANT:Please do not connect a deviceto PC socket while usingYPbPr input.
Video Input is used for connecting video signals of external devices.3. Connect the video cable between the VIDEO IN socket on the TV and the
VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices.4. Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device.
Also to enable YPbPr sound connection in such a case, use an appropriate
audio cable between the connected device’s audio outputs and the TV’s
audio inputs
Note: If you connect a device to the TV via the VIDEO or YPbPr cable you
should also connect your device with an audio cable to the AUDIO INPUTS
of the TV to enable audio.
Headphone jack is used for connecting an external headphone to the system. Connect to the5. HEADPHONE jack to listen to the TV from headphones.
6. , switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to theAERIAL INPUT socket located at the rear of the TV.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 800_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 8 21.10.2010 16:49:2521.10.2010 16:49:25

English - 9 -
Connecting the LCD TV to a
PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC
to the LCD TV.Use an audio cable between audio
inputs of the TV (side) and audio output of your PC
to enable sound connection.
• When the connection is made, switch to PC source.
See “Input selection” section.
•Settheresolutionthatsuitsyourviewingrequirements.
Resolutioninformation canbe foundin theappendix
parts.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable
(not supplied)
to PC input
Audio
Inputs
PC Input
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can
connectvia HDMI. Whenyou connectto DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component
videocable to connectvideo input.Toenable sound
connection, use AUDIO IN located side of the TV
(YPbPr cable is not supplied).
• When the connection is made, switch to YPbPr
source. See, “Input selection” section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
HDMI
inputs
Scart socket
Component
audio
inputs
DVD Player
This cable is
not supported.
Note: These methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
Using the Cable Holder
You can use the supplied cable holder as the
following:
• Place the cable holder into the cable holder hole
located on the rear side of the TV as illustrated
above.
•Place cablesinto thecable holder afterall necessary
connections are made.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 900_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 9 21.10.2010 16:49:2621.10.2010 16:49:26

English - 10 -
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and theAUDIO SOCKETS. For selecting
the related source, see the section “Input selection”
in the following parts.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV
Camcorder
Headphone
Connecting Other Equipment
via Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to
your LCD TV by using the SCART socket. Note that
cables shown in the illustration are not supplied.
Power off both theTV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
SCART socket
Decoder
DVD Recorder Video Recorder
Inserting Batteries into the
Remote Control Handset
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
Note:Remove the battery from remote control handset when
it is not to be used for a long period. Otherwise it can be
damaged due to any leakage of batteries.
Switching the TV On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz.
• Switch the “ ” button to position “|” so the TV
will switch to standby mode. Then the standby LED
lights up.
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
• Press the “ ” or +/- button on the TV.
The TV will then switch on.
Note:If you switch on yourTV via PROGRAMME UP/DOWN
buttonsonthe remote controloron theTVset, theprogramme
that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “ ” button to position 2 as illustrated,
so the TV will switch OFF.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note:WhentheTV is switchedtostandby mode, standbyLED
can blink to indicate that features such as Standby Search,
Over Air Download or Timer is active.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1000_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 10 21.10.2010 16:49:2821.10.2010 16:49:28

English - 11 -
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press SOURCE/ button on your remote control
for directly changing sources.
or
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“”button tohighlight an inputand press“ ” button
to select.
Note: You can mark desired source options by pressing
the OK button. Therefore, when SOURCE/ button is
pressed, only the marked source options will be available
(except for the TV source).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “ ” button to decrease volume or
buttontoincreasevolume,soavolumelevelscale(slider)
will be displayed on the screen.
Programme Selection
•Press“P/CH+”buttontoselectthenextprogrammeor“P/
CH -” button to select the previous programme.
Viewing Main Menu
•Press“”/“ ”buttonsatthesametimetoview
mainmenu. IntheMainmenuselectsub-menuusing“P/
CH-”or“P/CH +” buttonsandenterthe sub-menuusing
“” or “ ” buttons. To learn the usage of the
menus, refer to the menu system sections.
AV Mode
• Press the “TV/AV” button in the control panel on the TV
to switch betweenAV modes.
Operation with the Remote Control
• The remote control of yourTV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
•Press “ ”button to increase the volume.Press
“ ” button to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
•Pressnumericbuttons ontheremotecontrol toselect
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between10-500 (for IDTV)or 10-199(for analogue),
press the numeric buttons consecutively
• Press directly the programme number to reselect
single digit programmes
Initial Settings
When the TV is turned on for the first time, the menu
forthe language selectionappears onthe screen.The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
By pressing the “ ” or “ ” buttons highlight the
language you want to set and press OK button.After
then, “First time installation” OSD will appear on the
screen. By pressing “ ” or “ ” buttons, select the
country you want to set and press OK button (* for
EU countries).
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press the “OK”
button.
TheIDTV willautomatically tuneto theUHF orVHF(*)
(*ForEUcountriesexcept UK)transmission channels,
searching for digital terrestrial TV broadcasts and
displayingthe namesof channelsfound.This process
will take about a few minutes.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1100_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 11 21.10.2010 16:49:2921.10.2010 16:49:29

English - 12 -
After Automatic Search is completed, the following
messageaskingforanalogue channelsearchappears
on the screen:
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. The menu is
displayed to search for analogue channels.
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
Formoreinformationonthisprocess,see“InstallMenu”
section.
Note:Forproperfunctioning ofdigitalteletextinDTVmode,you
should set country as UK in analogue AUTO PROGRAM (for
UK broadcasts only).
Do not turn off the TV while initializing first time installation.
General Operation
Pressthe“SOURCE/ ” buttonontheremote control
andselectDTV to switchtheTVsetto digitalterrestrial
television broadcasting.
Information Banner
• Whenever you change channel, using the P- / P+
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen (available only in DTV
mode). This will remain on the screen for a few
seconds.
• The information banner can also be displayed at
any time while watching TV by pressing the “INFO”
button on the remote control:
If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
Electronic Programme Guide (EPG)
• Some, but not all, channels send information about
the current and next events. Press EPG button to
view the EPG menu. EPG appears on the screen. It
is able to get Information of the channel - programs
weekly by means of 7-DAY-EPG. All programs of
channelsaredisplayed.On thebottomof thescreen;
info bar, showing all the available commands, will
be displayed.
RED button (Shrink): makes the info boxes smaller.
GREEN button (Expand): makes the info boxes larger.
YELLOWbutton(Prev.Day):displaystheprogrammes
of previous day.
BLUE button (Next day): displays the programmes of
the next day.
INFO (Details): displays the programmes in detail.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
OK : view for current broadcast/reminders for future
programs.
P<P : jumps to the current broadcast.
• Press “0” button on the remote control to view Guide
Search menu. Using this feature, you can search the
programme guide database in accordance with the
genre selected or with name match.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are being broadcasted with subtitles.
Pressthe“M”buttontodisplaythemainmenu,highlight
the Setup and then Language menu using “ ” or “ ”
buttonandpresstheOKbuttontodisplaythe“Language
settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use ” or “ button to set Subtitle to the
desired language.
If“Subtitle” ison anda languageoption isset, pressing
the “ ” button causes the following warning message
display on the screen (** for UK only):
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1200_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 12 21.10.2010 16:49:2921.10.2010 16:49:29

English - 13 -
Digital Teletext (** for UK only)
• Press the “ ” button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press “SELECT” button or similar message
appears on the screen, press the OK button.
• When the “ ” button is pressed, the TV returns to
television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
additionto digitalteletext broadcastingtogether with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the “ ” button again, the digital
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the “ ”button repeatedly to
change screen format.
WhenAuto is selected, the format being displayed is
determined by the picture being broadcasted.
PLEASE NOTE: Menu size changes depending on the
chosen image size.
Notice !
AC3 audio type is not supported. In this case, Tv
sound will be muted. If the broadcast includes AC3
stream, the following warning message will be
displayed on the screen:
If there is no audio available, the following warning
message will be displayed on the screen:.
IDTV Menu System
Press the “M” button. Main menu will be displayed.
Channel List
Usingthe“ ”or“ ”buttonontheremotecontrol,make
sure that the first item, Channel List, is highlighted and
press the “OK” button to display the Channel List.
Navigating the Entire Channel List
Press“ ”or“ ”buttonforselectingthepreviousornext
channel. You can press “RED” or “GREEN” button to
move page up or page down.
Towatch a specificchannel,highlight it using “ ”or “
” button and then press “OK” button, while the “Select”
item on Channel List menu is highlighted by using “
” or “ ” button.
Then thename and numberof theselected channelwill
be displayed in the top-left and top-right of the channel
display at the top-right of the screen, respectively.
Moving the channels in the channel list
• Press “ ” or “ ” buttons to select the channel that
will be moved.
• Press “ ” or “ ” buttons to select the “Move” item on
Channel List menu.
Following OSD will be displayed next to “OK” item
to indicate that enter a number by using the numeric
buttons on the remote control and press “OK” to
confirm.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1300_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 13 21.10.2010 16:49:3021.10.2010 16:49:30

English - 14 -
Note:Ifyou enter thesameprogramme number ofthechannel
that you want to move, “.... channel services will be replaced.
Do you want to continue?” OSD will be displayed. Press OK
to confirm or select “No” to cancel.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel that
will be deleted.
• Press “ ” or “ ” button to select the “Delete’’ item
on Channel List menu.
• Press the “OK” button to delete the highlighted
channelin the channellist.Then themessage below
appears on the screen:
• Press “ ” or “ ” button to highlight the desired
option. If “OK” button is pressed while “Yes” is
highlighted, the highlighted channel is deleted.
Selecting “No” cancels the deletion.
Renaming Channels
To rename a specific channel, the channel must
be highlighted by pressing “ ” or “ ” button. Then
highlight the Edit Name item by pressing “ ” or “ ”
button as illustrated below. Press the “OK” button to
activate the rename feature.
Nowpressing“ ” or“ ”button movestothe previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
Pressthe“M”button tocancel theeditingor OKbutton
to save the new name.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order to
lock a channel you should know the parental lock
password (default value is set to 0000 in the factory
and can only be changed from the Configuration
menu).
Select the channel to be locked by highlighting it and
select the Lock option by pressing “ ” or “ ” button.
Whenthe“OK”button ispressed,adialogOSD asking
for the password will be displayed.
Enter the password by using the numeric buttons on
the remote control. The lock icon “ ” will now be
displayed next to the selected channel. Repeat the
same operation to cancel the lock.
Setting Favourites
Toseta favouriteyou shouldhighlight the “Favourites”
item at the bottom of the Channel List menu. Then
press “OK” button and Edit Favourite List menu
appears on the screen.
How to Add a Channel to a Favourites List
•Bypressing “ ”or “ ”buttons, highlight thechannel
that you want to add to the favourite list.
• By pressing “OK” button, the highlighted channel is
added to the Favourite List.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1400_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 14 21.10.2010 16:49:3121.10.2010 16:49:31

English - 15 -
•F iconindicates thata channelis added toFavourite
List.
Removing a Channel from Favourite List
• Highlight the channel that you want to remove from
thefavourite listand pressOK buttonto remove.You
can press “OK” button again to re-add a channel.
•To activate Favourites, go tothe Configurationmenu
and select Favourite mode. Use “ ” / “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
On Screen Help
For all menus, press the INFO button to display the
help information about the menu functions.
Program Guide
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
Timers
To display timers window, activate the item from the
mainmenu.Toadd atimer, press theYELLOW button
on the remote control. Then “Add Timer” window
appears.
Channel: “ ” or “ ” keys will navigate the user
through the TV or Radio list.
Date:Starting date isentered via theLeft/Right or the
numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Change/Delete:permitsorprohibits anymodifications
for other users.
Duration: Duration between Start and End time.
Repeat: You can set a timer to be repeated as Once,
Daily or Weekly.
You cansavetheadjustmentsby pressingtheGREEN
keyorcancel theprocessby pressingthe RED button.
You can edit the list via GREEN key and delete with
the RED button.
Conditional Access
• Press the “M” button to display the main menu and
use the “ ” or “ ” button to highlight the “Conditional
Access” line and press the “OK” button:
Some Digital Terrestrial channels operate on a Pay
Per View basis. These require a subscription and a
hardware decoder.
Obtain the Conditional Access Module (CAM) and the
viewing card by subscribing to a pay channel company,
then insert those to the TV using the following procedure.
• Switch off the TV and unplug from the mains.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or theTV terminal
may be damaged if the CAM is forcefully inserted.
•ConnecttheTVtothemainssupply,switchonandthen
wait for few moments until the card is activated.
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Conditional
Access then pressing the “OK” button. (CAM set up
menu is not displayed when it is not required.)
• To see the viewing contract information: enter IDTV;
pressthe“M”button,thenhighlightConditionalAccess
and press the “OK” button.
• When no module is inserted, “No Conditional Access
module detected” message appears on the screen.
• Refer to the module instruction manual for details of
the settings.
Note: Insert or remove the CI module only when the TV is
switched off or in standby mode.
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from
the main menu. Press the “M” button to display the
main menu and use “ ” or “ ” button to highlight “TV
Setup”, press the “OK” button to display TV Setup
menu screen.
You can find detailed information for all menu items in
“Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the following:
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1500_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 15 21.10.2010 16:49:3221.10.2010 16:49:32

English - 16 -
Configuration
You can configure the settings of your TV. Select
Configuration from Setup menu and press “OK” to
view this menu. Press the “RETURN” button on the
remote control to exit.
Dolby D Digital (*for EU countries except
UK)
In the Configuration Menu, highlight the Dolby D item by
pressing “”or “ ” buttons. Use the “ ” or “ ” buttons
to set the Dolby D Digital as On or Off. If the channel that
you are watching supports Dolby Digital,you can turn this
setting on.
Hard of Hearing (*for EU countries except
UK)
Use “ ” or “ ” button to select Hard of Hearing and
then press “ ” or “ ” button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press “ ” / “ ” button to set this function as
on or off.
Channel List
Use “ ” or “ ” buttons to go to Channel List option.
Use “ ” or “ ” buttons to toggle Channel List Mode.
If you select “TV Only”, with the “ ” or “ ” buttons,
you navigate through only TV channels. If you select
“RadioOnly”,withthe “ ”or “ ” buttons,you navigate
throughonly radiochannels. If youselect “Text Only”,
withthe “ ”or “ ” buttons,you navigatethrough only
text channels.
Scan Encrypted
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
settingis on, searchprocess will locatethe encrypted
channelsas well.IfitissetasOFFmanually,encrypted
channelswill notbe located whilein automaticsearch
or manual search.
Use “ ” or “ ” button to select Scan Encrypted and
then press “ ” or “ ” button to set this setting as
On or Off.
Receiver Upgrade
Over Air Download (OAD)
This feature helps to keep your TV updated. It works
This feature helps to keep your TV updated. It works
automatically and searches for new information
automatically and searches for new information
when available. Note that this setting is inactive to be
when available. Note that this setting is inactive to be
modified
modified
.
.Please ensure that the TV is set to standby
mode. The TV automatically powers up at 3.00 A.M.
eachday andsearches forany newinformation which
may be broadcasted and will download this to your
receiver automatically. This operation will normally
take approximately 30 minutes.
Note: Your TV may start in First Time Installation mode after
OAD update.
Parental Control
Use “ ” or “ ” buttons to go to Parental Lock option.
Press OK button to enter the menu. A dialog box
askingfor thelockkey willbe displayed.The keyis set
to “0000” initially. Enter PIN. If it is incorrect, “Wrong
Pin”OSD willbe displayed.If itis correct, the Parental
Control menu will be displayed:
Maturity Lock (*)
(*) If you set Country option as UK in the first time
installation, Maturity Lock option will not be visible.
This setting is available only for EU countries.
When set, this option gets the maturity information
fromthebroadcastand ifthismaturitylevel isdisabled,
does not show video-audio.
Menu Lock
In menu lock you can set locking for all menus, or the
Installation Menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system. Use “ ” or “ ” buttons to go to
Menu Lock option. Use “ ” or “ ” buttons to choose
Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with
the correct lock key. So the user cannot add, delete,
rename, channels, cannot set timers.
INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels. Changes will be
updated after exiting ‘Configuration Menu’.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option.
Press “OK” to display the “Set PIN” window. Use
numericbuttonsto enter newpinnumber youwillneed
to input your new pin a second time for verification
purposes.The factory default pin number is 0000, if
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1600_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 16 21.10.2010 16:49:3221.10.2010 16:49:32

English - 17 -
you change the pin number make sure you write it
down and keep it safe.
Time Settings (optional)
Inthe configuration menu,highlight theTime Settings
item by pressing “ ” or “ ” buttons.
Press “OK” and Time Settings sub menu will be
displayed on the screen. Current Time,Time Zone
Setting and Time Zone will be available.
Use “ ” or “ ” buttons to highlight the Time Zone
Setting. Time Zone Setting is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL.
WhenAUTOisselected, CurrentTimeandTime Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone Setting, Time
Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to the
selected Time Zone.
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,
describingwhat is happeningon thescreen duringthe
natural pauses in the audio (and sometimes during
dialogue, if deemed necessary). You can use this
feature,onlyif the broadcastersupportsthat additional
narration track. Use “ ” or “ ” buttons to select an
item. Then use “ ” or “ ” buttons to set.
Audio Description
Thisfunctionenables ordisablesthe audio description
feature by pressing the “ ” or “ ” buttons.
Preferred Language
Bypressing the“ ” or“ ” buttonsthe preferred audio
description language is being changed.
This setting can be used, only if it is available.
Relative Volume
Using this option, theAudio Description volume level
can be increased or decreased relatively, according
to the general volume.
Standby Search (optional) (*)
(*)This setting isvisible only when the Countryoption
is set to Denmark, Sweden, Norway or Finland.
Use “ ” or “ ” button to select Standby Search and
thenpress“ ” or“ ” buttontoset thissetting asOnor
Off.If you change Standby Searchto Off,this function
will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Language
In this menu the user can adjust the preferred
language. Language is changed by pressing “OK”
button.
Menu: shows the language of the system
Preferred
Thesesettings willbe used ifavailable. Otherwisethe
current settings will be used.
• Audio: by pressing “ ” or “ ” keys change the
audio language.
• Subtitle: alter the subtitle language with “ ” or “
” keys. The chosen language will be seen in
subtitles.
Movie Subtitle (optional)
• In order to display subtitles properly, use this setting
to select a movie subtitle language.
• By pressing “ ” or “ ” button, select the desired
language option.
• Guide: By pressing “ ” or “ ” buttons change the
guide language.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1700_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 17 21.10.2010 16:49:3321.10.2010 16:49:33

English - 18 -
Current
• Audio: if audio language is supported change the
audio language by pressing “ ” or “ ” buttons
• Subtitle: if subtitle is backed up, alter the subtitle
language with “ ” or “ ” buttons. The chosen
language will be seen in subtitles.
Note: If the Country option is set to Denmark, Sweden,
Norwayor Finland, theLanguage Settings menuwill function
as described below:
Language Settings
In the configuration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
“OK” and Language Settings submenu will be
displayed on the screen:
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes:
• System Language determines the on-screen menu
language.
•Audio Languageis usedfor selectingthe soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Installation
The Installation menu is mainly intended to help you
forcreating a ChannelTable in the most efficient way.
Select Installation from the Configuration menu by
pressing “ ” or “ ” buttons.
This menu includes the following items:
(*) For Denmark, Sweden, Norway or Finland.
Automatic Channel Scan
Automatic channel scan is started by pressing
“OK” button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
Highlight Yes or No by using “ ” or “ ” buttons and
press “OK” button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the “OK” button to search for analogue
channels. The following menu appears on the screen
for analogue channel search:
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
“OK” or RED button to continue. To cancel, press
BLUE button. The following menu will be displayed
during the automatic tuning:
AfterAPSisfinalized,the programmetablewill appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1800_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 18 21.10.2010 16:49:3421.10.2010 16:49:34

English - 19 -
Manual Channel Scan
In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for thechannels. For eachvalid channelnumber, signal
level and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Clear Service List (*)
(*)This setting isvisible only when the Countryoption
is set to Denmark, Sweden, Norway or Finland.
Usethissettingto clearchannelsstored.Press “ ” or“ ”
buttontoselectClearServiceListandthenpressOK.The
following OSD message will be displayed on the screen:
PressOK tocancel. SelectYesby pressing “ ” or “ ”
button and press OK to delete all of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time
Installation” menu item and press “OK” button,
then you will be asked whether or not to delete the
settings. Selecting “Yes” by pressing “OK” button
while the “Yes” is highlighted will delete the existing
channel table.
Then you will be asked to confirm for deleting all
channels and settings:
By selecting Yes and pressing the “OK” button, the
existing channel table will be deleted. After factory
settings are loaded, “First Time Installation” menu
will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using “ ” or “ ”
buttons,selectthe desiredlanguageoption, andpress
OK button to activate.
Afterthen, “First time installation” OSDwill appear on
the screen. By pressing “ ” or “ ” buttons, select the
Country you want to set and press “OK” button (*For
EU countries except UK).
Pressthe “OK”buttonto startinstallation.After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen.This process is same as described in
Automatic Search section..
Analogue TV Menu System
Picture Menu
Mode
Foryourviewing requirements,youcan settherelated
mode option.
Press “ ” or “ ” button to select Mode. Press “
” or “ ” button to choose from one of these options:
Cinema, Dynamic and Natural.
Brightness/Contrast/Colour/Sharpness/
Hue
Press “ ” or “ ” button to select the desired option.
Press “ ” or “ ” button to set the level.
Note: Hue option can only be visible when the TV receives
an NTSC signal.
Colour Temp
Press“ ” or “ ”button toselect Colour Temp. Press
“” or “ ” to choose from one of these options: Cool,
Normal and Warm.
Note:
• Setting Cool option gives white colours a slight blue
stress.
• Setting Warm option gives white colours a slight red
stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
Press “ ” or “ ” button to select Noise Reduction.
Press“ ” or “ ” to choosefrom one of theseoptions:
Low, Medium, High or Off.
00_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 1900_MB45M_[GB]_1050UK_IDTV_NICKEL13_32856W_10070988_50179315.indd 19 21.10.2010 16:49:3421.10.2010 16:49:34